ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf

上传人:bonesoil321 文档编号:741574 上传时间:2019-01-11 格式:PDF 页数:73 大小:629.77KB
下载 相关 举报
ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf_第1页
第1页 / 共73页
ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf_第2页
第2页 / 共73页
ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf_第3页
第3页 / 共73页
ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf_第4页
第4页 / 共73页
ETSI TS 125 346-2016 Universal Mobile Telecommunications System (UMTS) Introduction of the Multimedia Broadcast Multicast Service (MBMS) in the Radio Access Network (RAN) Stage 2 (.pdf_第5页
第5页 / 共73页
点击查看更多>>
资源描述

1、 ETSI TS 1Universal Mobile TelIntroduction of theService (MBMS) in (3GPP TS 25.3TECHNICAL SPECIFICATION125 346 V13.0.0 (2016elecommunications System (he Multimedia Broadcast/Multin the Radio Access Network (Stage 2 .346 version 13.0.0 Release 1316-01) (UMTS); ulticast k (RAN); 13) ETSI ETSI TS 125 3

2、46 V13.0.0 (2016-01)13GPP TS 25.346 version 13.0.0 Release 13Reference RTS/TSGR-0225346vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre l

3、a Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s

4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS

5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, ple

6、ase send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written per

7、mission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand

8、the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 12

9、5 346 V13.0.0 (2016-01)23GPP TS 25.346 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-memb

10、ers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant

11、 to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present documen

12、t. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to

13、the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“

14、and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 346 V13.0.0 (2016-01)33GPP TS 25.346 version 13.0

15、.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 9g34 Background and introduction . 10g35 MBMS UTRAN and protocol

16、 architecture 10g35.1 MBMS UTRAN architecture principles . 10g35.1.1 MBMS Service Context in CRNC 10g35.1.2 MBMS Session start and MBMS Session Stop 11g35.1.3 MBMS Iu bearer . 11g35.1.4 MBMS Iub bearer . 12g35.1.5 Mapping of MBMS Iu bearer to p-t-p and p-t-m connections 12g35.1.6 UE Linking/De-linki

17、ng . 12g35.1.7 RNC Registration 14g35.1.8 RNC De-Registration 14g35.1.9 CN De-Registration 14g35.1.10 URA Linking/De-linking 14g35.1.11 IP Multicast Distribution 15g35.2 MBMS Uu Principles . 15g35.2.1 MBMS Service States in UE. 15g35.2.2 One PDCP and RLC entity shared among multiple cells within one

18、 RNS . 16g35.2.3 MCCH Information Scheduling 16g35.2.4 MBMS Notification 17g35.2.5 MBMS Counting 18g35.2.6 MBMS Radio Bearer Release in the UE . 19g35.2.7 MBMS Session Repetition 20g35.2.8 MBMS Service Prioritisation 20g35.3 Protocol structure . 21g35.3.1 MBMS User Plane Protocol Stack Architecture

19、. 21g35.3.2 MBMS Control Plane Protocol Stack Architecture 22g35.4 MAC architecture . 23g35.4.1 UTRAN MAC Architecture to support MBMS 23g35.4.2 MAC-c/sh/m architecture: UTRAN side 23g35.4.3 MAC-c/sh/m architecture: UE side . 24g36 MBMS Channel Structure 25g36.1 Point-to-Point Transmission . 25g36.2

20、 Point-to-multipoint Transmission . 25g36.2.1 Logical Channels 25g36.2.1.1 MBMS point-to-multipoint Control Channel (MCCH). 25g36.2.1.2 MBMS point-to-multipoint Traffic Channel (MTCH) 25g36.2.1.3 MBMS point-to-multipoint Scheduling Channel (MSCH) . 25g36.2.2 Transport Channel 26g36.2.3 Physical Chan

21、nel 26g36.2.4 Mapping between channels . 26g36.2.5 Data Flows through Layer 2 . 27g3ETSI ETSI TS 125 346 V13.0.0 (2016-01)43GPP TS 25.346 version 13.0.0 Release 136.2.5.1 Data flow for MCCH mapped to FACH . 27g36.2.5.2 Data flow for MTCH mapped to FACH . 27g36.2.5.3 Data flow for MSCH mapped to FACH

22、 27g36.3. MBMS Notification Indicator Channel 27g37 MBMS Reception and UE Capability 27g37.1 Selective and Soft Combining for MBMS P-T-M transmission . 27g37.1.bis Simulcast Combining (TDD only) 28g37.1.ter Chip Combining (1.28Mcps TDD) . 29g37.1A MBMS over a Single Frequency Network (MBSFN) 30g37.1

23、A.1 3.84 / 7.68 MCPS TDD MBMS over a Single Frequency Network (MBSFN) 31g37.1A.2 FDD MBMS over a Single Frequency Network (MBSFN) 32g37.1A.3 1.28 MCPS TDD MBMS over a Single Frequency Network (MBSFN) 32g37.1A.4 3.84 Mcps TDD IMB MBMS over a Single Frequency Network (MBSFN) . 33g37.1B MBMS in case of

24、 inter-RNC synchronization 34g37.1B.1 Control Plane aspects 34g37.1B.1.1 MBMS Parameter Configurations . 34g37.1B.1.2 MBMS Counting and mode switch coordination 34g37.1B.1.3 Control Plane Coordination at MBMS Session Start 35g37.1B.1.3.1 Coordination of neighbor cell configuration . 35g37.1B.1.4 MCC

25、H synchronization in an MBSFN cluster 36g37.1B.2 User Plane aspects 36g37.1B.2.1 Timing requirements . 36g37.1B.2.2 MBMS User Data flow synchronization . 36g37.1B.2.3 User Plane recovery in case of Multiple Packets Loss 37g37.2 UE Capability . 38g37.3 MBMS Reception . 39g37.3.1 MBMS Reception in RRC

26、 Idle Mode . 39g37.3.2 MBMS Reception in RRC Connected Mode: URA_PCH state . 39g37.3.3 MBMS Reception in RRC Connected Mode: CELL_PCH state 40g37.3.4 MBMS Reception in RRC Connected Mode: CELL_FACH state . 40g37.3.5 MBMS Reception in RRC Connected Mode: CELL_DCH state . 40g38 UTRAN Signalling Flows

27、for MBMS . 41g38.1 MBMS High Level Signalling Scenarios . 41g38.1.1 Session start 41g38.1.2 Joining (during a session) . 43g38.1.3 Recounting 44g38.1.4 Session stop 45g38.2 MBMS RNC Signalling Flows . 45g38.2.1 MBMS Session Start procedure 45g38.2.2 MBMS Session Update procedure 46g38.2.3 MBMS Sessi

28、on Stop procedure 46g38.2.4 RNC Registration procedure . 47g38.2.5 RNC De-Registration procedure . 47g38.2.6 CN De-Registration procedure . 47g38.2.7 MBMS Channel Type Switching over Uu 48g38.2.8 MBMS UE Linking 48g38.2.9 MBMS UE De-Linking 49g38.2.10 MBMS Service Id Request . 49g38.2.11 MBMS Attach

29、/Detach over Iur . 50g38.2.12 MBMS Channel Type Reconfiguration over Iur 50g38.2.13 Information Exchange over Iur . 51g38.2.14 MBMS RAB Establishment Indication. 52g38.2.15 MBMS RAB Release 52g38.2.16 MBMS Session Start procedure in case of IP Multicast transport 53g38.2.17 MBSFN MCCH Information 54

30、g38.3 MBMS Uu Signalling Flows 54g38.3.1 Broadcast of MBMS System Information 54g38.3.2 MBMS Service Information . 55g38.3.3 MBMS Radio Bearer Information 55g38.3.4 MBMS Access Information 56g3ETSI ETSI TS 125 346 V13.0.0 (2016-01)53GPP TS 25.346 version 13.0.0 Release 138.3.5 MBMS Neighbouring Cell

31、 Information 56g38.3.6 MBMS Joined Indication 57g38.3.7 MTCH Scheduling Information 57g38.3.8 MBMS Change Information . 58g38.3.9 MBMS P-T-P Modification Request 58g38.3.10 MBMS Counting Response 59g38.3.11 MBMS Selected Services Information . 59g39 Security for MBMS 59g310 Mobility Procedures for M

32、BMS . 60g310.1 Use of Periodical Transmission of MBMS Critical Information 60g310.2 UE Actions for Mobility . 60g310.2.1 RRC idle mode . 60g310.2.2 URA_PCH State . 61g310.2.3 CELL_PCH. 61g310.2.4 CELL_FACH 62g310.2.5 CELL_DCH State . 62g311 Resource Management for MBMS . 63g311.1 MBMS Access Control

33、 Procedure . 63g311.2 Frequency layer Convergence 64g311.3 Frequency layer Dispersion 64g3Annex A (informative): MBMS Phases in UTRAN . 65g3A1 Security for MBMS 65g3A2 MBMS Phase 2 . 65g3A3 MBMS Phase 3 . 66g3A4 MBMS Phases and Status Parameters 66g3Annex B (informative): MBMS Control Information .

34、67g3Annex C (informative): Change history . 69g3History 72g3ETSI ETSI TS 125 346 V13.0.0 (2016-01)63GPP TS 25.346 version 13.0.0 Release 13Foreword This Technical Report has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing

35、work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented

36、 to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only ch

37、anges have been incorporated in the document. ETSI ETSI TS 125 346 V13.0.0 (2016-01)73GPP TS 25.346 version 13.0.0 Release 131 Scope The present document is a technical specification of the overall support of Multimedia Broadcast Multicast Service in UTRA. 2 References The following documents contai

38、n provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific

39、 reference, the latest version applies. 1 3GPP TR 21.905: “ Vocabulary for 3GPP Specifications “. 2 3GPP TS 22.146: “Multimedia Broadcast/Multicast Service; Stage 1“. 3 3GPP TS 22.246: “MBMS User Services; Stage 1“. 4 3GPP TS 23.246: “Multimedia Broadcast Multicast Service; Architecture and Function

40、al Description“. 5 3GPP TR 25.992: “Multimedia Broadcast Multicast Service (MBMS); UTRAN/GERAN Requirements“. 6 3GPP TS 23.236: “Intra-domain connection of Radio Access Network (RAN) nodes to multiple Core Network (CN) nodes“. 7 3GPP TS 33.246: “3G Security; Security of Multimedia Broadcast/Multicas

41、t Service (MBMS)“. 8 3GPP TS 25.301: “Radio Interface Protocol Architecture“. 9 3GPP TS 25.211: “Physical channels and mapping of transport channels onto physical channels (FDD)“. 10 3GPP TS 25.221: “Physical channels and mapping of transport channels onto physical channels (TDD) “. 11 3GPP TS 25.30

42、4: “User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode“. 12 3GPP TS 25.306: “UE Radio Access capabilities“. 13 3GPP TS 25.331: “Radio Resource Control (RRC); Protocol Specification“. 14 3GPP TS 25.446: MBMS Synchronisation Protocol (SYNC). 15 3GPP TS 23

43、.007: Restoration procedures. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply. ETSI ETSI TS 125 346 V13.0.0 (2016-01)83GPP TS 25.346 version 13.0.0 Release 13Service 1 availability Data transfer Data transfe

44、r Data transfer Idle period of seconds Start Service 1 announcement Stop Service 1 announcement 1stsession start 1stsession stop Service 1 Session 2 Service 1 session 1 Service 1 events Figure 3.1: MBMS Timeline, based on 4. MBMS session start is the point at which the BM-SC is ready to send data. M

45、BMS notification informs the UEs about forthcoming and about ongoing MBMS data transfer. MBMS Cell Group is a group of multiple cells belonging to one RNS and sharing one PDCP and RLC entity to utilize p-t-m transmission of the MBMS Service MBMS session stop is the point at which the BM-SC determine

46、s that there will be no more data to send for some period of time. Data transfer is the phase when MBMS data are transferred to the UEs. MBMS service availability is the phase between start of service announcement and the end of the last session or stop of service announcement. MBMS Iu data bearer d

47、enotes the data bearer established between SGSN and RNC to transport MBMS data MBMS radio bearer denotes the data bearer established between RNC and UE(s) to transport MBMS data MBMS RAB denotes both, the MBMS Iu data bearer and the MBMS radio bearer MBMS Service Context contains the necessary infor

48、mation for the UTRAN to control the MBMS Service in UTRAN. MBMS Activated Services: a set of services made up of those in MBMS multicast mode that the UE has joined as well as those in MBMS broadcast mode that the UE is interested in receiving. MBMS Selected Services: a subset of the MBMS activated

49、services in MBMS Broadcast mode for which the UE applies RRC procedures to inform UTRAN that the service has been selected (by upper layers). MBMS Iu signalling connection denotes the signalling connection established between the RNC and the CN node to serve one MBMS Service Context. MBMS Service Announcement: Mechanism to allow users to be informed about the MBMS services available 4 Pool area: see definition in ref.6 MBMS Multicast Service Activation: see description in ref.4 Critical Information: MBMS Neighbouring Cell Inform

展开阅读全文
相关资源
猜你喜欢
  • BS EN 60255-21-3-1995 Electrical relays - Vibration shock bump and seismic tests on measuring relays and protection equipment - Seismic tests《电气继电器 第21部分 量度继电器和保护装置用振动、冲击、碰撞和地震试验 第.pdf BS EN 60255-21-3-1995 Electrical relays - Vibration shock bump and seismic tests on measuring relays and protection equipment - Seismic tests《电气继电器 第21部分 量度继电器和保护装置用振动、冲击、碰撞和地震试验 第.pdf
  • BS EN 60255-24-2001 Electrical relays Common format for transient data exchange (COMTRADE) for power systems《继电器 电力系统数据交换的通用格式》.pdf BS EN 60255-24-2001 Electrical relays Common format for transient data exchange (COMTRADE) for power systems《继电器 电力系统数据交换的通用格式》.pdf
  • BS EN 60255-27-2014 Measuring relays and protection equipment Product safety requirements《测量继电器和保护设备 产品安全要求》.pdf BS EN 60255-27-2014 Measuring relays and protection equipment Product safety requirements《测量继电器和保护设备 产品安全要求》.pdf
  • BS EN 60255-5-2001 Electrical relays Insulation coordination for measuring relays and protection equipment Requirements and tests《继电器 测量继电器和保护设备的绝缘协调性 试验和要求》.pdf BS EN 60255-5-2001 Electrical relays Insulation coordination for measuring relays and protection equipment Requirements and tests《继电器 测量继电器和保护设备的绝缘协调性 试验和要求》.pdf
  • BS EN 60264-2-1-1992 Packaging for winding wires - Cylindrical barrelled delivery spools - Basic dimensions《绕组线的封装 圆桶形输出线轴 基本尺寸》.pdf BS EN 60264-2-1-1992 Packaging for winding wires - Cylindrical barrelled delivery spools - Basic dimensions《绕组线的封装 圆桶形输出线轴 基本尺寸》.pdf
  • BS EN 60264-2-2-1992 Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material《绕组线的封装 圆桶装交货线盘 热塑塑料制可.pdf BS EN 60264-2-2-1992 Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material《绕组线的封装 圆桶装交货线盘 热塑塑料制可.pdf
  • BS EN 60264-2-3-1992 Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material《绕组线的封装 第2部分 圆桶装交货.pdf BS EN 60264-2-3-1992 Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material《绕组线的封装 第2部分 圆桶装交货.pdf
  • BS EN 60264-3-1-2000 Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions《绕组线封装 锥形输出线轴 基本尺寸》.pdf BS EN 60264-3-1-2000 Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions《绕组线封装 锥形输出线轴 基本尺寸》.pdf
  • BS EN 60264-3-2-1999 Packaging of winding wires - Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials《绕组线封装 锥形输出线轴 热塑性材料制可回收使用的线.pdf BS EN 60264-3-2-1999 Packaging of winding wires - Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials《绕组线封装 锥形输出线轴 热塑性材料制可回收使用的线.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1