1、 ETSI TS 124 616 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Malicious Communication Identification (MCID) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.616 version 1
2、4.0.0 Release 14) floppy3TECHNICAL SPECIFICATION ETSI ETSI TS 124 616 V14.0.0 (2017-04)13GPP TS 24.616 version 14.0.0 Release 14Reference RTS/TSGC-0124616ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Sire
3、t N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. Th
4、e content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portabl
5、e Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.e
6、tsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or
7、 mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunic
8、ations Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the
9、GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 124 616 V14.0.0 (2017-04)23GPP TS 24.616 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining
10、 to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat.
11、 Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the E
12、TSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, U
13、MTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall
14、“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used i
15、n direct citation. ETSI ETSI TS 124 616 V14.0.0 (2017-04)33GPP TS 24.616 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g3
16、4 Malicious Communication Identification (MCID) . 7g34.1 Introduction 7g34.2 Description . 8g34.2.1 General description . 8g34.3 Operational requirements . 8g34.3.1 Provision/withdrawal 8g34.3.2 Requirements on the originating network side 8g34.3.3 Void 8g34.3.4 Requirements on the terminating netwo
17、rk side . 8g34.4 Coding requirements 9g34.5 Signalling requirements 9g34.5.1 Activation/deactivation . 9g34.5.2 Invocation and operation 10g34.5.2.1 Actions at the originating UE 10g34.5.2.2 Void. 10g34.5.2.3 Void. 10g34.5.2.4 Void. 10g34.5.2.5 Actions at the AS of the terminating user . 10g34.5.2.5
18、.0 General 10g34.5.2.5.1 Subscriber has a permanent subscription . 10g34.5.2.6 Void. 12g34.5.2.7 Void. 12g34.5.2.8 Void. 12g34.5.2.9 Void. 12g34.5.2.10 Void. 12g34.5.2.11 Void. 12g34.5.2.12 Actions at the destination UE 12g34.5.2.12.0 Subscriber has a permanent subscription . 12g34.5.2.12.1 Subscrib
19、er has a temporary subscription . 12g34.6 Interaction with other services 12g34.6.1 Communication Hold (HOLD) . 12g34.6.2 Terminating Identification Presentation (TIP) 12g34.6.3 Terminating Identification Restriction (TIR) 12g34.6.4 Originating Identification Presentation (OIP) . 12g34.6.5 Originati
20、ng Identification Restriction (OIR) . 12g34.6.6 Conference (CONF) 13g34.6.7 Communication Diversion Services (CDIV) 13g34.6.7.1 Communication Forwarding Unconditional (CFU) 13g34.6.7.2 Communication Forwarding Busy (CFB) . 13g34.6.7.3 Communication Forwarding No Reply (CFNR) . 13g34.6.7.4 Communicat
21、ion Forwarding on Not Logged-In (CFNL) 13g34.6.7.5 Communication Deflection (CD) 13g34.6.8 Call Waiting (CW) 13g34.6.9 Anonymous Communication Rejection and Communication session Barring (ACR/CB) . 13g34.6.10 Explicit Communication Transfer (ECT) . 13g3ETSI ETSI TS 124 616 V14.0.0 (2017-04)43GPP TS
22、24.616 version 14.0.0 Release 144.7 Interactions with other networks 14g34.7.1 Void 14g34.7.2 Void 14g34.7.3 Void 14g34.8 Parameter values (timers) . 14g3Annex A (informative): Signalling Flows . 15g3A.1 MCID invocation 15g3A.2 Identity information not present in the initial request 16g3A.3 MCID inv
23、ocation during the call in temporary mode. 17g3Annex B (informative): Example of filter criteria . 21g3B.1 Terminating S-CSCF 21g3B.2 Originating S-CSCF . 21g3Annex C: (void) . 22g3Annex D (informative): Void . 23g3Annex E (informative): Change history . 24g3History 25g3ETSI ETSI TS 124 616 V14.0.0
24、(2017-04)53GPP TS 24.616 version 14.0.0 Release 14Foreword This Technical Specification (TS) was been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) and originally published as ETSI TS 183 016 12. It was transfer
25、red to the 3rdGeneration Partnership Project (3GPP) in December 2007. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
26、 identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all
27、changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 616 V14.0.0 (2017-04)63GPP TS 24.616 version 14.0.0 Release 141 Scope The present document specifies the
28、 stage three Protocol Description of the Malicious Call Communication Identification (MCID) service based on the stage one and two of ISDN Malicious Call Identification supplementary service. It provides the protocol details in the IP Multimedia (IM) Core Network (CN) subsystem based on the Session
29、Initiation Protocol (SIP) and the Session Description Protocol (SDP). The MCID service will store session related information independent of the service requested. The present document is applicable to User Equipment (UE) and Application Servers (AS) which are intended to support the MCID supplement
30、ary service. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific referenc
31、e, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3
32、GPP TS 22.173: “ IP Multimedia Core Network Subsystem (IMS) Multimedia Telephony Service and supplementary services, Stage 1 “. 2 3GPP TS 24.229: “Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 3 Vo
33、id. 4 ETSI TS 181 006: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN);Direct Communication Service in NGN; Service Description Endorsement of OMA-ERELD-PoC-V1 NGN DC stage 1“. 5 Void. 6 Void. 7 Void. 8 Void. 9 3GPP TS 29.228: “IP Multimedia (IM) Su
34、bsystem Cx and Dx Interfaces; Signalling flows and message contents“. 10 IETF RFC 3966: “The tel URI for Telephone Numbers“. 11 IETF RFC 3986: “Uniform Resource Identifier (URI): Generic Syntax“. 12 ETSI TS 183 016 V2.5.0: “Telecommunications and Internet converged Services and Protocols for Advance
35、d Networking (TISPAN); PSTN/ISDN simulation services; Malicious Communication Identification (MCID); Protocol specification“. 13 ETSI TR 180 000: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Terminology“. ETSI ETSI TS 124 616 V14.0.0 (2017-0
36、4)73GPP TS 24.616 version 14.0.0 Release 143 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 22.173 1, ETSI TS 181 006 4, ETSI TR 180 000 13 and the following apply: communication information: information collected an
37、d registered by the MCID service identity information: includes all the information (IETF RFC 3966 10 and IETF RFC 3986 11) identifying a user, including trusted (network generated) and/or untrusted (user generated) identities trusted identity: network generated user address information untrusted id
38、entity: user generated user address information 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACR Anonymous Communication Rejection AS Application Server CB Communication session Barring CD Communication Deflection CDIV Communication DIVersion Service
39、s CFB Communication Forwarding Busy CFNL Communication Forwarding on Not Logged-in CFNR Communication Forwarding No Reply CFU Communication Forwarding Unconditional CONF Conference CW Call WaitingECT Explicit Communication Transfer HOLD communication Hold IM IP MultimediaIMS IP Multimedia Subsystem
40、IP Internet Protocol ISDN Integrated Service Digital Network MCID Malicious Call Identification MGCF Media Gateway Control Function OIP Originating Identification Presentation OIR Originating Identification Restriction PSTN Public Switched Telephone Network S-CSCF Service - Call Session Control Func
41、tion SDP Session Description Protocol SIP Session Initiation Protocol TIP Terminating Identification Presentation TIR Terminating Identification Restriction UE User Equipment URI Uniform Resource Identifier 4 Malicious Communication Identification (MCID) 4.1 Introduction The MCID service will store
42、session related information of incoming communications independent of the service requested. The following communication information shall be registered: ETSI ETSI TS 124 616 V14.0.0 (2017-04)83GPP TS 24.616 version 14.0.0 Release 14- Destination Party Identity Information; - originating Party Ident
43、ity Information; and - local time and date of the invocation in the network serving the called user. The communication information shall not be available to the terminal equipment under the control of the called user nor the originating user. The communication information shall be stored at a locati
44、on(s) under the control of the network operator. In order for the MCID service to operate when two networks are involved both networks need to be within the same trust domain for identity information transfer. A network subscription option can be provided which allows automatic invocation of MCID se
45、rvice on communications to the served user which are not answered. NOTE: The purpose of this option is to allow for registration of communications that ring for a short time only. A user subscription option can be provided where the MCID service can either be invoked during the active phase of the c
46、ommunication, or for a limited period after the communication has ceased. 4.2 Description 4.2.1 General description The Malicious Communication Identification (MCID) service allows the service provider to trace the identity information of the source of an incoming communication on request of the des
47、tination user. 4.3 Operational requirements 4.3.1 Provision/withdrawal This service shall be provided and withdrawn after pre-arrangement with the service provider, in accordance with national legal requirements. This service has two modes: permanent mode and temporary mode. In permanent mode the MC
48、ID service is invoked for all incoming communications, and in temporary mode the MCID service is invoked only for the incoming communications declared by the served user. As a network option, the MCID service can be offered with several subscription options. A network providing the MCID service shal
49、l support permanent mode at a minimum. Subscription options are summarized in table 4.3.1.1. Table 4.3.1.1: Subscription options for MCID services Subscription options Value Mode Permanent ModeTemporary Mode 4.3.2 Requirements on the originating network side No specific requirements are needed in the originating network. 4.3.3 Void Void. 4.3.4 Requirements on the terminating network side No specific requirements are needed in the terminating network. ETSI ETSI TS 124 616 V14.0.0 (2017-04)93GPP TS 24.616 version 14.0.0 Release 14NO
