1、 ETSI TS 128 625 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; State management data definition Integration Reference Point (IRP); Information Service (IS) (3GPP TS 28.625 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 128 62
2、5 V14.0.0 (2017-04)13GPP TS 28.625 version 14.0.0 Release 14Reference RTS/TSGS-0528625ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistr
3、e la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present documen
4、t shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within
5、ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present
6、document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized b
7、y written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTST
8、M, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ET
9、SI ETSI TS 128 625 V14.0.0 (2017-04)23GPP TS 28.625 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members
10、 and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.or
11、g/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pr
12、esent document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being r
13、eferences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will
14、 not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 128 625 V14.0.0 (2017-04)33GPP TS 28.625
15、 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Model . 6g34.1 Information entities imported and local
16、 labels . 6g34.2 Class diagram . 6g34.2.1 Relationships. 6g34.2.2 Inheritance 6g34.3 Class definitions . 7g34.3.1 StateManagementEntity 7g34.3.1.1 Definition 7g34.3.1.2 Attributes . 7g34.3.1.3 Attribute constraints 7g34.4 Attribute definitions . 7g34.4.1 Attribute properties . 7g3Annex A (informativ
17、e): Change history . 10g3History 11g3ETSI ETSI TS 128 625 V14.0.0 (2017-04)43GPP TS 28.625 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within
18、 the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for
19、 information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have
20、been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 28.624 State Management Data Definition Integratio
21、n Reference Point (IRP); Requirements; 28.625 State Management Data Definition Integration Reference Point (IRP); Information Service (IS) ; 28.626 State Management Data Definition Integration Reference Point (IRP); Solution Set (SS) definitions. This specification is part of a set that has been dev
22、eloped for converged management solutions. ETSI ETSI TS 128 625 V14.0.0 (2017-04)53GPP TS 28.625 version 14.0.0 Release 141 Scope The present document specifies the State Management Data Definition IRP Information Service that can be communicated between an IRPAgent and an IRPManager for telecommuni
23、cation network management purposes, including management of converged networks. The present document specifies the semantics and behaviour of information object class attributes and relations visible across the reference point in a protocol and technology neutral way. It does not define their syntax
24、 and encoding. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific re
25、ference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present docum
26、ent. 1 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 2 3GPP TS 32.102: “Telecommunication management; Architecture“. 3 3GPP TS 32.300: “Telecommunication management; Configuration Management (CM); Name convention for Managed Objects“. 4 3GPP TS 32.302: “Tele
27、communication management; Configuration Management (CM); Notification Integration Reference Point (IRP): Information Service (IS)“. 5 3GPP TS 32.312: “Telecommunication management; Generic Integration Reference Point (IRP) management; Information Service (IS)“. 6 3GPP TS 32.600: “Telecommunication m
28、anagement; Configuration Management (CM); Concept and high-level requirements“. 7 ITU-T Recommendation X.731: “Information technology - Open Systems Interconnection - Systems Management: State management function“. 8 ITU-T Recommendation X.733: “Information technology - Open Systems Interconnection
29、- Systems Management: Alarm reporting function“. 9 3GPP TS 32.111-2: “Telecommunication management; Fault Management; Part 2: Alarm Integration Reference Point (IRP): Information Service (IS)“. 10 3GPP TS 32.662: “Telecommunication management; Configuration Management (CM); Kernel CM Information Ser
30、vice (IS)“. ETSI ETSI TS 128 625 V14.0.0 (2017-04)63GPP TS 28.625 version 14.0.0 Release 143 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 32.101 1, 3GPP TS 32.102 2 and 3GPP TS 32.600 6 apply. 3.2 Abbreviations For
31、 the purposes of the present document, the following abbreviations apply: CM Configuration Management EM Element Manager IOC Information Object Class IRP Integration Reference Point IS Information Service (see 3GPP TS 32.101 1) M Mandatory NE Network Element NM Network ManagerNR Network Resource O O
32、ptional OMG Object Management Group OS Operations System QoS Quality of Service UML Unified Modelling Language (OMG) 4 Model 4.1 Information entities imported and local labels Label reference Local label 4.2 Class diagram 4.2.1 Relationships There is no relationship. 4.2.2 Inheritance There are no i
33、nheritance relationships. ETSI ETSI TS 128 625 V14.0.0 (2017-04)73GPP TS 28.625 version 14.0.0 Release 144.3 Class definitions 4.3.1 StateManagementEntity 4.3.1.1 Definition StateManagementEntity is an Archetype, that may represent any IOC defined in the Network Resource Models, e.g. Generic Network
34、 Resource Model, Core Network Resource Model, UTRAN Network Resource Model or GERAN Network Resource Model. The attributes defined for this Archetype can be imported and used in any IOC of the Network Resource Models, where such attributes are needed. These attributes shall be used in the same way a
35、s defined in the ITU-T Recommendation X.731 7 and ITU-T Recommendation X.733 8, unless otherwise stated. That document gives also examples of state diagrams, defining possible state transitions when one or more of the state attributes defined here are used in a class. 4.3.1.2 Attributes The followin
36、g attributes are defined for this Archetype. Attribute Name operationalState usageState administrativeState alarmStatus proceduralStatus availabilityStatus controlStatus standbyStatus unknownStatus 4.3.1.3 Attribute constraints None. 4.4 Attribute definitions 4.4.1 Attribute properties The following
37、 table gives the definition and legal values for each attribute. ETSI ETSI TS 128 625 V14.0.0 (2017-04)83GPP TS 28.625 version 14.0.0 Release 14Attribute Name Documentation and Allowed Values Properties operationalState It indicates the operational state of the object instance. “It describes whether
38、 or not the resource is physically installed and working.“ 7 This attribute is READ-ONLY. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Enabled”, “Disabled” . type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False u
39、sageState It indicates the usage state of the object instance. “It describes whether or not the resource is actively in use at a specific instant, and if so, whether or not it has spare capacity for additional users at that instant.“ 7 This attribute is READ-ONLY. The meaning of these values is as d
40、efined in ITU-T Recommendation X.731 7. allowedValues: “Idle“, “Active“, “Busy“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False administrativeState It indicates the administrative state of the object instance. “It describes the permission to use or pro
41、hibition against using the resource, imposed through the management services.“ 7 The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Locked“, “Shutting down“, “Unlocked“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: F
42、alse alarmStatus It indicates the alarm status of the object instance. This is mapped to the perceived severity of the most severe active alarm associated to the object instance. The meaning of these values is as defined for the attribute perceived severity in ITU-T Recommendation X.733 8. allowedVa
43、lues: “Cleared“, “Indeterminate“, “Warning“, “Minor“, “Major“, “Critical“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False proceduralStatus It indicates the procedural status of the object instance. The meaning of these values is as defined in ITU-T Rec
44、ommendation X.731 7. allowedValues: “Initialisation required“, “Not initialised“, “Initialising“, “Reporting“, “Terminating“. The meaning of NULL value is the same as “empty set“ defined in ITU-T Recommendation X.731 7: “If the value of this attribute is an empty set the managed object is ready, for
45、 example, the initialization is complete”. type: String multiplicity: 1* isOrdered: False isUnique: True defaultValue: None isNullable: True availabilityStatus It indicates the availability status of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allo
46、wedValues: “In test“, “Failed“, “Power off“, “Off line“, “Off duty“, “Dependency“, “Degraded“, “Not installed“, “Log full“. type: String multiplicity: 1* isOrdered: False isUnique: True defaultValue: None isNullable: True controlStatus It indicates the control status of the object instance. The mean
47、ing of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Subject to test“, “Part of services locked“, “Reserved for test“, “Suspended“. type: String multiplicity: 1* isOrdered: False isUnique: True defaultValue: None isNullable: True standbyStatus It indicates the standby s
48、tatus of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Hot standby“, “Cold standby“, “Providing service“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False ETSI ETSI TS 128 625 V14.0.0 (201
49、7-04)93GPP TS 28.625 version 14.0.0 Release 14Attribute Name Documentation and Allowed Values Properties unknownStatus It indicates whether the state of the resource represented by the managed object is unknown. “True“ (state is unknown, the values of the state attributes may not reflect the actual state of the resource); “False“ (state is known, the values of the state attributes reflect the actual state of the resource). allowedValues: “True“, “False“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultVa
