1、 ETSI TS 125 143 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); UTRA repeater conformance testing (3GPP TS 25.143 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 143 V14.0.0 (2017-04)13GPP TS 25.143 version 14.0.0 Release 14Reference RTS/TSGR-0425143ve00 Key
2、words UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be download
3、ed from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing o
4、r perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject t
5、o revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People
6、/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wri
7、tten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPP
8、TM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 143 V14.0.0 (2017-04)23GPP
9、TS 25.143 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI
10、 SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no i
11、nvestigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Sp
12、ecification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI delive
13、rables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interp
14、reted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 143 V14.0.0 (2017-04)33GPP TS 25.143 version 14.0.0 Release 14Contents Intelle
15、ctual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 (void) 9g33.3 Abbreviations . 9g34 Frequency bands and channel arrangement 10g34.1 Frequency bands . 10g34.2 TX RX frequency
16、 separation . 10g34.3 Channel arrangement 11g34.3.1 Channel spacing 11g34.3.2 Channel raster . 11g34.3.3 Channel number 11g35 General test conditions and declarations 13g35.1 Acceptable uncertainty of Test System 14g35.1.1 Measurements of test environments 14g35.1.2 Measurements of Repeater 15g35.2
17、Repeater test tolerances (informative) 17g35.3 Interpretation of measurement results 18g35.4 Test Environment . 19g35.4.1 Normal test environment 19g35.4.2 Extreme test environment . 19g35.4.2.1 Extreme temperature . 19g35.4.3 Vibration . 20g35.4.4 Power supply 20g35.5 Selection of configurations fo
18、r testing 20g35.6 Regional requirements 21g35.7 Test Models 22g35.8 Format and interpretation of tests . 22g35.9 Repeater configurations 23g35.9.1 Power supply options 23g35.9.2 Combining of Repeaters . 23g36 Output power 23g36.1 Maximum output power . 23g36.1.1 Definition and applicability 23g36.1.
19、2 Minimum Requirements . 23g36.1.3 Test purpose 24g36.1.4 Method of test . 24g36.1.4.1 Initial conditions . 24g36.1.4.2 Procedure 24g36.1.5 Test Requirements 24g37 Frequency stability . 25g37.1 Definition and applicability 25g37.2 Minimum Requirement 25g37.3 Test purpose . 25g37.4 Method of test . 2
20、6g37.4.1 Initial conditions . 26g37.4.2 Procedure 26g3ETSI ETSI TS 125 143 V14.0.0 (2017-04)43GPP TS 25.143 version 14.0.0 Release 147.5 Test requirements . 26g38 Out of band gain . 26g38.1 Definitions and applicability 26g38.2 Minimum Requirements . 26g38.3 Test purpose . 27g38.4 Method of test . 2
21、7g38.4.1 Initial conditions . 27g38.4.2 Procedure 27g38.5 Test requirements . 27g39 Unwanted emission 28g39.1 Out of band emission 28g39.1.1 Void 28g39.1.2 Operating band unwanted emissions 28g39.1.2.1 Definitions and applicability . 28g39.1.2.2 Minimum Requirements 29g39.1.2.3 Test purpose 32g39.1.
22、2.4 Method of test . 32g39.1.2.4.1 Initial conditions 32g39.1.2.4.2 Procedures . 33g39.1.2.5 Test requirements 33g39.1.3 Protection of BS receiver in the operating band . 36g39.1.3.1 Minimum Requirement . 36g39.1.4 Co-existence with services in adjacent frequency bands 37g39.1.4.1 Minimum requiremen
23、t 37g39.2 Spurious emissions . 37g39.2.1 Definition and applicability 37g39.2.2 Minimum Requirements . 37g39.2.2.1 Spurious emission (Category A) . 37g39.2.2.2 Spurious emission (Category B) . 38g39.2.2.3 Void. 39g39.2.2.4 Co-existence with other systems in the same geographical area . 39g39.2.2.4.1
24、 Minimum Requirements 40g39.2.2.5 Co-existence with co-located and co-sited base stations . 43g39.2.2.5.1 Minimum Requirements 44g39.2.2.6 Co-existence with PHS . 47g39.2.2.6.1 Minimum requirement. 47g39.2.2.7 Co-existence with UTRA-TDD and/or E-UTRA TDD . 48g39.2.2.7.1 Operation in the same geograp
25、hic area 48g39.2.2.7.2 Co-located Repeaters and UTRA-TDD and/or E-UTRA TDD base stations 50g39.2.2.8 (Void) 52g39.2.2.9 Protection of public safety operations . 52g39.2.2.9.1 Minimum Requirement . 52g39.2.3 Test purpose 52g39.2.4 Method of test . 52g39.2.4.1 Initial conditions . 52g39.2.4.2 Procedur
26、es . 53g39.2.5 Test requirements 53g310 Modulation accuracy 53g310.1 Error vector magnitude . 53g310.1.1 Definition and applicability 53g310.1.2 Minimum Requirements . 53g310.1.3 Test purpose 54g310.1.4 Method of test . 54g310.1.4.1 Initial conditions . 54g310.1.4.2 Procedure 54g310.1.4.3 Stimulus E
27、VM effect. 54g310.1.5 Test requirements 54g310.2 Peak code domain error 54g310.2.1 Definition and applicability 54g310.2.2 Minimum Requirements . 54g3ETSI ETSI TS 125 143 V14.0.0 (2017-04)53GPP TS 25.143 version 14.0.0 Release 1410.2.3 Test purpose 54g310.2.4 Method of test . 55g310.2.4.1 Initial co
28、nditions . 55g310.2.4.2 Procedure 55g310.2.5 Test requirements 55g310.3 Relative Code Domain Error (RCDE) for 64QAM modulation . 55g310.3.1 Definition and applicability 55g310.3.2 Minimum requirement 55g310.3.3 Test purpose 55g310.3.4 Method of test . 55g310.3.4.1 Initial conditions . 55g310.3.4.2 P
29、rocedure 56g310.3.5 Test requirements 56g311 Input intermodulation . 56g311.1 Definition and applicability 56g311.2 Minimum Requirements . 56g311.2.1 General requirement . 56g311.2.2 Co-location with BS in other systems . 56g311.2.3 Co-existence with other systems . 61g311.3 Test purpose . 65g311.4
30、Method of test . 65g311.4.1 Initial conditions . 65g311.4.2 Procedure 66g311.5 Test requirements . 66g311.5.1 Mandatory requirement . 66g311.5.2 Co-location with BS in other systems . 66g311.5.3 Co-existence with other systems . 71g312 Output intermodulation 75g312.1 Definition and applicability 75g
31、312.2 Minimum requirement 76g312.3 Test purpose . 76g312.4 Method of test . 76g312.4.1 Initial conditions . 76g312.4.2 Procedures. 76g312.5 Test requirements . 76g313 Adjacent Channel Rejection Ratio (ACRR) . 77g313.1 Definitions and applicability 77g313.2 Minimum Requirements . 77g313.3 Test purpos
32、e . 77g313.4 Method of test . 77g313.4.1 Initial conditions . 77g313.4.2 Procedure 77g313.4.3 Test Requirements 78g3Annex A (informative): Repeater measurement system set-up 79g3A.1 Maximum output power . 79g3A.2 Frequency stability . 79g3A.3 Out of band gain . 79g3A.4 Unwanted emission: Spectrum em
33、ission mask 79g3A.5 Unwanted emission: Spurious emission . 80g3A.6 Modulation Accuracy: Error Vector Magnitude 80g3A.7 Modulation Accuracy: Peak Code Domain Error Error and Relative Coder Domain Error 80g3A.8 Input inter modulation 81g3A.9 Output Intermodulation 81g3ETSI ETSI TS 125 143 V14.0.0 (201
34、7-04)63GPP TS 25.143 version 14.0.0 Release 14Annex B (informative): Derivation of Test Requirements 82g3Annex C (informative): Acceptable uncertainty of Test Equipment . 86g3Annex D (informative): Change History 87g3History 89g3ETSI ETSI TS 125 143 V14.0.0 (2017-04)73GPP TS 25.143 version 14.0.0 Re
35、lease 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document
36、, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control.
37、 Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 143 V14.0.0 (2017-04)83GPP TS 25.143 version 14.0.0 Release 1
38、41 Scope The present document specifies the Radio Frequency (RF) test methods and Minimum Requirements for UTRA FDD Repeaters. These have been derived from, and are consistent with the UTRA FDD Repeater specifications defined in TS 25.106. This document establishes the minimum RF characteristics of
39、the UTRA FDD Repeater. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specifi
40、c reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present doc
41、ument. 1 3GPP TS 25.104: “UTRA(BS) FDD; Radio transmission and Reception“. 2 3GPP TS 25.942: “RF system scenarios“. 3 3GPP TS 25.113 : “Base station EMC“. 4 ITU-R recommendation SM.329: “Unwanted emissions in the spurious domain “. 5 ITU-T recommendation O.153: “Basic parameters for the measurement
42、of error performance at bit rates below the primary rate“. 6 IEC 60721-3-3 (1994): “Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weather protected locations“. 7 IEC 60721-3-4 (1995): “Classif
43、ication of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weather protected locations“. 8 IEC 60068-2-1 (1990): “Environmental testing Part 2: Tests. Tests A: Cold“. 9 IEC 60068-2-2 (1974): “Environmental te
44、sting Part 2: Tests. Tests B: Dry heat“. 10 IEC 60068-2-6 (1995): “Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal)“. 11 3GPP TS 25.141: “Base station conformance testing (FDD)“. 12 3GPP TS 25.106: “UTRA Repeater; Radio transmission and reception“. 13 3GPP TS 36.143: “Evolved Univ
45、ersal Terrestrial Radio Access (E-UTRA); FDD repeater conformance testing“ 14 CEPT ECC Decision (13)03, “The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)“. 15 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (
46、E-UTRA); Base Station (BS) radio transmission and reception“. ETSI ETSI TS 125 143 V14.0.0 (2017-04)93GPP TS 25.143 version 14.0.0 Release 143 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Donor coupling lo
47、ss: is the coupling loss between the repeater and the donor base station. Down-link: signal path where base station transmits and mobile receives Maximum output power, Pmax: This is the mean power level per carrier measured at the antenna connector of the Repeater in specified reference condition. O
48、perating band: the frequency range in which UTRA FDD operates, that is defined with a specific set of technical requirements. NOTE 1: The operating band(s) for an UTRA Repeater is declared by the manufacturer according to the designations in clause 4.1, Table 4.1. NOTE 2: Unless specified, operating
49、 band refers to the uplink operating band and downlink operating band. Pass band: the pass band is the frequency range in which the Repeater operates in with operational configuration. This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are not consecutive each subset of channels shall be considered as an individual pass band. A repeater can have one or several pass bands. Repeater: a device that receives, amplifies and transmits the radiated or conducted RF carrier both in the
