ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf

上传人:ideacase155 文档编号:741390 上传时间:2019-01-11 格式:PDF 页数:33 大小:226.80KB
下载 相关 举报
ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf_第1页
第1页 / 共33页
ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf_第2页
第2页 / 共33页
ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf_第3页
第3页 / 共33页
ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf_第4页
第4页 / 共33页
ETSI TS 124 606-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Message Waiting Indication (MWI) using IP Multimedi.pdf_第5页
第5页 / 共33页
点击查看更多>>
资源描述

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelMessage Waiting IndicCore NeProt(3GPP TS 24.6TECHNICAL SPECIFICATION124 606 V13.0.0 (2016communications system (Phaelecommunications System (LTE; dication (MWI) using IP Multimetwork (CN) subsystem; rotocol specification .606 version 13.0.0 Releas

2、e 1316-01) hase 2+); (UMTS); timedia (IM) 13) ETSI ETSI TS 124 606 V13.0.0 (2016-01)13GPP TS 24.606 version 13.0.0 Release 13Reference RTS/TSGC-0124606vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N

3、 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The c

4、ontent of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable D

5、ocument Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.

6、org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical,

7、including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standa

8、rds Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are

9、Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 124 606 V13.0.0 (2016-01)23GPP TS 24.606 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these ess

10、ential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updat

11、es are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serve

12、r) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identitie

13、s or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not

14、“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct cita

15、tion. ETSI ETSI TS 124 606 V13.0.0 (2016-01)33GPP TS 24.606 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Message Wai

16、ting Indication (MWI) . 8g34.1 Introduction 8g34.2 Description . 8g34.2.1 General description . 8g34.3 Functional entities 8g34.3.1 User Equipment (UE) . 8g34.3.2 Application Server (AS) . 8g34.4 Roles . 8g34.4.1 MWI Subscriber User Agent (MSUA) . 8g34.4.2 MWI Notifier User Agent (MNUA) . 8g34.4.3 M

17、essage Account (MA) 9g34.4.3.0 General 9g34.4.3.1 Identification of the message account for the message deposit . 9g34.4.3.2 Identification of the message account for the MWI subscription 9g34.5 Operational requirements . 9g34.5.1 Provision/withdrawal 9g34.5.2 Requirements on the originating network

18、 side 9g34.5.3 Requirements in the network 9g34.5.4 Requirements on the terminating network side . 9g34.6 Coding requirements 9g34.7 Signalling requirements 10g34.7.1 Activation/deactivation . 10g34.7.1A Registration/erasure 10g34.7.1B Interrogation . 10g34.7.2 Invocation and operation 10g34.7.2.1 A

19、ctions at the MSUA 10g34.7.2.2 Void. 11g34.7.2.3 Void. 11g34.7.2.4 Void. 11g34.7.2.5 Actions at the MNUA . 11g34.7.2.6 Void. 11g34.7.2.7 Void. 11g34.7.2.8 Void. 11g34.7.2.9 Void. 11g34.8 Interaction with other IMS capabilities 11g34.8.1 Void 11g34.8.2 Void 11g34.9 Interaction with other services 11g

20、34.9.1 Communication Hold (HOLD) . 11g34.9.2 Terminating Identification Presentation (TIP) 11g34.9.3 Terminating Identification Restriction (TIR) 11g34.9.4 Originating Identification Presentation (OIP) . 12g34.9.5 Originating Identification Restriction (OIR) . 12g34.9.6 CONFerence calling (CONF) . 1

21、2g3ETSI ETSI TS 124 606 V13.0.0 (2016-01)43GPP TS 24.606 version 13.0.0 Release 134.9.7 Communication DIVersion services (CDIV) 12g34.9.7.0 General 12g34.9.7.1 Communication Forwarding Unconditional (CFU) 12g34.9.7.2 Communication Forwarding Busy (CFB) . 12g34.9.7.3 Communication Forwarding No Reply

22、 (CFNR) . 12g34.9.7.4 Communication Forwarding on Not Logged-in (CFNL) 12g34.9.7.5 Communication Deflection (CD) 12g34.9.8 Malicious Call IDentification (MCID) . 12g34.9.9 Explicit Communication Transfer (ECT) . 13g34.10 Interactions with other networks 13g34.10.1 Void 13g34.10.2 Void 13g34.10.3 Voi

23、d 13g34.11 Parameter values (timers) . 13g3Annex A (informative): Example signalling flows of Message Waiting Indication (MWI) service operation 14g3A.1 Scope of signalling flows . 14g3A.1.1 Introduction 14g3A.1.1.1 General 14g3A.1.1.2 Key required to interpret signalling flows 14g3A.1.2 Signalling

24、flows demonstrating how UE subscribes to message waiting indication event notification . 14g3A.1.2.1 Introduction. 14g3A.1.2.2 MWI Subscriber subscribing to the status of his message account, MWI AS is in the subscribers network . 15g3A.1.2.3 Void 20g3A.1.3 Signalling flows demonstrating how AS send

25、s message waiting indication notification to the UE which does not implement RFC 3842 . 20g3A.1.3.1 Introduction. 20g3A.1.3.2 Registration signalling for MWI subscriber 20g3A.1.3.3 AS notify subscriber when message account state change . 23g3A.1.4 Signalling flows demonstrating how a message is depo

26、sited into the subscribers message account . 24g3A.1.4.1 Introduction. 24g3A.1.4.2 Depositing a message into the subscribers message account . 24g3A.1.4.2.1 Successful message deposit into the subscribers message account 24g3Annex B (informative): Example of a filter criteria 29g3Annex C (informativ

27、e): Void . 30g3Annex D (informative): Change history . 31g3History 32g3ETSI ETSI TS 124 606 V13.0.0 (2016-01)53GPP TS 24.606 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subj

28、ect to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first

29、digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when

30、 editorial only changes have been incorporated in the document. ETSI ETSI TS 124 606 V13.0.0 (2016-01)63GPP TS 24.606 version 13.0.0 Release 131 Scope The present document specifies the stage three Protocol Description of the Message Waiting Indication (MWI) service, based on stage one and two of th

31、e ISDN MWI supplementary services. It provides the protocol details in the IP Multimedia (IM) Core Network (CN) subsystem based on the Session Initiation Protocol (SIP) and the Session Description Protocol (SDP). The present document is applicable to User Equipment (UE) and Application Servers (AS)

32、which are intended to support the MWI supplementary service. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number

33、, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document

34、in the same Release as the present document. 1 3GPP TS 22.173: “IP Multimedia Core Network Subsystem (IMS) Multimedia Telephony Service and supplementary services; Stage 1“. 2 3GPP TS 24.229: “Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Sess

35、ion Description Protocol (SDP); Stage 3“. 3 IETF RFC 3842: “A Message Summary and Message Waiting Indication Event Package for the Session Initiation Protocol (SIP)“. 4 IETF RFC 6665: “SIP-Specific Event Notification“. 5 IETF RFC 3458: “Message Context for Internet Mail“. 6 IETF RFC 3938: “Video-Mes

36、sage Message-Context“. 7 IETF RFC 2822: “Internet Message Format“. 8 IETF RFC 2156: “MIXER (Mime Internet X.400 Enhanced Relay): Mapping between X.400 and RFC 822/MIME“. 9 IETF RFC 3263: “Session Initiation Protocol (SIP): Locating SIP Servers“. 10 3GPP TS 22.101: “Service aspects; Service principle

37、s“. 11 IETF RFC 3261: “SIP: Session Initiation Protocol“. 12 3GPP TS 24.228 Release 5: “Signalling flows for the IP multimedia call control based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 13 3GPP TS 23.003: “Numbering, addressing and identification“. 14 V

38、oid 15 3GPP TS 22.228: “Service requirements for the Internet Protocol (IP) multimedia core network subsystem (IMS); Stage 1“. 16 IETF RFC 3428: “Session Initiation Protocol (SIP) Extension for Instant Messaging“. ETSI ETSI TS 124 606 V13.0.0 (2016-01)73GPP TS 24.606 version 13.0.0 Release 133 Defin

39、itions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 22.173 1, 3GPP TS 22.101 10, 3GPP TS 22.228 15, 3GPP TS 23.003 13 and the following apply: correspondent: person or entity that deposits messages in the subscribers message a

40、ccount NOTE: Correspondent and subscriber can be the same person or entity. Message Account (MA): resource that retains multimedia messages (voice, video, fax, etc.) deposited by correspondents for the subscriber subscriber: person or entity that receives status information about deposited messages

41、supplementary service: modifies or supplements a basic Telecommunication service 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AS Application Server CD Communication Deflection CDIV Communication DIVersionCFB Communication Forwarding Busy CFNL Communi

42、cation Forwarding on Not Logged-in CFNR Communication Forwarding No Reply CFU Communication Forwarding Unconditional CONF CONFerence calling CSCF Call Session Control Function ECT Explicit Communication Transfer HOLD Communication Hold I-CSCF Interrogating - CSCFIMS IP Multimedia Subsystem IP Intern

43、et Protocol ISDN Integrated Service Data Network MA Message Account MCID Malicious Call IDentification MIME Multipurpose Internet Mail Extensions MNUA MWI Notifier User Agent MSUA MWI Subscriber User Agent MWI Message Waiting Indication OIP Originating Identification Presentation OIR Originating Ide

44、ntification Restriction P-CSCF Proxy - CSCF PSI Public Service Identity PSTN Public Switch Telephone Network S-CSCF Serving - CSCF SDP Session Description Protocol SIP Session Initiation Protocol TIP Terminating Identification Presentation TIR Terminating Identification Restriction UA User Agent UE

45、User Equipment URI Universal Resource Identifier ETSI ETSI TS 124 606 V13.0.0 (2016-01)83GPP TS 24.606 version 13.0.0 Release 134 Message Waiting Indication (MWI) 4.1 Introduction The Message Waiting Indication (MWI) service enables the network, upon the request of a controlling user to indicate to

46、the receiving user, that there is at least one message waiting. 4.2 Description 4.2.1 General description The MWI service enables the AS to indicate to the subscriber, that there is at least one message waiting. The indication is delivered to the subscribers UE after successful subscription to the M

47、essage Waiting Indication service as described in the present document. Other modes of MWI service invocation are not applicable. NOTE: Having received this indication, the subscriber user can subsequently access the message account, to have the deposited message delivered. The means by which the su

48、bscriber accesses and manages the message account are outside the scope of the present document. 4.3 Functional entities 4.3.1 User Equipment (UE) The UE shall implement the MWI Subscriber User Agent role as described in subclause 4.4.1. 4.3.2 Application Server (AS) An AS shall implement the role o

49、f a MWI Notifier User Agent as described in subclause 4.4.2. An AS implementing the role of MWI Notifier User Agent shall implement the role of the AS acting as terminating UA as described in 3GPP TS 24.229 2, subclause 5.7.2. Additionally an AS may implement other roles for the receipt and storage of the messages for example Web Server, Mail Transfer and Delivery Agent, Short Message Service centre, etc. The definition of additional roles for an MWI AS is out of the scope for the current specification. 4.4 Roles 4.4.1 MWI

展开阅读全文
相关资源
猜你喜欢
  • BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf
  • BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf
  • BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf
  • BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf
  • BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf
  • BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf
  • BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf
  • BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf
  • BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1