1、 ETSI TS 125 306 V15.2.0 (2018-07) Universal Mobile Telecommunications System (UMTS); UE Radio Access capabilities (3GPP TS 25.306 version 15.2.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 306 V15.2.0 (2018-07)13GPP TS 25.306 version 15.2.0 Release 15Reference RTS/TSGR-0625306vf20 Keywords
2、 UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded fr
3、om: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or per
4、ceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to rev
5、ision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Comm
6、iteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written
7、authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for
8、 the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 306 V15.2.0 (2018-07)23GPP TS 25.306 version 15.2.0 Release 15Intellectual Pr
9、operty Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Pro
10、perty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR se
11、arches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks a
12、nd/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
13、 not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using
14、their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the
15、 present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliver
16、ables except when used in direct citation. ETSI ETSI TS 125 306 V15.2.0 (2018-07)33GPP TS 25.306 version 15.2.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 6g33.1 Defin
17、itions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 UE radio access capability parameters . 6g34.1 PDCP parameters . 7g34.2 Void 7g34.3 RLC, MAC-hs, MAC-ehs and MAC-i/is parameters . 7g34.4 Void 8g34.5 PHY parameters . 8g34.5.1 Transport channel parameters in downlink . 8g34.5.2 Transport channel para
18、meters in uplink 9g34.5.3 FDD Physical channel parameters in downlink 11g34.5.4 FDD physical channel parameters in uplink . 15g34.5.5 TDD physical channel parameters in downlink 17g34.5.5.1 3.84 Mcps TDD and 7.68 Mcps TDD physical channel parameters in downlink . 17g34.5.5.2 1.28 Mcps TDD physical c
19、hannel parameters in downlink. 18g34.5.6 TDD physical channel parameters in uplink . 19g34.5.6.1 3.84 Mcps TDD and 7.68 Mcps TDD physical channel parameters in uplink 20g34.5.6.2 1.28 Mcps TDD physical channel parameters in uplink . 20g34.5.7 RF parameters . 21g34.6 Multi-mode related parameters . 2
20、1g34.7 Multi-RAT related parameters . 21g34.7a Security parameters 23g34.8 UE positioning related parameters . 23g34.9 Measurement related capabilities (FDD only) 24g34.9a Measurement related capabilities (TDD only) . 26g34.10 General capabilities 26g34.11 DL capabilities with simultaneous HS-DSCH .
21、 26g34.12 UL capabilities with simultaneous E-DCH 27g34.13 UE minimum capabilities for reception of MBMS not provided in MBSFN mode . 28g34.13a UE minimum capabilities for reception of MBMS provided in MBSFN mode . 32g34.14 Home Node B Inbound Mobility Related Parameters 37g34.14.1 CSG Proximity Ind
22、ication Parameters 37g34.14.2 Neighbour Cell SI Acquisition Parameters . 37g34.14a IMS Voice Parameters 37g34.15 UE based network performance measurements parameters . 37g35 Possible UE radio access capability parameter settings . 38g35.1 Value ranges . 38g35.2 Reference UE radio access capability c
23、ombinations 61g35.2.1 Combinations of common UE Radio Access Parameters for UL and DL 62g35.2.2 Combinations of UE Radio Access Parameters for DL 64g35.2.3 Combinations of UE Radio Access Parameters for UL 67g3Annex A (informative): Change history . 68g3History 73g3ETSI ETSI TS 125 306 V15.2.0 (2018
24、-07)43GPP TS 25.306 version 15.2.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify
25、 the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG ap
26、proved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 306 V15.2.0 (2018-07)53G
27、PP TS 25.306 version 15.2.0 Release 151 Scope The present document identifies the parameters of the access stratum part of the UE radio access capabilities. Furthermore, some reference configurations of these values are defined. The intention is that these configurations will be used for test specif
28、ications. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non specific. - For a specific referen
29、ce, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
30、1 3GPP TS 25.323: “Packet Data Convergence Protocol (PDCP) specification“. 2 3GPP TS 34.108: “Common Test Environments for User Equipment (UE) Conformance Testing“. 3 3GPP TS 34.123-2: “User Equipment (UE) conformance specification; Part 2: Implementation Conformance Statement (ICS) proforma specifi
31、cation“. 4 3GPP TS 25.101 “UE Radio Transmission and Reception (FDD)“. 5 3GPP TS 25.102 “UTRA (UE) TDD; Radio transmission and reception“. 6 3GPP TS 25.215 “Physical layer; Measurements (FDD)“. 7 RFC 2507: “IP Header Compression“. 8 RFC 3095: “RObust Header Compression (ROHC): Framework and four pro
32、files“. 9 3GPP TS 25.321 “Medium Access Control (MAC) protocol specification“. 10 3GPP TS 25.322 “Radio Link Control (RLC) protocol specification“. 11 3GPP TS 25.211 “Physical channels and mapping of transport channels onto physical channels (FDD)“. 12 3GPP TS 25.331 “Radio Resource Control (RRC); P
33、rotocol Specification“. 13 3GPP TS 25.308 “High Speed Downlink Packet Access (HSDPA); Overall description; Stage 2“. 14 3GPP TS 25.221 “Physical channels and mapping of transport channels onto physical channels (TDD)“. 15 RFC 4815: “RObust Header Compression (ROHC): Corrections and Clarifications to
34、 RFC 3095“. 16 3GPP TS 25.307: “ Requirement on User Equipments (UEs) supporting a release-independent frequency band“. 17 3GPP TS 36.331: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol Specification“. 18 3GPP TS 36.101: “User Equipment (UE) radio transm
35、ission and reception“. 19 3GPP TS 25.300: “Universal Terrestrial Radio Access Network (UTRAN); General description; Stage 2“. 20 3GPP TS 25.133: “Requirements for support of radio resource management (FDD)“. ETSI ETSI TS 125 306 V15.2.0 (2018-07)63GPP TS 25.306 version 15.2.0 Release 1521 3GPP TS 25
36、.225: “Physical layer Measurements (TDD)“. 22 3GPP TS 25.304: “User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode“. 23 3GPP TS 24.312: “Access Network Discovery and Selection Function (ANDSF) Management Object (MO)“. 24 3GPP TS 36.133: “Evolved Universa
37、l Terrestrial Radio Access (E-UTRA); Requirements for support of radio resource management“. 25 3GPP TS 25.214 “Physical layer procedures (FDD)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the
38、following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. : 3.2 Symbols For the purposes of the present document, the following symbols apply: 3.3 Abbreviations For the purposes of the present document, the abbreviations gi
39、ven in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. AMD Acknowledged Mode Data ANDSF Access Network Discovery and Selection Function ANR Automatic Neighbour Relation BDS Bei
40、Dou Navigation Satellite System EGNOS European Geostationary Navigation Overlay Service GAN Generic Access Network GANSS Galileo and Additional Navigation Satellite Systems IPDL Idle Period DownLink MBS Metropolitan Beacon System MSAS Multi-functional Satellite Augmentation System QoE Quality of Exp
41、erience QZSS Quasi-Zenith Satellite System rSRVCC reverse Single Radio Voice Call Continuity SPS Semi-Persistent Scheduling SRVCC Single Radio Voice Call Continuity WLAN Wireless Local Area Network 4 UE radio access capability parameters In the following the UE radio capability parameters are define
42、d. When using the RRC configuration parameters, UTRAN needs to respect the UE capabilities. Only parameters for which there is a need to set different values for different UEs are considered as UE capability parameters. Therefore, the capabilities that are the same for all UEs, including baseline ca
43、pabilities, are not listed here. UTRAN needs to respect the UE capabilities when configuring the RBs. Actions in the UE when capabilities are in conflict with a UTRAN request are specified in RRC. ETSI ETSI TS 125 306 V15.2.0 (2018-07)73GPP TS 25.306 version 15.2.0 Release 154.1 PDCP parameters Supp
44、ort for RFC 2507 This parameter defines whether the UE supports header compression according to RFC 2507 as defined in 1 or not. Support for RFC 3095 This parameter defines whether the UE supports robust header compression according to 8 and 15, as defined in 1 or not. IMS capable UEs supporting voi
45、ce shall support ROHC profiles 0x0000, 0x0001, 0x0002 and be able to compress and decompress headers of PDCP SDUs at a PDCP SDU rate corresponding to supported IMS voice codecs. Support for RFC 3095 context relocation This parameter defines whether the UE supports ROHC, 8 and 15, context relocation
46、as defined in 1 or not. Support for loss-less SRNS relocation Defines whether the UE supports loss-less SRNS relocation as defined in 1 or not. Support for lossless DL RLC PDU size change Defines whether the UE supports lossless DL RLC PDU size change as defined in 1 or not. Maximum header compressi
47、on context space This parameter is only applicable if the UE supports header compression according to RFC 2507. It is defined as the maximum header compression context size supported by the UE for all RFC 2507 protocol entities for all RBs. UTRAN controls that the UE capability can be fulfilled thro
48、ugh the following parameters: 1. MAX_HEADER; 2. TCP_SPACE; 3. NON_TCP_SPACE; The context space for a single RFC 2507 protocol entity calculates from: (2 * (TCP_SPACE + 1 + NON_ TCP_SPACE + 1) * MAX_HEADER). The following criterion must be fulfilled in the configuration: Maximum header compression co
49、ntext space sum of context spaces for all RFC 2507 protocol entities for all RBs. Maximum number of ROHC context sessions This parameter is only applicable if the UE supports header compression according to 8 and 15. It is defined as the maximum number of header compression context sessions supported by the UE. Support for Reverse Decompression This parameter determines whether reverse decompression is supported or not and the maximum number of packets that can be reverse decompressed by the
