1、 ETSI TS 125 101 V14.0.0 (2017-05) Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 101 V14.0.0 (2017-05)13GPP TS 25.101 version 14.0.0 Release 14Reference
2、 RTS/TSGR-0425101ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present
3、 document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI.
4、In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the
5、document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: http
6、s:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be
7、 modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the ben
8、efit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 10
9、1 V14.0.0 (2017-05)23GPP TS 25.101 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members,
10、 and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to
11、the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. F
12、oreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the
13、corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and
14、“cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 101 V14.0.0 (2017-05)33GPP TS 25.101 version 14.0.0 R
15、elease 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 14g31 Scope 15g32 References 15g33 Definitions, symbols and abbreviations . 15g33.1 Definitions 15g33.2 Abbreviations . 17g34 General . 19g34.1 Relationship between Minimum Requirements and Test Req
16、uirements 19g34.2 Power Classes . 19g34.3 Control and monitoring functions 19g34.3.1 Minimum requirement 20g34.4 RF requirements in later releases . 20g35 Frequency bands and channel arrangement 20g35.1 General . 20g35.2 Frequency bands . 20g35.3 TX-RX frequency separation . 23g35.4 Channel arrangem
17、ent 24g35.4.1 Channel spacing 24g35.4.2 Channel raster . 24g35.4.3 Channel number 24g35.4.4 UARFCN 27g36 Transmitter characteristics . 28g36.1 General . 28g36.2 Transmit power 28g36.2.1 UE maximum output power 28g36.2.1A UE maximum output power for UL OLTD 30g36.2.1B UE maximum output power for UL C
18、LTD 31g36.2.1C UE maximum output power for UL MIMO 32g36.2.1D UE maximum output power for DB-DC-HSUPA 33g36.2.2 UE maximum output,power with HS-DPCCH and E-DCH . 34g36.2.2A UE maximum output,power for DC-HSUPA . 34g36.2.2B UE maximum output power with HS-DPCCH and E-DCH for UL OLTD 35g36.2.2C UE max
19、imum output power with HS-DPCCH and E-DCH for UL CLTD 36g36.2.2D UE maximum output power with HS-DPCCH and E-DCH for UL MIMO . 36g36.2.2E UE maximum output power for the band with HS-DPCCH and E-DCH for DB-DC-HSUPA 37g36.2.3 UE Relative code domain power accuracy . 37g36.2.3A UE Relative code domain
20、 power accuracy for DC-HSUPA . 38g36.2.3B UE Relative code domain power accuracy for UL OLTD 39g36.2.3C UE Relative code domain power accuracy for UL CLTD 39g36.2.3D UE Relative code domain power accuracy for UL MIMO . 39g36.2.3E UE Relative code domain power accuracy for DB-DC-HSUPA 39g36.3 Frequen
21、cy Error 39g36.3A Frequency Error for DC-HSUPA . 39g36.3B Frequency error for UL OLTD . 39g36.3C Frequency error for UL CLTD . 40g36.3D Frequency error for UL MIMO 40g36.3E Frequency error for DB-DC-HSUPA . 40g36.4 Output power dynamics 40g36.4.1 Open loop power control 40g3ETSI ETSI TS 125 101 V14.
22、0.0 (2017-05)43GPP TS 25.101 version 14.0.0 Release 146.4.1.1 Minimum requirement 40g36.4.1.1A Additional requirement for DC-HSUPA . 40g36.4.1.1B Additional requirement for DB-DC-HSUPA 40g36.4.2 Inner loop power control in the uplink 41g36.4.2.1 Power control steps . 41g36.4.2.1.1 Minimum requiremen
23、t . 41g36.4.2.1.1A Additional requirement for DC-HSUPA . 42g36.4.2.1.1B Additional requirement for UL OLTD 43g36.4.2.1.1C Additional requirement for UL CLTD 43g36.4.2.1.1D Additional requirement for UL MIMO 43g36.4.2.1.1E Additional requirement for DB-DC-HSUPA 43g36.4.3 Minimum output power 43g36.4.
24、3.1 Minimum requirement 43g36.4.3.1A Additional requirement for DC-HSUPA . 43g36.4.3.1B Additional requirement for UL OLTD 43g36.4.3.1C Additional requirement for UL CLTD 43g36.4.3.1D Additional requirement for UL MIMO . 43g36.4.3.1E Additional requirement for DB-DC-HSUPA 44g36.4.4 Out-of-synchroniz
25、ation handling of output power 44g36.4.4.1 Minimum requirement 44g36.4.4.1A Additional requirement for UL OLTD 44g36.4.4.1B Additional requirement for UL CLTD 44g36.4.4.1C Additional requirement for UL MIMO . 45g36.4.4.1D Additional requirement for DB-DC-HSUPA 45g36.4.4.2 Test case 45g36.4A Output p
26、attern dynamics 47g36.4A.1 Out-of-quality handling of TPI applicability 47g36.4A.1.1 Minimum requirement 47g36.4A.1.2 Test case 47g36.5 Transmit ON/OFF power . 49g36.5.1 Transmit OFF power . 49g36.5.1.1 Minimum requirement 49g36.5.1.1A Additional requirement for DC-HSUPA . 49g36.5.1.1B Additional re
27、quirement for UL OLTD 50g36.5.1.1C Additional requirement for UL CLTD 50g36.5.1.1D Additional requirement for UL MIMO . 50g36.5.1.1E Additional requirement for DB-DC-HSUPA 50g36.5.2 Transmit ON/OFF Time mask 50g36.5.2.1 Minimum requirement 50g36.5.2.1A Additional requirement for UL OLTD 53g36.5.2.1B
28、 Additional requirement for UL CLTD 53g36.5.2.1C Additional requirement for UL MIMO . 53g36.5.2.1D Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 53g36.5.3 Change of TFC . 53g36.5.3.1 Minimum requirement 54g36.5.3.1A Additional requirement for UL OLTD 55g36.5.3.1B Addition
29、al requirement for UL CLTD 55g36.5.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 56g36.5.4 Power setting in uplink compressed mode 56g36.5.4.1 Minimum requirement 56g36.5.4.1A Additional requirement for UL OLTD 57g36.5.4.1B Additional requirement for UL CLTD 57g36.5.
30、4.1C Additional requirement for DB-DC-HSUPA 58g36.5.5 HS-DPCCH. 58g36.5.5.1 Minimum requirement 58g36.5.5.1A Additional requirement for UL OLTD 60g36.5.5.1B Additional requirement for UL CLTD 60g36.5.5.1C Additional requirement for UL MIMO . 60g36.5.5.1D Additional requirement for DB-DC-HSUPA 60g36.
31、6 Output RF spectrum emissions . 60g36.6.1 Occupied bandwidth . 60g36.6.1A Occupied bandwidth for DC-HSUPA . 61g3ETSI ETSI TS 125 101 V14.0.0 (2017-05)53GPP TS 25.101 version 14.0.0 Release 146.6.1B Occupied bandwidth for UL OLTD 61g36.6.1C Occupied bandwidth for UL CLTD 61g36.6.1D Occupied bandwidt
32、h for UL MIMO . 61g36.6.1E Occupied bandwidth for DB-DC-HSUPA 61g36.6.2 Out of band emission 61g36.6.2.1 Spectrum emission mask . 61g36.6.2.1.1 Minimum requirement. 62g36.6.2.1A Additional Spectrum emission mask for DC-HSUPA 63g36.6.2.1A.1 Minimum requirement . 63g36.6.2.1A.2 Additional requirement
33、for band II, IV, V, X, XXV and XXVI 63g36.6.2.1B Additional requirement for UL OLTD 64g36.6.2.1C Additional requirement for UL CLTD 64g36.6.2.1D Additional requirement for UL MIMO . 64g36.6.2.1E Additional requirement for DB-DC-HSUPA 64g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 64g36.6.
34、2.2.1 Minimum requirement . 64g36.6.2.2.1A Additional requirement for DC-HSUPA . 65g36.6.2.2.1B Additional requirement for UL OLTD 65g36.6.2.2.1C Additional requirement for UL CLTD 65g36.6.2.2.1D Additional requirement for UL MIMO 65g36.6.2.2.1E Additional requirement for DB-DC-HSUPA 65g36.6.3 Spuri
35、ous emissions . 65g36.6.3.1 Minimum requirement 65g36.6.3.1.1 Additional requirement 74g36.6.3.1A Additional requirement for DC-HSUPA . 74g36.6.3.1A.1 Additional requirement for DC-HSUPA . 80g36.6.3.1B Additional requirement for UL OLTD 81g36.6.3.1C Additional requirement for UL CLTD 81g36.6.3.1D Ad
36、ditional requirement for UL MIMO . 81g36.6.3.1E Additional requirement for DB-DC-HSUPA 81g36.7 Transmit intermodulation . 83g36.7.1 Minimum requirement 83g36.7.1A Additional requirement for DC-HSUPA. 83g36.7.1B Additional requirement for UL OLTD 83g36.7.1C Additional requirement for UL CLTD 83g36.7.
37、1D Additional requirement for UL MIMO . 83g36.7.1E Additional requirement for DB-DC-HSUPA 83g36.8 Transmit modulation 84g36.8.1 Transmit pulse shape filter 84g36.8.1A Additional requirement for UL OLTD 84g36.8.1B Additional requirement for UL CLTD 84g36.8.1C Additional requirement for UL MIMO . 84g3
38、6.8.1D Additional requirement for DB-DC-HSUPA 84g36.8.2 Error Vector Magnitude 84g36.8.2.1 Minimum requirement 85g36.8.2.1A Additional requirement for DC-HSUPA . 85g36.8.2.1B Additional requirement for UL OLTD 86g36.8.2.1C Additional requirement for UL CLTD 86g36.8.2.1D Additional requirement for UL
39、 MIMO . 86g36.8.2.1E Additional requirement for DB-DC-HSUPA 87g36.8.3 Peak code domain error 87g36.8.3.1 Minimum requirement 87g36.8.3.1A Additional requirement for UL OLTD 87g36.8.3.1B Additional requirement for UL CLTD 87g36.8.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously wi
40、th CS . 87g36.8.3a Relative code domain error . 88g36.8.3a.1 Relative Code Domain Error . 88g36.8.3a.1.1 Minimum requirement. 88g36.8.3a.1.1a Additional requirement for DC-HSUPA . 89g36.8.3a.1.1b Additional requirement for UL OLTD 89g36.8.3a.1.1c Additional requirement for UL CLTD 89g36.8.3a.1.1d Ad
41、ditional requirement for UL MIMO 89g3ETSI ETSI TS 125 101 V14.0.0 (2017-05)63GPP TS 25.101 version 14.0.0 Release 146.8.3a.1.1e Additional requirement for DB-DC-HSUPA 89g36.8.3b In-band emission for DC-HSUPA 89g36.8.3b.1 Minimum requirement for DC-HSUPA 90g36.8.4 Phase discontinuity for uplink DPCH
42、. 90g36.8.4.1 Minimum requirement 90g36.8.4.1A Additional requirement for UL OLTD 90g36.8.4.1B Additional requirement for UL CLTD 91g36.8.4.1C Additional requirement for DB-DC-HSUPA 91g36.8.5 Phase discontinuity for HS-DPCCH . 91g36.8.5.1 Minimum requirement 91g36.8.5.1A Additional requirement for U
43、L OLTD 91g36.8.5.1B Additional requirement for UL CLTD 91g36.8.6 Phase discontinuity for E-DCH 92g36.8.6.1 Minimum requirement 92g36.8.6.1A Additional requirement for UL OLTD 93g36.8.6.1B Additional requirement for UL CLTD 93g36.8.6.1C Additional requirement for DB-DC-HSUPA 93g36.8.7 Time alignment
44、error for DC-HSUPA 93g36.8.7.1 Minimum requirement 93g36.8.7A Time alignment error for UL OLTD . 93g36.8.7A.1 Minimum requirement 93g36.8.7B Time alignment error for UL CLTD . 93g36.8.7B.1 Minimum requirement 93g36.8.7C Time alignment error for UL MIMO 94g36.8.7C.1 Minimum requirement 94g36.8.7D Tim
45、e alignment error for DB-DC-HSUPA . 94g36.8.7D.1 Minimum requirement 94g37 Receiver characteristics 94g37.1 General . 94g37.2 Diversity characteristics . 95g37.3 Reference sensitivity level 95g37.3.1 Minimum requirement 96g37.3.2 Additional requirement for DC-HSDPA. 97g37.3.3 Additional requirement
46、for DB-DC-HSDPA 99g37.3.4 Additional requirement for single band 4C-HSDPA 100g37.3.5 Additional requirement for dual band 4C-HSDPA . 101g37.3.6 Additional requirement for single band 8C-HSDPA 101g37.3.7 Additional requirement for single band NC-4C-HSDPA . 102g37.4 Maximum input level . 103g37.4.1 Mi
47、nimum requirement for DPCH reception . 103g37.4.2 Minimum requirement for HS-PDSCH reception . 103g37.4.2.1 Minimum requirement for 16QAM . 103g37.4.2.2 Minimum requirement for 64QAM . 104g37.4.3 Additional requirement for DC-HSDPA and DB-DC-HSDPA 105g37.4.3.1 Additional requirement for 16QAM 105g37
48、.4.3.2 Additional requirement for 64QAM 105g37.4.4 Additional requirement for single band/dual band 4C-HSDPA or single band 8C-HSDPA and single band NC-4C-HSDPA 106g37.4.4.1 Additional requirement for 16QAM 106g37.4.4.2 Additional requirement for 64QAM 107g37.5 Adjacent Channel Selectivity (ACS) 107
49、g37.5.1 Minimum requirement 108g37.5.2 Additional requirement for DC-HSDPA and DB-DC-HSDPA 108g37.5.3 Additional requirement for single band/dual band 4C-HSDPA 109g37.5.4 Additional requirement for single band 8C-HSDPA 112g37.5.5 Additional requirement for single band NC-4C-HSDPA . 113g37.6 Blocking characteristics . 114g37.6.1 Minimum requirement (In-band blocking) . 115g37.6.1A Additional requirement for DC-HSDPA and DB-DC-HSDPA (In-band blocking) . 116g37.6.1B Additional requirement for DC-HSUPA (In-band blocking) 119g37.6.1C Additional requirement for single band 4C-HSDPA
