1、 ETSI TS 1Digital cellular telecommUniversal Mobile TelAT command (3GPP TS 27.0TECHNICAL SPECIFICATION127 007 V13.4.0 (2016mmunications system (Phase elecommunications System (LTE; d set for User Equipment (UE.007 version 13.4.0 Release 1316-04) e 2+) (GSM); (UMTS); E) 13) ETSI ETSI TS 127 007 V13.4
2、.0 (2016-04)13GPP TS 27.007 version 13.4.0 Release 13Reference RTS/TSGC-0127007vd40 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre l
3、a Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s
4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS
5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, ple
6、ase send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written per
7、mission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand
8、the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 12
9、7 007 V13.4.0 (2016-04)23GPP TS 27.007 version 13.4.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-memb
10、ers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant
11、 to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present documen
12、t. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to
13、the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“
14、and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 127 007 V13.4.0 (2016-04)33GPP TS 27.007 version 13.4
15、.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 9g31 Scope 10g32 References 10g33 Definitions and abbreviations . 17g33.1 Definitions 17g33.2 Abbreviations . 17g34 AT command syntax 18g34.0 General . 18g34.1 Command line 18g34.2 Information r
16、esponses and result codes 19g34.3 ITU-T Recommendation V.250 14 TE-TA interface commands 19g35 General commands . 20g35.0 General . 20g35.1 Request manufacturer identification +CGMI . 20g35.2 Request model identification +CGMM 21g35.3 Request revision identification +CGMR 21g35.4 Request product ser
17、ial number identification +CGSN . 22g35.5 Select TE character set +CSCS 23g35.6 Request international mobile subscriber identity +CIMI . 24g35.7 Multiplexing mode +CMUX 25g35.8 ITU-T Recommendaton V.250 14 generic TA control commands 27g35.9 PCCA STD-101 17 select wireless network +WS46 . 27g35.10 I
18、nformative examples . 28g36 Call control commands and methods . 29g36.0 General . 29g36.1 Select type of address +CSTA 29g36.2 ITU-T Recommendation V.250 14 dial command D . 30g36.3 Direct dialling from phonebooks 30g36.4 Call mode +CMOD 32g36.4A Voice call mode +CVMOD 32g36.5 Hangup call +CHUP . 33
19、g36.6 Alternating mode call control method 34g36.7 Select bearer service type +CBST 35g36.8 Radio link protocol +CRLP 38g36.9 Service reporting control +CR 39g36.10 Extended error report +CEER 39g36.11 Cellular result codes +CRC 40g36.12 HSCSD device parameters +CHSD . 42g36.13 HSCSD transparent cal
20、l configuration +CHST 43g36.14 HSCSD non-transparent call configuration +CHSN 43g36.15 HSCSD current call parameters +CHSC 44g36.16 HSCSD parameters report +CHSR 45g36.17 HSCSD automatic user initiated upgrading +CHSU 45g36.18 HSCSD non-transparent asymmetry configuration +CHSA 46g36.19 Single numbe
21、ring scheme +CSNS . 47g36.20 Voice hangup control +CVHU . 47g36.21 CCITT V.120 36 rate adaption protocol +CV120 . 48g36.22 Settings date format +CSDF . 49g3ETSI ETSI TS 127 007 V13.4.0 (2016-04)43GPP TS 27.007 version 13.4.0 Release 136.23 Silence command +CSIL 50g36.24 Settings time format +CSTF .
22、51g36.25 ITU-T Recommendation V.250 14 call control commands . 52g36.26 ITU-T Recommendation V.250 14 data compression commands . 52g36.27 Initiate eCall +CECALL 52g36.28 Informative examples . 53g37 Network service related commands . 54g37.0 General . 54g37.1 Subscriber number +CNUM 54g37.2 Network
23、 registration +CREG . 55g37.3 PLMN selection +COPS 57g37.4 Facility lock +CLCK 59g37.5 Change password +CPWD . 61g37.6 Calling line identification presentation +CLIP . 61g37.7 Calling line identification restriction +CLIR 63g37.8 Connected line identification presentation +COLP 64g37.9 Called line i
24、dentification presentation +CDIP 65g37.10 Closed user group +CCUG . 66g37.11 Call forwarding number and conditions +CCFC 67g37.12 Call waiting +CCWA . 68g37.13 Call related supplementary services +CHLD . 70g37.14 Call deflection +CTFR . 71g37.15 Unstructured supplementary service data +CUSD . 72g37.
25、16 Advice of charge +CAOC 73g37.17 Supplementary service notifications +CSSN . 74g37.18 List current calls +CLCC . 76g37.19 Preferred PLMN list +CPOL 77g37.20 Selection of preferred PLMN list +CPLS. 79g37.21 Read operator names +COPN 80g37.22 eMLPP priority registration and interrogation +CAEMLPP 80
26、g37.23 eMLPP subscriptions +CPPS . 81g37.24 Fast call setup conditions +CFCS. 81g37.25 Automatic answer for eMLPP service +CAAP 82g37.26 User to user signalling service 1 +CUUS1 . 82g37.27 Preferred network indication +CPNET 84g37.28 Preferred network status +CPNSTAT 85g37.29 Current packet switched
27、 bearer +CPSB . 85g37.30 Calling name identification presentation +CNAP 87g37.31 Connected line identification restriction status +COLR . 88g37.32 Service specific access control restriction status +CSSAC 88g37.33 Network emergency bearer services support +CNEM . 90g37.34 Enhanced closed user group
28、+CECUG 91g37.35 Communication forwarding number and conditions with URI support +CCFCU . 93g37.36 Message waiting indication control +CMWI . 94g37.37 Session start and stop for smart congestion mitigation +CSCM 95g37.38 Power Saving Mode Setting +CPSMS . 96g37.39 Application Start and Stop indicatio
29、n for ACDC +CACDC 98g37.40 Informative examples . 98g38 Mobile termination control and status commands 100g38.0 General . 100g38.1 Phone activity status +CPAS 101g38.2 Set phone functionality +CFUN . 102g38.3 Enter PIN +CPIN . 103g38.4 Battery charge +CBC . 105g38.5 Signal quality +CSQ . 105g38.6 Mo
30、bile termination control mode +CMEC 106g38.7 Keypad control +CKPD . 107g38.8 Display control +CDIS . 108g38.9 Indicator control +CIND 109g38.10 Mobile termination event reporting +CMER . 110g3ETSI ETSI TS 127 007 V13.4.0 (2016-04)53GPP TS 27.007 version 13.4.0 Release 138.11 Select phonebook memory
31、storage +CPBS 113g38.12 Read phonebook entries +CPBR 114g38.13 Find phonebook entries +CPBF . 115g38.14 Write phonebook entry +CPBW 118g38.15 Clock +CCLK 119g38.16 Alarm +CALA 120g38.17 Generic SIM access +CSIM . 121g38.18 Restricted SIM access +CRSM 122g38.19 Secure control command +CSCC . 123g38.2
32、0 Alert sound mode +CALM . 124g38.21 Ringer sound level +CRSL . 124g38.22 Vibrator mode +CVIB 125g38.23 Loudspeaker volume level +CLVL 126g38.24 Mute control +CMUT 126g38.25 Accumulated call meter +CACM . 127g38.26 Accumulated call meter maximum +CAMM . 127g38.27 Price per unit and currency table +C
33、PUC 128g38.28 Call meter maximum event +CCWE 128g38.29 Power class +CPWC 129g38.30 Set language +CLAN . 130g38.31 Language event +CLAE . 131g38.32 Set greeting text +CSGT 131g38.33 Set voice mail number +CSVM . 132g38.34 Ring melody control +CRMC 133g38.35 Ring melody playback +CRMP 134g38.36 Master
34、 reset +CMAR . 134g38.37 List all available AT commands +CLAC . 135g38.38 Delete alarm +CALD . 135g38.39 Postpone or dismiss an alarm +CAPD . 136g38.40 Automatic time zone update +CTZU . 136g38.41 Time zone reporting +CTZR 137g38.42 Enter protocol mode+CPROT 138g38.43 Generic UICC logical channel ac
35、cess +CGLA 139g38.44 Restricted UICC logical channel access +CRLA . 140g38.45 Open logical channel +CCHO 142g38.46 Close logical channel +CCHC 142g38.47 EAP authentication +CEAP . 143g38.48 EAP retrieve parameters +CERP 145g38.49 UICC application discovery +CUAD . 145g38.50 Mobile originated locatio
36、n request +CMOLR 146g38.51 Backlight +CBKLT 150g38.52 Command touch screen action +CTSA 151g38.53 Command screen orientation +CSO . 153g38.54 Command screen size +CSS . 155g38.54A Command display screen boundary +CDSB 156g38.55 Positioning control +CPOS 156g38.56 Positioning reporting +CPOSR 172g38.
37、57 Mobile terminated location request notification +CMTLR 173g38.58 Mobile terminated location request disclosure allowance +CMTLRA 175g38.59 Battery capacity +CBCAP 175g38.60 Battery connection status +CBCON . 176g38.61 Battery charger status +CBCHG 177g38.62 Printing IP address format +CGPIAF . 17
38、7g38.63 IMS single radio voice call continuity +CISRVCC . 179g38.64 IMS network reporting +CIREP . 179g38.65 Remaining PIN retries +CPINR . 180g38.66 Set card slot +CSUS . 181g38.67 Emergency numbers +CEN 182g38.68 Availability for voice calls with IMS +CAVIMS. 183g38.69 Extended signal quality +CES
39、Q . 183g38.70 Primary notification event reporting +CPNER 185g38.71 IMS registration information +CIREG . 186g3ETSI ETSI TS 127 007 V13.4.0 (2016-04)63GPP TS 27.007 version 13.4.0 Release 138.72 Availability for SMS using IMS +CASIMS. 187g38.73 Monitor of current calls +CMCCS . 188g38.74 List of cur
40、rent calls +CLCCS . 194g38.75 Supported radio accesses +CSRA 197g38.76 Circuit switched fallback +CCSFB 199g38.77 Informative examples . 200g39 Mobile termination errors . 204g39.1 Report mobile termination error +CMEE . 204g39.1A Report mobile originated location request error +CMOLRE . 204g39.1B R
41、eport network error codes +CNEC 205g39.2 Mobile termination error result code +CME ERROR 206g39.2.0 General 206g39.2.1 General errors . 207g39.2.2 GPRS and EPS-related errors . 208g39.2.2.1 Errors related to a failure to perform an attach 208g39.2.2.2 Errors related to a failure to activate a contex
42、t 208g39.2.2.3 Errors related to a failure to disconnect a PDN . 209g39.2.2.4 Other GPRS errors 209g39.2.3 VBS, VGCS and eMLPP-related errors 209g39.3 Mobile termination error result code +CMOLRE 209g39.3.1 General 209g39.3.2 Errors 210g39.4 Informative examples . 210g310 Commands for packet domain
43、210g310.0 General . 210g310.1 Commands specific to MTs supporting the packet domain 211g310.1.0 General remark about EPS bearer contexts and PDP contexts . 211g310.1.1 Define PDP context +CGDCONT 212g310.1.2 Define secondary PDP context +CGDSCONT . 216g310.1.3 Traffic flow template +CGTFT 218g310.1.
44、4 Quality of service profile (requested) +CGQREQ 221g310.1.5 Quality of service profile (minimum acceptable) +CGQMIN 223g310.1.6 3G quality of service profile (requested) +CGEQREQ 224g310.1.7 3G quality of service profile (minimum acceptable) +CGEQMIN . 227g310.1.8 3G quality of service profile (neg
45、otiated) +CGEQNEG . 231g310.1.9 PS attach or detach +CGATT . 233g310.1.10 PDP context activate or deactivate +CGACT . 233g310.1.11 PDP context modify +CGCMOD . 234g310.1.12 Enter data state +CGDATA 235g310.1.13 Configure local octet stream PAD parameters +CGCLOSP (Obsolete) . 237g310.1.14 Show PDP a
46、ddress(es) +CGPADDR 237g310.1.15 Automatic response to a network request for PDP context activation +CGAUTO 238g310.1.16 Manual response to a network request for PDP context activation +CGANS 239g310.1.17 GPRS mobile station class +CGCLASS . 240g310.1.18 Configure local triple-X PAD parameters +CGCL
47、PAD (GPRS only) (Obsolete) . 241g310.1.19 Packet domain event reporting +CGEREP . 241g310.1.20 GPRS network registration status +CGREG 245g310.1.21 Select service for MO SMS messages +CGSMS 248g310.1.22 EPS network registration status +CEREG 248g310.1.23 PDP context read dynamic parameters +CGCONTRD
48、P 251g310.1.24 Secondary PDP context read dynamic parameters +CGSCONTRDP 253g310.1.25 Traffic flow template read dynamic parameters +CGTFTRDP 254g310.1.26 Define EPS quality of service +CGEQOS 256g310.1.27 EPS quality of service read dynamic parameters +CGEQOSRDP . 257g310.1.28 UE modes of operation
49、 for EPS +CEMODE 258g310.1.29 Delete non-active PDP contexts +CGDEL . 259g310.1.30 Signalling connection status +CSCON . 259g310.1.31 Define PDP context authentication parameters +CGAUTH . 261g310.1.32 Initial PDP context activation +CIPCA 262g310.1.33 No more PS data +CNMPSD 262g3ETSI ETSI TS 127 007 V13.4.0 (2016-04)73GPP TS 27.007 version 13.4.0 Release 1310.1.34 UEs usage setting for EPS +CEUS 263g310.1.35 UEs Voice Domain Preference E-UTRAN +CEVDP 263g310.1.36 UEs Voice Domain Preference UTRAN +CVDP 264g310.1.37 UEs Mobility Management IMS Voice Termina
