1、 ETSI TS 128 625 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; State management data definition Integration Reference Point (IRP); Information Service (IS) (3GPP TS 28.625 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 128 62
2、5 V15.0.0 (2018-07)13GPP TS 28.625 version 15.0.0 Release 15Reference RTS/TSGS-0528625vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistr
3、e la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present documen
4、t shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within
5、ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present
6、document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized b
7、y written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks o
8、f ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Asso
9、ciation. ETSI ETSI TS 128 625 V15.0.0 (2018-07)23GPP TS 28.625 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publ
10、icly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI
11、 Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or
12、may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to us
13、e or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation P
14、artnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETS
15、I identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules
16、 (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 128 625 V15.0.0 (2018-07)33GPP TS 28.625 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminol
17、ogy 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Model . 6g34.1 Information entities imported and local labels . 6g34.2 Class diagram . 6g34.2.1 Relationships. 6g34.2.2 Inheritance 6g34.3 Class definition
18、s . 6g34.3.1 StateManagementEntity 6g34.3.1.1 Definition 6g34.3.1.2 Attributes . 6g34.3.1.3 Attribute constraints 7g34.4 Attribute definitions . 7g34.4.1 Attribute properties . 7g3Annex A (informative): Change history . 10g3History 11g3ETSI ETSI TS 128 625 V15.0.0 (2018-07)43GPP TS 28.625 version 15
19、.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the pres
20、ent document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under cha
21、nge control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering
22、the 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 28.624 State Management Data Definition Integration Reference Point (IRP); Requirements; 28.625 State Management Data Definition Integration Reference
23、Point (IRP); Information Service (IS) ; 28.626 State Management Data Definition Integration Reference Point (IRP); Solution Set (SS) definitions. This specification is part of a set that has been developed for converged management solutions. ETSI ETSI TS 128 625 V15.0.0 (2018-07)53GPP TS 28.625 vers
24、ion 15.0.0 Release 151 Scope The present document specifies the State Management Data Definition IRP Information Service that can be communicated between an IRPAgent and an IRPManager for telecommunication network management purposes, including management of converged networks. The present document
25、specifies the semantics and behaviour of information object class attributes and relations visible across the reference point in a protocol and technology neutral way. It does not define their syntax and encoding. 2 References The following documents contain provisions which, through reference in th
26、is text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applie
27、s. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 2 3GPP
28、 TS 32.102: “Telecommunication management; Architecture“. 3 3GPP TS 32.300: “Telecommunication management; Configuration Management (CM); Name convention for Managed Objects“. 4 3GPP TS 32.302: “Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IR
29、P): Information Service (IS)“. 5 3GPP TS 32.312: “Telecommunication management; Generic Integration Reference Point (IRP) management; Information Service (IS)“. 6 3GPP TS 32.600: “Telecommunication management; Configuration Management (CM); Concept and high-level requirements“. 7 ITU-T Recommendatio
30、n X.731: “Information technology - Open Systems Interconnection - Systems Management: State management function“. 8 ITU-T Recommendation X.733: “Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function“. 9 3GPP TS 32.111-2: “Telecommunication management; F
31、ault Management; Part 2: Alarm Integration Reference Point (IRP): Information Service (IS)“. 10 3GPP TS 32.662: “Telecommunication management; Configuration Management (CM); Kernel CM Information Service (IS)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document,
32、 the terms and definitions given in 3GPP TS 32.101 1, 3GPP TS 32.102 2 and 3GPP TS 32.600 6 apply. ETSI ETSI TS 128 625 V15.0.0 (2018-07)63GPP TS 28.625 version 15.0.0 Release 153.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CM Configuration Management
33、 EM Element Manager IOC Information Object Class IRP Integration Reference Point IS Information Service (see 3GPP TS 32.101 1) M Mandatory NE Network Element NM Network ManagerNR Network Resource O OptionalOMG Object Management Group OS Operations System QoS Quality of Service UML Unified Modelling
34、Language (OMG) 4 Model 4.1 Information entities imported and local labels Label reference Local label 4.2 Class diagram 4.2.1 Relationships There is no relationship. 4.2.2 Inheritance There are no inheritance relationships. 4.3 Class definitions 4.3.1 StateManagementEntity 4.3.1.1 Definition StateMa
35、nagementEntity is an Archetype, that may represent any IOC defined in the Network Resource Models, e.g. Generic Network Resource Model, Core Network Resource Model, UTRAN Network Resource Model or GERAN Network Resource Model. The attributes defined for this Archetype can be imported and used in any
36、 IOC of the Network Resource Models, where such attributes are needed. These attributes shall be used in the same way as defined in the ITU-T Recommendation X.731 7 and ITU-T Recommendation X.733 8, unless otherwise stated. That document gives also examples of state diagrams, defining possible state
37、 transitions when one or more of the state attributes defined here are used in a class. 4.3.1.2 Attributes The following attributes are defined for this Archetype. ETSI ETSI TS 128 625 V15.0.0 (2018-07)73GPP TS 28.625 version 15.0.0 Release 15Attribute Name operationalState usageState administrative
38、State alarmStatus proceduralStatus availabilityStatus controlStatus standbyStatus unknownStatus 4.3.1.3 Attribute constraints None. 4.4 Attribute definitions 4.4.1 Attribute properties The following table gives the definition and legal values for each attribute. ETSI ETSI TS 128 625 V15.0.0 (2018-07
39、)83GPP TS 28.625 version 15.0.0 Release 15Attribute Name Documentation and Allowed Values Properties operationalState It indicates the operational state of the object instance. “It describes whether or not the resource is physically installed and working.“ 7 This attribute is READ-ONLY. The meaning
40、of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Enabled”, “Disabled” . type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False usageState It indicates the usage state of the object instance. “It describes whether or not the resour
41、ce is actively in use at a specific instant, and if so, whether or not it has spare capacity for additional users at that instant.“ 7 This attribute is READ-ONLY. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Idle“, “Active“, “Busy“. type: String multipli
42、city: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False administrativeState It indicates the administrative state of the object instance. “It describes the permission to use or prohibition against using the resource, imposed through the management services.“ 7 The meaning of these
43、values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Locked“, “Shutting down“, “Unlocked“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False alarmStatus It indicates the alarm status of the object instance. This is mapped to the perceived
44、 severity of the most severe active alarm associated to the object instance. The meaning of these values is as defined for the attribute perceived severity in ITU-T Recommendation X.733 8. allowedValues: “Cleared“, “Indeterminate“, “Warning“, “Minor“, “Major“, “Critical“. type: String multiplicity:
45、1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False proceduralStatus It indicates the procedural status of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Initialisation required“, “Not initialised“, “Initialising“, “Rep
46、orting“, “Terminating“. The meaning of NULL value is the same as “empty set“ defined in ITU-T Recommendation X.731 7: “If the value of this attribute is an empty set the managed object is ready, for example, the initialization is complete”. type: String multiplicity: 1* isOrdered: False isUnique: Tr
47、ue defaultValue: None isNullable: True availabilityStatus It indicates the availability status of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “In test“, “Failed“, “Power off“, “Off line“, “Off duty“, “Dependency“, “Degraded“, “Not in
48、stalled“, “Log full“. type: String multiplicity: 1* isOrdered: False isUnique: True defaultValue: None isNullable: True controlStatus It indicates the control status of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Subject to test“, “
49、Part of services locked“, “Reserved for test“, “Suspended“. type: String multiplicity: 1* isOrdered: False isUnique: True defaultValue: None isNullable: True standbyStatus It indicates the standby status of the object instance. The meaning of these values is as defined in ITU-T Recommendation X.731 7. allowedValues: “Hot standby“, “Cold standby“, “Providing service“. type: String multiplicity: 1 isOrdered: N/A isUnique: N/A defaultValue: None isNullable: False ETSI ETSI TS 128 625 V15.0.0 (2018-07)93GPP TS 28.625 version
