ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf

上传人:roleaisle130 文档编号:742338 上传时间:2019-01-11 格式:PDF 页数:31 大小:165.25KB
下载 相关 举报
ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf_第1页
第1页 / 共31页
ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf_第2页
第2页 / 共31页
ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf_第3页
第3页 / 共31页
ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf_第4页
第4页 / 共31页
ETSI TS 129 011-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Signalling Interworking for supplementary ser.pdf_第5页
第5页 / 共31页
点击查看更多>>
资源描述

1、 ETSI TS 129 011 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Signalling Interworking for supplementary services (3GPP TS 29.011 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 129 011 V15.0.0 (

2、2018-07)13GPP TS 29.011 version 15.0.0 Release 15Reference RTS/TSGC-0429011vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la So

3、us-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall

4、 not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Se

5、cretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present documen

6、t, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by writt

7、en permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI

8、registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association

9、. ETSI ETSI TS 129 011 V15.0.0 (2018-07)23GPP TS 29.011 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly av

10、ailable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web se

11、rver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may bec

12、ome, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or re

13、produce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partners

14、hip Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI ident

15、ities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verba

16、l forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 011 V15.0.0 (2018-07)33GPP TS 29.011 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3

17、Foreword . 5g31 Scope 6g31.1 Normative references . 6g31.2 Definitions and abbreviations . 7g32 Introduction 7g32.1 MSC/VLR procedures for handling supplementary service signalling received over the A-interface . 7g32.2 MSC/VLR procedures for handling supplementary service signalling received over t

18、he D-interface . 8g33 SS version negotiation 8g33.1 Call related supplementary services interworking 8g33.2 Call independent supplementary services interworking . 8g34 Mapping between TC transaction sublayer messages and layer 3 radio path messages 9g34.1 D-interface to A-interface mapping 9g34.2 A-

19、interface to D-interface mapping 9g34.3 Procedures 9g35 Call related supplementary services management 10g35.1 SS management in connection establishment phase . 10g35.1.1 Line Identification services . 10g35.1.1.1 Calling Line Identification Presentation (CLIP) . 10g35.1.1.2 Calling Line Identificat

20、ion Restriction (CLIR) . 11g35.1.1.3 Connected Line Identification Presentation (COLP) 11g35.1.1.4 Connected Line Identification Restriction (COLR) 11g35.1.2 Call Forwarding services 12g35.1.2.1 Notification to served mobile subscriber. 12g35.1.3 Call Waiting service (CW) . 12g35.1.3.1 Offering a wa

21、iting call 12g35.1.3.2 Notification of waiting call to calling subscriber 12g35.1.4 Closed User Group service (CUG) . 13g35.1.4.1 Explicit invocation of a CUG call . 13g35.1.4.2 Notification of CUG invocation to served MS 13g35.1.4.3 Notification of rejection of CUG invocation to served MS . 13g35.1

22、.4.4 Notification of CUG invocation to terminating MS 15g35.1.5 Advice of Charge services 15g35.1.5.1 Notification of Charging information to served MS, mobile originated call. 15g35.1.5.2 Notification of Charging information to served MS, mobile terminated call 15g35.1.6 Call Barring services . 16g

23、35.1.6.1 Barring of outgoing calls . 16g35.1.6.2 Barring of incoming calls 16g35.1.7 CCBS call outcome . 17g35.2 SS Management in stable connection state . 17g35.2.1 Call Forwarding services 18g35.2.1.1 Notification of invocation of CFB to served mobile subscriber 18g35.2.2 Call Hold service (HOLD)

24、18g35.2.3 Multi Party service (MPTY) . 19g35.2.4 Advice of Charge services 19g35.2.5 Explicit Call Transfer service (ECT) 20g35.3 SS Management in disconnecting phase 20g35.3.1 Call Forwarding services 21g35.3.2 CCBS Request Activation 21g35.3.3 Call Deflection service 22g35.3.3.1 Call Deflection Op

25、eration Request . 22g35.3.3.2 Call Deflection Operation Response . 22g3ETSI ETSI TS 129 011 V15.0.0 (2018-07)43GPP TS 29.011 version 15.0.0 Release 156 Call independent supplementary services management . 23g36.1 MS initiated SS Management . 23g36.1.1 Connection establishment phase . 23g36.1.2 Conne

26、ction established . 23g36.1.3 Connection release 24g36.2 Network initiated SS Management . 25g36.2.1 Connection establishment phase . 25g36.2.2 Connection established . 25g36.2.3 Connection release 25g36.2.4 ForwardCheckSSIndication 26g36.2.5 CCBS Recall . 26g36.2.6 CCBS Monitoring . 27g36.3 Mapping

27、 of Operation Codes, Error Codes, Parameter Tags and Parameter Contents 27g36.3.1 Operation codes 27g36.3.2 Error codes 27g36.3.3 Parameter tags and parameter values 28g3Annex A (informative): Change history . 29g3History 30g3ETSI ETSI TS 129 011 V15.0.0 (2018-07)53GPP TS 29.011 version 15.0.0 Relea

28、se 15Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identify

29、ing change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance

30、, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 129 011 V15.0.0 (2018-07)63GPP TS 29.011 version 15.0.0 Release 151 Scope The scope of this Technical Specification is to p

31、rovide a detailed specification for interworking between the A interface protocol and the Mobile Application Part for handling of supplementary services. The MAP interfaces of interest are the B-, C-, D- and E-interfaces. The A-, C-, D- and E-interfaces are physical interfaces while the B-interface

32、is an internal interface defined for modelling purposes. Information relating to the modelling interface is not normative in this specification. Supplementary service signalling may be passed by the MSC/VLR between the A- and E-interfaces after inter-MSC handover. This procedure is transparent as fa

33、r as supplementary services are concerned therefore interworking concerning this process is not described in this specification. Clause 2 describes general procedures for interworking between the A- and D- physical interfaces. Clause 3 describes the general procedures for the SS version negotiation.

34、 Clause 4 describes the mapping of layer 3 radio path messages with Transaction Capabilities (TC) transaction sublayer messages for interworking between the A- and D- physical interfaces. Clause 5 describes specific interworking procedures for all interfaces relating to call related SS activity. Cla

35、use 6 describes specific interworking procedures for all interfaces relating to call independent SS activity. Clause 6 also covers the interworking between the MAP User (see 3GPP TS 29.002) and the SS handling functions of the network entities (see 3GPP TS 24.010 and 3GPP TS 24.080). Reference is ma

36、de to the following Technical Specifications: - 3GPP TS 22.004 and 3GPP TS 22.08x and 3GPP TS 22.09x-series, for definition of supplementary services; - 3GPP TS 23.011, 3GPP TS 23.08x and 3GPP TS 23.09x-series, for technical realisation of supplementary services; - 3GPP TS 24.010, 3GPP TS 24.080, 3G

37、PP TS 24.08x and 3GPP TS 24.09x-series, for radio path signalling procedures for supplementary services; - 3GPP TS 29.002 (MAP). 1.1 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are

38、either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM documen

39、t), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.024: “Description of Charge Advice Informatio

40、n (CAI)“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.086: “Advice of Charge (AoC) supplementary services - Stage 1“. 6 3GPP TS 22.093: “Completion of Calls to Busy Subscriber - Stage 1“. ETSI ETSI TS 129 011 V15.0.0 (2018-07)73GPP TS 29.011 version 15.0.0

41、 Release 157 3GPP TS 23.011: “Technical realization of supplementary services“. 8 3GPP TS 23.086: “Advice of Charge (AoC) supplementary services - Stage 2“. 9 3GPP TS 23.093: “Completion of Calls to Busy Subscriber - Stage 2“. 10 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 11 3GP

42、P TS 24.010: “Mobile radio interface layer 3 Supplementary services specification General aspects“. 12 3GPP TS 24.072: “Call Deflection supplementary service - Stage 3“. 13 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification Formats and coding“. 14 3GPP TS 24.081: “L

43、ine identification supplementary services - Stage 3“. 15 3GPP TS 24.082: “Call Forwarding (CF) supplementary services - Stage 3“. 16 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 17 3GPP TS 24.084: “Multi Party (MPTY) supplementary services - Stage 3“. 18

44、 3GPP TS 24.085: “Closed User Group (CUG) supplementary services - Stage 3“. 19 3GPP TS 24.086: “Advice of Charge (AoC) supplementary services - Stage 3“. 20 3GPP TS 24.088: “Call Barring (CB) supplementary services - Stage 3“. 21 3GPP TS 24.090: “Unstructured supplementary services operation - Stag

45、e 3“. 22 3GPP TS 24.091: “Explicit Call Transfer (ECT) supplementary services - Stage 3“. 23 3GPP TS 24.093: “Completion of Calls to Busy Subscriber - Stage 3“. 24 3GPP TS 29.002: “Mobile Application Part (MAP) specification“. 25 3GPP TS 29.010: “Information element mapping between Mobile Station -

46、Base Station System and BSS - Mobile-services Switching Centre (MS - BSS - MSC) Signalling procedures and the Mobile Application Part (MAP)“. 26 3GPP TS 23.088: “Call Barring (CB) Supplementary Service; Stage 2“. 1.2 Definitions and abbreviations Abbreviations used in this specification are listed i

47、n 3GPP TR 21.905. 2 Introduction This clause describes general procedure at the MSC/VLR for SS interworking between the A- and D-interfaces. 2.1 MSC/VLR procedures for handling supplementary service signalling received over the A-interface Upon receipt of supplementary service signalling on the A-in

48、terface, the MSC/VLR shall: - perform any internal SS checks or procedures appropriate to the signal (see clauses 4 and 5); - if necessary request access to the HLR over the D-interface using the procedures defined in this specification and MAP, 3GPP TS 29.002; ETSI ETSI TS 129 011 V15.0.0 (2018-07)

49、83GPP TS 29.011 version 15.0.0 Release 15- use the version indicator received from the MS to set up the right AC context name towards the HLR (see clause 3). The version indicator is described in 3GPP TS 24.010 and 3GPP TS 24.080. AC names are defined in 3GPP TS 29.002; - perform mapping between layer 3 messages on the radio path and TC transaction sublayer messages as required (see clause 3). 2.2 MSC/VLR procedures for handling supplementary service signalling received over the D-interface Upon receipt of supplementary servi

展开阅读全文
相关资源
猜你喜欢
  • BS ISO 15930-1-2002 Graphic technology - Prepress digital data exchange - Use of PDF - Complete exchange using CMYK data (PDF X-1) and PDF X-1a)《图形技术 预压数字数据交换 格式的使用 使用CMYK 数据 (PDF .pdf BS ISO 15930-1-2002 Graphic technology - Prepress digital data exchange - Use of PDF - Complete exchange using CMYK data (PDF X-1) and PDF X-1a)《图形技术 预压数字数据交换 格式的使用 使用CMYK 数据 (PDF .pdf
  • BS ISO 15930-7-2010 Graphic technology - Prepress digital data exchange using PDF - Complete exchange of printing data (PDF X-4) and partial exchange of printing data with external.pdf BS ISO 15930-7-2010 Graphic technology - Prepress digital data exchange using PDF - Complete exchange of printing data (PDF X-4) and partial exchange of printing data with external.pdf
  • BS ISO 15930-8-2010 Graphic technology - Prepress digital data exchange using PDF - Partial exchange of printing data using PDF 1 6 (PDF X-5)《图形技术 用PDF格式进行预印数字数据交换 使用PDF1 6(PDF X-5.pdf BS ISO 15930-8-2010 Graphic technology - Prepress digital data exchange using PDF - Partial exchange of printing data using PDF 1 6 (PDF X-5)《图形技术 用PDF格式进行预印数字数据交换 使用PDF1 6(PDF X-5.pdf
  • BS ISO 15932-2013 Microbeam analysis Analytical electron microscopy Vocabulary《微束分析 分析电子显微术 词汇》.pdf BS ISO 15932-2013 Microbeam analysis Analytical electron microscopy Vocabulary《微束分析 分析电子显微术 词汇》.pdf
  • BS ISO 15967-2007 Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI)《直接还原铁 热压铁(HBI)翻转和磨损指数的测定》.pdf BS ISO 15967-2007 Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI)《直接还原铁 热压铁(HBI)翻转和磨损指数的测定》.pdf
  • BS ISO 15968-2016 Direct reduced iron Determination of apparent density and water absorption of hot briquetted iron (HBI)《直接还原铁 热压块铁 (HBI) 表观密度和吸水率的测定》.pdf BS ISO 15968-2016 Direct reduced iron Determination of apparent density and water absorption of hot briquetted iron (HBI)《直接还原铁 热压块铁 (HBI) 表观密度和吸水率的测定》.pdf
  • BS ISO 15987-2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films《塑料 薄膜和片材 双轴向取向聚酰胺(尼龙)薄膜》.pdf BS ISO 15987-2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films《塑料 薄膜和片材 双轴向取向聚酰胺(尼龙)薄膜》.pdf
  • BS ISO 15988-2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films《塑料 薄膜和片材 双轴向取向聚对苯二甲酸乙酯(PET)薄膜》.pdf BS ISO 15988-2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films《塑料 薄膜和片材 双轴向取向聚对苯二甲酸乙酯(PET)薄膜》.pdf
  • BS ISO 16000-13-2008 Indoor air - Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins dibenzofurans (e.pdf BS ISO 16000-13-2008 Indoor air - Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins dibenzofurans (e.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1