1、 ETSI TS 128 304 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP); Requirements (3GPP TS 28.304 versi
2、on 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 128 304 V15.0.0 (2018-07)13GPP TS 28.304 version 15.0.0 Release 15Reference RTS/TSGS-0528304vf00 Keywords 5G,GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Sire
3、t N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. Th
4、e content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portabl
5、e Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.e
6、tsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or
7、 mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights
8、 reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members.
9、 GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 128 304 V15.0.0 (2018-07)23GPP TS 28.304 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to E
10、TSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is avail
11、able from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 0
12、00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which
13、 are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This
14、 Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspondin
15、g ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are
16、 to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 128 304 V15.0.0 (2018-07)33GPP TS 28.304 version 15.0.0 Release 15Con
17、tents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Concepts and background 6g34.1 General . 6g34.2 Architecture 7g34.3 Functionality .
18、 8g35 Business level requirements . 8g35.1 Requirements 8g35.2 Actor roles 9g35.3 Telecommunication resources 9g35.4 High-level use cases . 10g35.4.1 Use case: Managing the monitoring of PEE parameters . 10g35.4.2 Use case: Controlling PEE related parameters 10g35.4.3 Use case: Supervising PEE relat
19、ed alarms 11g35.4.4 Use case: Monitoring PEE related configuration changes 11g36 Specification level requirements 11g36.1 Requirements 11g36.1.1 Requirements for solution 1 11g36.1.2 Requirements for solution 2 12g36.2 Actor roles 12g36.2.1 Actor roles for solution 1 12g36.2.2 Actor roles for soluti
20、on 2 12g36.3 Telecommunication resources 12g36.3.1 Telecommunication resources for solution 1 12g36.3.2 Telecommunication resources for solution 2 12g36.4 Use cases 13g36.4.1 Use cases for solution 1 13g36.4.1.1 Use case: Initiating PEE performance management job . 13g36.4.1.2 Use case: Controlling
21、PEE related threshold 13g36.4.1.3 Use case: Supervising PEE related alarms 13g36.4.1.4 Use case: Monitoring PEE related configuration changes 13g36.4.2 Use cases for solution 2 13g3Annex A (informative): Change history . 14g3History 15g3ETSI ETSI TS 128 304 V15.0.0 (2018-07)43GPP TS 28.304 version 1
22、5.0.0 Release 15Foreword This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present
23、 document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change
24、 control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the
25、 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 28.304 Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP); Requirements 28.305 Control and monit
26、oring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP): Information Service (IS) 28.306 Control and monitoring of Power, Energy and Environmental (PEE) parameters Integration Reference Point (IRP); Solution Set (SS) definitions ETSI ETSI TS 128 304 V15.0.0 (2018-
27、07)53GPP TS 28.304 version 15.0.0 Release 151 Scope The present document specifies the requirements for the control and monitoring of Power, Energy and Environmental (PEE) parameters in the following types of Radio Access Networks (RAN): GSM, UTRAN and E-UTRAN. 2 References The following documents c
28、ontain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a n
29、on-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifica
30、tions“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3 ETSI ES 202 336-12 (V1.1.1) (2015-06): “Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power, cooling and building environment systems used in telecommu
31、nication networks); Part 12: ICT equipment power, energy and environmental parameters monitoring information model“. 4 ETSI ES 202 336-1 (V1.1.2) (2008-09): “ Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment System
32、s used in Telecommunication Networks) Part 1: Generic Interface“. 5 3GPP TS 32.601: “Telecommunication management; Configuration Management (CM); Basic CM Integration Reference Point (IRP); Requirements“. 6 3GPP TS 32.411: “Telecommunication management; Performance Management (PM) Integration Refere
33、nce Point (IRP): Requirements“. 7 3GPP TS 32.111-1: “Telecommunication management; Fault Management; Part 1: 3G fault management requirements“. 8 3GPP TS 32.611: “Telecommunication management; Configuration Management (CM); Bulk CM Integration Reference Point (IRP): Requirements“. 9 3GPP TS 32.301:
34、“Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP); Requirements“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term d
35、efined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. Remote Management Server: Application which controls and monitors power, energy and environmental parameters of Radio Access Networks. Network Management layer Remote Management Server:
36、 Remote Management Server which operates at the NM layer. ETSI ETSI TS 128 304 V15.0.0 (2018-07)63GPP TS 28.304 version 15.0.0 Release 15Vendor-Specific Remote Management Server: Remote Management Server which operates at the DM layer. XCU: Defined in ETSI ES 202 336-12 3. DGU: Defined in ETSI ES 20
37、2 336-12 3. NOTE: The concept of Remote Management Server is introduced in ETSI ES 202 336-12 3 Figure 1 (Principles of the monitoring of ICT equipment power, energy and environment parameters). 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 a
38、nd the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. CU Control Unit DGU Data Gathering Unit NM-RMS Network Management layer RMS PEE Power, Energy and Environmental RMS Remote Management Se
39、rver VS-RMS Vendor-Specific RMS XCU XML enabled CU 4 Concepts and background 4.1 General With regard to the control and monitoring of their Power, Energy and Environmental (PEE) parameters, base stations can be of two different types: # either they have built-in sensors, which communicate with DM th
40、rough Type-1 interface. In turn, DM communicates with the NM-RMS (see figure 4.1.1); # or they have external sensors, which communicate with the NM-RMS via: - either XCU/DGU (see figure 4.1.1) - or vendor-specific RMS (VS RMS) (see figure 4.1.1). The NM-RMS collects PEE parameters from part or whole
41、 of the radio access network and may also control PEE related parameters through either DM(s) and/or XCU/DGU(s) and/or VS-RMS(s). For this reason, it is beneficial to standardize the interface to control and monitor PEE parameters between the NM-RMS on the one hand and DM, XCU/DGU and VS-RMS on the
42、other hand. This TS series specifies this Type-2 interface (see TS 32.101 2). ETSI ETSI TS 128 304 V15.0.0 (2018-07)73GPP TS 28.304 version 15.0.0 Release 15Figure 4.1.1: Overall architecture for the control and monitoring of PEE parameters 4.2 Architecture The NM-RMS is a located in the NM layer (s
43、ee also TS 32.101 2). VS-RMS is located in the DM layer (see also TS 32.101 2). XCU/DGU is located in the Network Element layer (see also TS 32.101 2). Possible interfaces between all these entities are depicted in figure 4.1.1. The three possible scenarios for this IRP are depicted in figures 4.2.1
44、, 4.2.2 and 4.2.3. Figure 4.2.1: NM-RMS to XCU/DGU Type-2 interface Figure 4.2.2: NM-RMS to VS-RMS Type-2 interface ETSI ETSI TS 128 304 V15.0.0 (2018-07)83GPP TS 28.304 version 15.0.0 Release 15Figure 4.2.3: NM-RMS to EM/DM Type-2 interface 4.3 Functionality Both DM, XCU/DGU and VS-RMS offer a capa
45、bility allowing the NM-RMS to control and monitor PEE parameters of one or more base stations. This TS series specifies the information model exposed by the DM, XCU/DGU and VS-RMS to the NM-RMS, and the operations enabling the control and monitoring of PEE parameters from the NM-RMS. This TS series
46、describes two non-mutually exclusive solutions: # Solution 1: based on existing 3GPP Interface IRPs to support controlling and monitoring of PEE parameters of base stations with built-in sensors. This solution may be used for the interface between DM and NM-RMS. # Solution 2: describing simplified f
47、unctionalities according to ETSI ES 202 336-1 4 and ES 202 336-12 3. This solution may be used for the interfaces between XCU/DGU and NM-RMS, between VS-RMS and NM-RMS and between DM and NM-RMS. Solution 1 is only applicable in case of scenario depicted in figure 4.2.3. Solution 2 is applicable in c
48、ase of all scenarios depicted by figures 4.2.1, 4.2.2 and 4.2.3. 5 Business level requirements 5.1 Requirements NOTE 1: The next three business level requirements relate to the capability for the NM-RMS to initiate / stop the retrieval of power, energy and environmental parameters of selected base s
49、tations. REQ-EECMON-CON-001: The DM shall support a capability allowing the NM-RMS to initiate / stop the retrieval of power, energy and environmental parameters of selected base stations. REQ-EECMON-CON-002: The XCU/DGU shall support a capability allowing the NM-RMS to initiate / stop the retrieval of power, energy and environmental parameters of selected base stations. REQ-EECMON-CON-003: The VS-RMS shall support a capability allowing the NM-RMS to initiate / stop the retrieval of power, energy and environmental parameters of sel
