1、 ETSI TS 1Universal Mobile TelRequirements for suppNavigation SFrequenc(3GPP TS 25.1TECHNICAL SPECIFICATION125 172 V13.0.0 (2016elecommunications System (pport of Assisted Galileo and ASatellite Systems (A-GANSS)ncy Division Duplex (FDD) .172 version 13.0.0 Release 1316-01) (UMTS); d Additional S) 1
2、3) ETSI ETSI TS 125 172 V13.0.0 (2016-01)13GPP TS 25.172 version 13.0.0 Release 13Reference RTS/TSGR-0425172vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non
3、lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of t
4、he present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific net
5、work drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the
6、present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as auth
7、orized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PL
8、UGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associa
9、tion. ETSI ETSI TS 125 172 V13.0.0 (2016-01)23GPP TS 25.172 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI
10、 members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr
11、.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential t
12、o the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as
13、 being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will
14、“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 172 V13.0.0 (2016-01)33GPP T
15、S 25.172 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols, abbreviations and test tolerances . 7g33.1 Definitions 7g33.2 Symbols 7g33.3 Abbreviations . 7g33.4 Test tolerances 8g3
16、4 General . 8g34.1 Introduction 8g34.2 Measurement parameters 9g34.2.1 UE-based A-GANSS measurement parameters 9g34.2.2 UE-assisted A-GANSS measurement parameters 9g34.3 Response time 9g34.4 Time assistance 9g34.4.1 Use of fine time assistance 9g34.5 RRC states 10g34.6 2D position error 10g34.7 User
17、 equipment supporting multiple constellations . 10g34.8 User equipment supporting multiple signals 10g35 A-GANSS minimum performance requirements . 10g35.1 Sensitivity . 11g35.1.1 Coarse time assistance 11g35.1.1.1 Minimum requirements (coarse time assistance) 11g35.1.2 Fine time assistance 12g35.1.
18、2.1 Minimum requirements (fine time assistance) 12g35.2 Nominal accuracy . 12g35.2.1 Minimum requirements (nominal accuracy) . 13g35.3 Dynamic range . 13g35.3.1 Minimum requirements (dynamic range) . 14g35.4 Multi-path scenario. 14g35.4.1 Minimum requirements (multi-path scenario) 15g35.5 Moving sce
19、nario and periodic update . 15g35.5.1 Minimum requirements (moving scenario and periodic update) 16g3Annex A (normative): Test cases 18g3A.1 Conformance tests 18g3A.2 Requirement classification for statistical testing 18g3Annex B (normative): Test conditions 19g3B.1 General . 19g3B.1.1 Parameter val
20、ues 19g3B.1.2 Time assistance 19g3B.1.3 GANSS reference time . 19g3B.1.4 Reference and UE locations . 20g3B.1.5 Satellite constellation and assistance data 20g3B.1.6 Atmospheric delay 20g3ETSI ETSI TS 125 172 V13.0.0 (2016-01)43GPP TS 25.172 version 13.0.0 Release 13B.1.7 Sensors . 20g3B.1.8 Informa
21、tion elements 20g3B.1.9 GNSS signals 20g3B.1.10 RESET UE POSITIONING STORED INFORMATION Message . 20g3B.1.11 GNSS system time offsets 21g3Annex C (normative): Propagation conditions 22g3C.1 Static propagation conditions . 22g3C.2 Multi-path case . 22g3Annex D (normative): Measurement sequence chart
22、. 24g3D.1 General . 24g3D.2 TTFF measurement sequence chart 24g3D.3 Periodic update measurement sequence chart 25g3Annex E (normative): Assistance data required for testing . 27g3E.1 Introduction 27g3E.2 GPS assistance data 27g3E.3 GANSS assistance data 27g3Annex F (normative): Converting UE-assiste
23、d measurement reports into position estimates . 31g3F.1 Introduction 31g3F.2 UE measurement reports 31g3F.3 Weighted Least Squares (WLS) position solution . 32g3Annex G (informative): Change history . 35g3History 36g3ETSI ETSI TS 125 172 V13.0.0 (2016-01)53GPP TS 25.172 version 13.0.0 Release 13Fore
24、word This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be
25、 re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the secon
26、d digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 172 V13.0.0 (2016-01)63GPP TS 25.172 version 13.0.0 Release 131 Scope The
27、 present document establishes the minimum performance requirements for A-GANSS for FDD mode of UTRA for the User Equipment (UE) that supports A-GANSS. It includes the minimum performance requirements for both UE-based and UE-assisted A-GANSS. The minimum performance requirements also include combina
28、tions of A-GPS and A-GANSS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For
29、a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the
30、present document. 1 3GPP TS 25.101: “User Equipment (UE) radio transmission and reception (FDD)“. 2 3GPP TS 25.104: “Base Station (BS) radio transmission and reception (FDD)“. 3 IS-GPS-200, Revision D, “Navstar GPS Space Segment/Navigation User Interfaces“, March 7th, 2006. 4 IS-GPS-705, “Navstar GP
31、S Space Segment/User Segment L5 Interfaces“, September 22, 2005. 5 IS-GPS-800, “Navstar GPS Space Segment/User Segment L1C Interfaces“, September 4, 2008. 6 IS-QZSS, “Quasi Zenith Satellite System Navigation Service Interface Specifications for QZSS“, Ver.1.1, July 31, 2009. 7 “Galileo OS Signal in
32、Space ICD (OS SIS ICD)“, Draft 0, Galileo Joint Undertaking, May 23rd, 2006. 8 “Global Navigation Satellite System GLONASS Interface Control Document“, Version 5.1, 2008. 9 “Specification for the Wide Area Augmentation System (WAAS) “, US Department of Transportation, Federal Aviation Administration
33、, DTFA01-96-C-00025, 2001. 10 3GPP TS 25.171: “Requirements for support of Assisted Global Positioning System (A-GPS) Frequency Division Duplex (FDD)“. 11 3GPP TS 34.171: “Terminal Conformance Specification, Assisted Global Positioning System (A-GPS) (FDD)“. 12 3GPP TS 34.172: “Terminal Conformance
34、Specification, Assisted Galileo and Additional Navigation Satellite Systems (A-GANSS) (FDD)“. 13 3GPP TS 34.109: “Special conformance testing functions“. 14 3GPP TS 25.331: “Radio Resource Control (RRC) protocol specification“. 15 ETSI TR 102 273-1-2: “Electromagnetic compatibility and Radio spectru
35、m Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. ETSI ETSI TS 125 172 V13.0.0 (2016-0
36、1)73GPP TS 25.172 version 13.0.0 Release 1316 P. Axelrad, R.G. Brown, “GPS Navigation Algorithms“, in Chapter 9 of “Global Positioning System: Theory and Applications“, Volume 1, B.W. Parkinson, J.J. Spilker (Ed.), Am. Inst. of Aeronautics and Astronautics Inc., 1996. 17 S.K. Gupta, “Test and Evalua
37、tion Procedures for the GPS User Equipment“, ION-GPS Red Book, Volume 1, p. 119. 18 3GPP TS 25.215: “Physical layer; Measurements (FDD)“. 19 BeiDou Navigation Satellite System Signal In Space Interface Control Document Open Service Signal B1I(Version 1.0), China Satellite Navigation Office, December
38、 2012. 3 Definitions, symbols, abbreviations and test tolerances 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 25.101 1, 3GPP TS 25.104 2 and the following apply: Horizontal Dilution Of Precision (HDOP): measure of position determination accurac
39、y that is a function of the geometrical layout of the satellites used for the fix, relative to the receiver antenna. 3.2 Symbols For the purposes of the present document, the following symbol applies: B1I BeiDou B1I navigation signal with carrier frequency of 1561.098 MHz. c Speed of light. E1 Galil
40、eo E1 navigation signal with carrier frequency of 1575.420 MHz. E5 Galileo E5 navigation signal with carrier frequency of 1191.795 MHz. E6 Galileo E6 navigation signal with carrier frequency of 1278.750 MHz. G1 GLONASS navigation signal in the L1 sub-bands with carrier frequencies 1602 MHz k 562.5 k
41、Hz. G2 GLONASS navigation signal in the L2 sub-bands with carrier frequencies 1246 MHz k 437.5 kHz. k GLONASS channel number, k = -713. L1 C/A GPS or QZSS L1 navigation signal carrying the Coarse/Acquisition code with carrier frequency of 1575.420 MHz. L1C GPS or QZSS L1 Civil navigation signal with
42、 carrier frequency of 1575.420 MHz. L2C GPS or QZSS L2 Civil navigation signal with carrier frequency of 1227.600 MHz. L5 GPS or QZSS L5 navigation signal with carrier frequency of 1176.450 MHz. G Geometry Matrix. iGNSSm, Measured pseudo-range of satellite i of GNSSm. W Weighting Matrix. iGNSSm,1 Li
43、ne of sight unit vector from the user to the satellite i of GNSSm. x State vector of user position and clock bias. 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: A-GANSS Assisted-Galileo and Additional Navigation Satellite Systems A-GNSS Assisted-GNSS
44、A-GPS Assisted-Global Positioning System AWGN Additive White Gaussian Noise BDS BeiDou Navigation Satellite System ETSI ETSI TS 125 172 V13.0.0 (2016-01)83GPP TS 25.172 version 13.0.0 Release 13C/A Coarse/Acquisition DUT Device Under Test ECEF Earth-Centered, Earth-Fixed ECI Earth-Centered-Inertial
45、FDD Frequency Division Duplex GEO Geostationary Earth Orbit GLONASS GLObalnaya NAvigatsionnaya Sputnikovaya Sistema (Engl.: Global Navigation Satellite System) GNSS Global Navigation Satellite System GPS Global Positioning System GSS GNSS System SimulatorHDOP Horizontal Dilution Of Precision ICD Int
46、erface Control Document IGSO Inclined Geosynchronous Satellite Orbit IS Interface Specification LOS Line Of Sight MEO Medium Earth Orbit QZS Quasi-Zenith Satellite QZSS Quasi-Zenith Satellite System RF Radio Frequency RRC Radio Resource Control SBAS Space Based Augmentation System SFN System Frame N
47、umber SS FDD System Simulator SV Space Vehicle TBD To Be Determined TOD Time Of Day TOW Time Of Week TTFF Time To First Fix UE User EquipmentUTRA Universal Terrestrial Radio Access UTRAN Universal Terrestrial Radio Access Network WLS Weighted Least Squares WGS-84 World Geodetic System 1984 3.4 Test
48、tolerances The requirements given in the present document make no allowance for measurement uncertainty. The test specification 3GPP TS 34.172 12 defines test tolerances. These test tolerances are individually calculated for each test. The test tolerances are then added to the limits in the present
49、document to create test limits. The measurement results are compared against the test limits as defined by the shared risk principle. Shared Risk is defined in ETR 273-1-2 15, subclause 6.5. 4 General 4.1 Introduction The present document defines the minimum performance requirements for both UE-based and UE-assisted FDD A-GANSS terminals. The minimum performance requirements also include combinations of A-GPS and A-GANSS. ETSI ETSI TS 125 172 V13.0.0 (2016-01)93GPP TS 25.172 version 13.0.0 Release 134.2 Measurement para
