1、 ETSI TS 1Universal Mobile TelBase Station (B(3GPP TS 25.1TECHNICAL SPECIFICATION125 142 V11.5.0 (2016elecommunications System (BS) conformance testing (TD.142 version 11.5.0 Release 1116-01) (UMTS); TDD) 11) ETSI ETSI TS 125 142 V11.5.0 (2016-01)13GPP TS 25.142 version 11.5.0 Release 11Reference RT
2、S/TSGR-0425142vb50 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present do
3、cument can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In
4、case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the doc
5、ument may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.ets
6、i.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified wit
7、hout the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its M
8、embers. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 142 V11.5.0 (2016-01)23GPP TS 25.142 version 11.5.0 Release 11Intellect
9、ual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (
10、IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has be
11、en carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3
12、rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMT
13、S, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI
14、 Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 142 V11.5.0 (2016-01)33GPP TS 25.142 version 11.5.0 Release 11Contents Intellectual Property Rights 2g3Foreword . 2g3Modal
15、 verbs terminology 2g3Foreword . 17g31 Scope 18g32 References 18g33 Definitions, symbols, and abbreviations 19g33.1 Definitions 19g33.2 Symbols 20g33.3 Abbreviations . 20g34 Frequency bands and channel arrangement 22g34.1 General . 22g34.2 Frequency bands . 22g34.3 TX-RX frequency separation . 23g34
16、.3.1 3,84 Mcps TDD option . 23g34.3.2 1,28 Mcps TDD option . 23g34.3.3 7,68 Mcps TDD option . 23g34.4 Channel arrangement 23g34.4.1 Channel spacing 23g34.4.1.1 3,84 Mcps TDD option . 23g34.4.1.2 1,28 Mcps TDD option . 23g34.4.1.3 7,68 Mcps TDD option . 23g34.4.2 Channel raster . 23g34.4.2.1 3,84 Mcp
17、s TDD Option . 23g34.4.3 Channel number 23g35 General test conditions and declarations 24g35.1 Base station classes 24g35.1.1 Applicability of requirements and BS class definition . 24g35.1.2 Manufacturer“s declaration of supported RF configurations 24g35.2 Output power 25g35.3 Specified frequency r
18、ange and supported channel bandwidth 25g35.3.1 RF bandwidth position for multi-carrier testing 26g35.4 Relationship between RF generation and chip clock 26g35.5 Spectrum emission mask 26g35.6 Adjacent Channel Leakage power Ratio (ACLR) 26g35.7 Tx spurious emissions 27g35.7.1 Category of spurious emi
19、ssions limit 27g35.7.2 Co-existence with GSM 27g35.7.3 Co-existence with DCS 1800 27g35.7.4 Co-existence with UTRA FDD . 27g35.7.5 Co-existence with unsynchronised UTRA TDD and/or E-UTRA TDD . 28g35.8 Blocking characteristics . 28g35.9 Test environments 28g35.9.1 Normal test environment 28g35.9.2 Ex
20、treme test environment . 29g35.9.2.1 Extreme temperature . 29g35.9.3 Vibration . 29g35.9.4 Power supply 29g35.10 Acceptable uncertainty of Test System . 30g35.10.1 Measurement of test environments . 30g35.10.2 Measurement of transmitter 31g35.10.3 Measurement of receiver 35g3ETSI ETSI TS 125 142 V11
21、.5.0 (2016-01)43GPP TS 25.142 version 11.5.0 Release 115.10.4 Measurement of performance requirements . 36g35.11 Test Tolerances (informative) . 36g35.11.1 Transmitter 37g35.11.2 Receiver 39g35.11.3 Performance requirements 39g35.12 Interpretation of measurement results 39g35.13 Selection of configu
22、rations for testing 39g35.14 BS Configurations 40g35.14.1 Receiver diversity . 40g35.14.2 Duplexers 40g35.14.3 Power supply options 40g35.14.4 Ancillary RF amplifiers 41g35.14.5 BS using antenna arrays 41g35.14.5.1 Receiver tests 41g35.14.5.2 Transmitter tests 41g35.14.6 MIMO transmission 42g35.15 O
23、verview of the conformance test requirements 42g35.16 Format and interpretation of tests . 44g35.17 Regional requirements 44g35.18 Definition of Additive White Gaussian Noise (AWGN) Interferer 45g35.19 Applicability of requirements . 45g35.20 Test configurations for multi-carrier operation 46g35.20.
24、1 UTTC1: Multi-carrier operation test configuration 46g35.20.1.1 UTTC1 generation 46g35.20.1.1 UTTC1 power allocation 46g35.20.2 UTTC2: Multi-band test configuration for full carrier allocation . 46g35.20.2.1 UTTC2 generation 46g35.20.2.2 UTTC2 power allocation . 47g35.21 Applicability of test confi
25、gurations 47g35.22 Requirements for BS capable of multi-band operation 49g36 Transmitter characteristics . 50g36.1 General . 50g3IMB Test Models 50g36.1.1.1 IMB Test Model 1 - TM 1 . 50g36.1.1.2 IMB Test Model 2 - TM 2 . 51g36.2 Maximum output power . 51g36.2.1 Definition and applicability 51g36.2.2
26、 Minimum Requirements . 51g36.2.3 Test purpose 51g36.2.4 Method of test . 52g36.2.4.1 Initial conditions . 52g36.2.4.1.0 General test conditions 52g36.2.4.1.1 3,84 Mcps TDD option 52g36.2.4.1.2 1,28 Mcps TDD option 52g36.2.4.1.3 7,68 Mcps TDD option 53g36.2.4.2 Procedure 53g36.2.4.2.1 3,84 Mcps TDD
27、option 53g36.2.4.2.2 1,28 Mcps TDD option 53g36.2.4.2.3 7,68 Mcps TDD option 53g36.2.5 Test Requirements 54g36.3 Frequency stability . 54g36.3.1 Definition and applicability 54g36.3.2 Minimum Requirements . 54g36.3.3 Test purpose 54g36.3.4 Method of test . 54g36.3.4.1 Initial conditions . 54g36.3.4.
28、1.0 General test conditions 54g36.3.4.1.1 3,84 Mcps TDD option 55g36.3.4.1.2 1,28 Mcps TDD option 55g36.3.4.1.3 7,68 Mcps TDD option 55g36.3.4.2 Procedure 56g3ETSI ETSI TS 125 142 V11.5.0 (2016-01)53GPP TS 25.142 version 11.5.0 Release 116.3.5 Test Requirements 56g36.4 Output power dynamics 56g36.4.
29、1 Inner loop power control . 56g36.4.2 Power control steps . 57g36.4.2.1 Definition and applicability . 57g36.4.2.2 Minimum Requirements 57g36.4.2.3 Test purpose 57g36.4.2.4 Method of test . 57g36.4.2.4.1 Initial conditions 57g36.4.2.4.1.0 General test conditions . 57g36.4.2.4.1.1 3,84 Mcps TDD opti
30、on 57g36.4.2.4.1.2 1,28 Mcps TDD option 58g36.4.2.4.1.3 7,68 Mcps TDD option 58g36.4.2.4.2 Procedure . 59g36.4.2.4.2.1 3,84 Mcps TDD option 59g36.4.2.4.2.2 1,28 Mcps TDD option 59g36.4.2.4.2.3 7,68 Mcps TDD option 60g36.4.2.5 Test Requirements . 60g36.4.2.5.1 3,84 Mcps TDD option 60g36.4.2.5.2 1,28
31、Mcps TDD option 60g36.4.2.5.3 7,68 Mcps TDD option 61g36.4.3 Power control dynamic range . 61g36.4.3.1 Definition and applicability . 61g36.4.3.2 Minimum Requirements 61g36.4.3.3 Test purpose 61g36.4.3.4 Method of test . 61g36.4.3.4.1 Initial conditions 61g36.4.3.4.1.0 General test conditions . 61g3
32、6.4.3.4.1.1 3,84 Mcps TDD option 61g36.4.3.4.1.2 1,28 Mcps TDD option 62g36.4.3.4.1.3 7,68 Mcps TDD option 62g36.4.3.4.2 Procedure . 63g36.4.3.4.2.1 3,84 Mcps TDD option 63g36.4.3.4.2.2 1,28 Mcps TDD option 63g36.4.3.4.2.3 7,68 Mcps TDD option 64g36.4.3.5 Test Requirements . 64g36.4.4 Minimum output
33、 power 64g36.4.4.1 Definition and applicability . 64g36.4.4.2 Minimum Requirements 64g36.4.4.3 Test purpose 64g36.4.4.4 Method of test . 65g36.4.4.4.1 Initial conditions 65g36.4.4.4.1.0 General test conditions . 65g36.4.4.4.1.1 3,84 Mcps TDD option 65g36.4.4.4.1.2 1,28 Mcps TDD option 65g36.4.4.4.1.
34、3 7,68 Mcps TDD option 66g36.4.4.4.2 Procedure . 66g36.4.4.4.2.1 3,84 Mcps TDD option 66g36.4.4.4.2.2 1,28 Mcps TDD option 66g36.4.4.4.2.3 7,68 Mcps TDD option 67g36.4.4.5 Test Requirements . 67g36.4.5 Primary CCPCH power 67g36.4.5.1 Definition and applicability . 67g36.4.5.2 Minimum Requirements 67
35、g36.4.5.3 Test purpose 68g36.4.5.4 Method of test . 68g36.4.5.4.1 Initial conditions 68g36.4.5.4.1.0 General test conditions . 68g36.4.5.4.1.1 3,84 Mcps TDD option 68g36.4.5.4.1.2 1,28 Mcps TDD option 68g36.4.5.4.1.3 7,68 Mcps TDD option 69g36.4.5.4.2 Procedure . 69g3ETSI ETSI TS 125 142 V11.5.0 (20
36、16-01)63GPP TS 25.142 version 11.5.0 Release 116.4.5.4.2.1 3,84 Mcps TDD option 69g36.4.5.4.2.2 1,28 Mcps TDD option 69g36.4.5.4.2.3 7,68 Mcps TDD option 70g36.4.5.5 Test Requirements . 70g36.4.6 Differential accuracy of Primary CCPCH power 70g36.4.6.1 Definition and applicability . 70g36.4.6.2 Mini
37、mum Requirements 70g36.4.6.3 Test purpose 70g36.4.6.4 Method of test . 70g36.4.6.4.1 Initial conditions 70g36.4.6.4.1.0 General test conditions . 70g36.4.6.4.1.1 3,84 Mcps TDD option 71g36.4.6.4.1.2 1,28 Mcps TDD option 71g36.4.6.4.1.3 7,68 Mcps TDD option 71g36.4.6.4.2 Procedure . 72g36.4.6.4.2.1 3
38、,84 Mcps TDD option 72g36.4.6.4.2.2 1,28 Mcps TDD option 72g36.4.6.4.2.3 7,68 Mcps TDD option 72g36.4.6.5 Test Requirements . 72g36.5 Transmit ON/OFF power . 73g36.5.1 Transmit OFF power . 73g36.5.1.1 Definition and applicability . 73g36.5.1.2 Minimum Requirements 73g36.5.1.2.1 3,84 Mcps TDD option
39、73g36.5.1.2.2 1,28 Mcps TDD option 73g36.5.1.2.3 7,68 Mcps TDD option 73g36.5.1.3 Test purpose 73g36.5.1.4 Method of test . 73g36.5.1.4.1 Initial conditions 73g36.5.1.4.2 Procedure . 73g36.5.1.5 Test Requirements . 73g36.5.2 Transmit ON/OFF time mask . 73g36.5.2.1 Definition and applicability . 73g3
40、6.5.2.2 Minimum Requirements 74g36.5.2.2.1 3,84 Mcps TDD option 74g36.5.2.2.2 1,28 Mcps TDD option 74g36.5.2.2.3 7,68 Mcps TDD option 74g36.5.2.3 Test purpose 75g36.5.2.4 Method of test . 75g36.5.2.4.1 Initial conditions 75g36.5.2.4.1.0 General test conditions . 75g36.5.2.4.1.1 3,84 Mcps TDD option
41、75g36.5.2.4.1.2 1,28 Mcps TDD option 76g36.5.2.4.1.3 7,68 Mcps TDD option 76g36.5.2.4.2 Procedure . 76g36.5.2.4.2.1 3,84 Mcps TDD option 76g36.5.2.4.2.2 1,28 Mcps TDD option 76g36.5.2.4.2.3 7,68 Mcps TDD option 77g36.5.2.5 Test Requirements . 77g36.5.2.5.1 3,84 Mcps TDD option 77g36.5.2.5.2 1,28 Mcp
42、s TDD option 77g36.5.2.5.3 7,68 Mcps TDD option 77g36.6 Output RF spectrum emissions . 77g36.6.1 Occupied bandwidth . 77g36.6.1.1 Definition and applicability . 77g36.6.1.2 Minimum Requirements 77g36.6.1.2.1 3,84 Mcps TDD option 77g36.6.1.2.2 1,28 Mcps TDD option 77g36.6.1.2.3 7,68 Mcps TDD option 7
43、7g36.6.1.3 Test purpose 78g36.6.1.4 Method of test . 78g36.6.1.4.1 Initial conditions 78g3ETSI ETSI TS 125 142 V11.5.0 (2016-01)73GPP TS 25.142 version 11.5.0 Release 116.6.1.4.1.0 General test conditions . 78g36.6.1.4.1.1 3,84 Mcps TDD option 78g36.6.1.4.1.2 1,28 Mcps TDD option 78g36.6.1.4.1.3 7,6
44、8 Mcps TDD option 79g36.6.1.4.2 Procedure . 79g36.6.1.4.2.1 3,84 Mcps TDD option 79g36.6.1.4.2.2 1,28 Mcps TDD option 79g36.6.1.4.2.3 7,68 Mcps TDD option 80g36.6.1.5 Test Requirements . 80g36.6.1.5.1 3,84 Mcps TDD option 80g36.6.1.5.2 1,28 Mcps TDD option 80g36.6.1.5.3 7,68 Mcps TDD option 80g36.6.
45、2 Out of band emission 80g36.6.2.1 Spectrum emission mask . 81g36.6.2.1.1 Definition and applicability . 81g36.6.2.1.1.1 3,84 Mcps TDD option 81g36.6.2.1.1.2 1,28 Mcps TDD option 81g36.6.2.1.1.3 7,68 Mcps TDD option 81g36.6.2.1.2 Minimum Requirements 81g36.6.2.1.2.1 3,84 Mcps TDD option 81g36.6.2.1.
46、2.2 1,28 Mcps TDD option 82g36.6.2.1.2.3 7,68 Mcps TDD option 83g36.6.2.1.3 Test purpose 84g36.6.2.1.4 Method of test 85g36.6.2.1.4.1 Initial conditions 85g36.6.2.1.4.1.0 General test conditions . 85g36.6.2.1.4.1.1 3,84 Mcps TDD option - General test set up 85g36.6.2.1.4.1.2 1,28 Mcps TDD option - G
47、eneral test set up 85g36.6.2.1.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS 86g36.6.2.1.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS 86g36.6.2.1.4.1.5 7,68 Mcps TDD option - General test set up 87g36.6.2.1.4.1.6 7,68 Mcps TDD option - Special test se
48、t up for 16QAM capable BS 87g36.6.2.1.4.2 Procedure . 88g36.6.2.1.4.2.1 3,84 Mcps TDD option . 88g36.6.2.1.4.2.2 1,28 Mcps TDD option . 88g36.6.2.1.4.2.3 1,28 Mcps TDD option - 16QAM capable BS . 88g36.6.2.1.4.2.4 3,84 Mcps TDD option - 16QAM capable BS . 88g36.6.2.1.4.2.5 7,68 Mcps TDD option . 88g
49、36.6.2.1.4.2.6 7,68 Mcps TDD option - 16QAM capable BS . 88g36.6.2.1.5 Test Requirements . 89g36.6.2.1.5.1 3,84 Mcps TDD option 89g36.6.2.1.5.2 1,28 Mcps TDD option 90g36.6.2.1.5.3 1,28 Mcps TDD option - 16QAM capable BS . 91g36.6.2.1.5.4 3,84 Mcps TDD option - 16QAM capable BS . 91g36.6.2.1.5.5 7,68 Mcps TDD option 91g36.6.2.1.5.6 7,68 Mcps TDD option - 16QAM capable BS . 92g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 92g36.6.2.2.1 Definition and applicability . 92g36.6.2.2.2 Minimum Requirements 92g36.6.2.2.2.1 Minimum requirement . 92g36.6.2.2.2.1.1 3,84 Mcps T
