ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf

上传人:figureissue185 文档编号:742655 上传时间:2019-01-11 格式:PDF 页数:71 大小:343.93KB
下载 相关 举报
ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf_第1页
第1页 / 共71页
ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf_第2页
第2页 / 共71页
ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf_第3页
第3页 / 共71页
ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf_第4页
第4页 / 共71页
ETSI TS 129 336-2018 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf_第5页
第5页 / 共71页
点击查看更多>>
资源描述

1、 ETSI TS 129 336 V14.4.0 (2018-01) Universal Mobile Telecommunications System (UMTS); LTE; Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applications (3GPP TS 29.336 version 14.4.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 129 336 V14.4.0 (201

2、8-01)13GPP TS 29.336 version 14.4.0 Release 14Reference RTS/TSGC-0429336ve40 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfe

3、cture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be

4、 modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretari

5、at. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, plea

6、se send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written perm

7、ission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registe

8、red for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI

9、ETSI TS 129 336 V14.4.0 (2018-01)23GPP TS 29.336 version 14.4.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available f

10、or ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt

11、ps:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, esse

12、ntial to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce a

13、ny trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Proje

14、ct (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can

15、 be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms f

16、or the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 336 V14.4.0 (2018-01)33GPP TS 29.336 version 14.4.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword

17、. 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Abbreviations . 9g34 General Description 9g34.1 Introduction 9g35 Diameter-based S6m/S6n Interface 11g35.1 Introduction 11g35.2 Procedure Descriptions . 11g35.2.1 Subscriber Information Retrieval 11g35.2.1.1 General 11

18、g35.2.1.2 Detailed Behaviour of the HSS . 13g35.2.1.3 Detailed Behaviour of the MTC-IWF . 14g35.2.1.4 Detailed Behaviour of the MTC-AAA 14g36 Protocol Specification 15g36.1 Introduction 15g36.1.1 Use of Diameter Base Protocol . 15g36.1.2 Securing Diameter Messages 15g36.1.3 Accounting Functionality

19、. 15g36.1.4 Use of Sessions . 15g36.1.5 Transport Protocol 15g36.1.6 Routing Considerations . 15g36.1.7 Advertising Application Support 16g36.1.8 Diameter Application Identifier 16g36.1.9 Use of the Supported-Features AVP . 16g36.1.10 User Identity to HSS resolution 16g36.2 Commands 17g36.2.1 Introd

20、uction. 17g36.2.2 Command-Code values . 17g36.2.3 Subscriber-Information-Request (SIR) Command . 17g36.2.4 Subscriber-Information-Answer (SIA) Command 18g36.3 Result-Code AVP and Experimental-Result AVP Values . 18g36.3.1 General 18g36.3.2 Success 18g36.3.3 Permanent Failures . 18g36.3.3.1 DIAMETER_

21、ERROR_USER_UNKNOWN (5001) 18g36.3.3.2 DIAMETER_ERROR_UNAUTHORIZED_REQUESTING_ENTITY (5510) . 18g36.3.3.3 DIAMETER_ERROR_UNAUTHORIZED_SERVICE (5511) . 19g36.4 AVPs 19g36.4.1 General 19g36.4.2 User-Identifier . 20g36.4.3 Service-ID . 20g36.4.4 SCS-Identity . 20g36.4.5 Service-Parameters . 21g36.4.6 T4

22、-Parameters . 21g36.4.7 Service-Data . 21g36.4.8 T4-Data . 21g36.4.9 HSS-Cause 22g3ETSI ETSI TS 129 336 V14.4.0 (2018-01)43GPP TS 29.336 version 14.4.0 Release 146.4.10 SIR-Flags 22g36.4.11 External-Identifier . 22g36.4.12 Serving-Node 22g36.4.13 Additional-Serving-Node 23g36.4.14 IP-SM-GW-Number .

23、24g36.4.15 IP-SM-GW-Name . 24g36.4.16 OC-Supported-Features 24g36.4.17 OC-OLR . 24g36.4.18 IP-SM-GW-Realm 24g36.4.19 DRMP . 24g36.4.20 Load 24g37 Diameter-based S6t Interface . 24g37.1 Introduction 24g37.2 Procedure Descriptions . 25g37.2.1 Configuration Information on S6t . 25g37.2.1.1 General 25g3

24、7.2.1.2 Detailed Behaviour of the HSS . 27g37.2.1.3 Detailed Behaviour of the SCEF . 29g37.2.2 Reporting on S6t . 30g37.2.2.1 General 30g37.2.2.2 Detailed Behaviour of the HSS . 31g37.2.2.3 Detailed Behaviour of the SCEF . 32g37.2.3 NIDD Information on S6t . 32g37.2.3.1 General 32g37.2.3.2 Detailed

25、Behaviour of the HSS . 33g37.2.3.3 Detailed Behaviour of the SCEF . 34g38 Protocol Specification for S6t 34g38.1 Introduction 34g38.1.1 Use of Diameter Base Protocol . 34g38.1.2 Securing Diameter Messages 34g38.1.3 Accounting Functionality . 35g38.1.4 Use of Sessions . 35g38.1.5 Transport Protocol 3

26、5g38.1.6 Routing Considerations . 35g38.1.7 Advertising Application Support 35g38.1.8 Diameter Application Identifier 35g38.1.9 Use of the Supported-Features AVP . 35g38.1.10 User Identity to HSS resolution 36g38.2 Commands 36g38.2.1 Introduction. 36g38.2.2 Command-Code values . 36g38.2.3 Configurat

27、ion Information Request (CIR) Command 37g38.2.4 Configuration-Information-Answer (CIA) Command 37g38.2.5 Reporting-Information-Request (RIR) Command 38g38.2.6 Reporting-Information-Answer (RIA) Command 38g38.2.7 NIDD Information Request (NIR) Command. 38g38.2.8 NIDD-Information-Answer (NIA) Command

28、39g38.3 Result-Code AVP and Experimental-Result AVP Values . 39g38.3.1 General 39g38.3.2 Success 39g38.3.3 Permanent Failures . 40g38.3.3.1 DIAMETER_ERROR_USER_UNKNOWN (5001) 40g38.3.3.2 DIAMETER_ERROR_UNAUTHORIZED_REQUESTING_ENTITY (5510) . 40g38.3.3.3 DIAMETER_ERROR_UNAUTHORIZED_SERVICE (5511) . 4

29、0g38.3.3.4 DIAMETER_ERROR_REQUESTED_RANGE_IS_NOT ALLOWED (5512) 40g38.3.3.5 DIAMETER_ERROR_CONFIGURATION_EVENT_STORAGE_NOT_ SUCCESSFUL (5513) 40g38.3.3.6 DIAMETER_ERROR_CONFIGURATION_EVENT_NON_EXISTANT (5514) 40g38.3.3.7 DIAMETER_ERROR_USER_NO_APN_SUBSCRIPTION (5451) . 40g38.4 AVPs 40g3ETSI ETSI TS

30、129 336 V14.4.0 (2018-01)53GPP TS 29.336 version 14.4.0 Release 148.4.1 General 40g38.4.2 Monitoring-Event-Configuration 44g38.4.3 Monitoring-Event-Report . 45g38.4.4 SCEF-Reference-ID 45g38.4.5 SCEF-ID . 46g38.4.6 SCEF-Reference-ID-for-Deletion . 46g38.4.7 Monitoring-Type . 46g38.4.8 Maximum-Number

31、-of-Reports . 46g38.4.9 UE-Reachability-Configuration 46g38.4.10 Monitoring-Duration . 46g38.4.11 Maximum-Detection-Time . 46g38.4.12 Reachability-Type . 47g38.4.13 Maximum-Latency 47g38.4.14 Maximum-Response-Time . 47g38.4.15 Location-Information-Configuration 47g38.4.16 MONTE-Location-Type . 47g38

32、.4.17 Accuracy . 47g38.4.18 Association-Type 48g38.4.19 Roaming-Information . 48g38.4.20 Reachability-Information 48g38.4.21 EPS-Location-Information 48g38.4.22 IMEI-Change 48g38.4.23 Feature-List AVP 49g38.4.23.1 Feature-List AVP for the S6t application 49g38.4.24 Monitoring-Event-Config-Status 49g

33、38.4.25 AESE-Communication-Pattern . 50g38.4.26 Communication-Pattern-Set 50g38.4.27 Periodic-Communication-Indicator 50g38.4.28 Communication-duration-time 51g38.4.29 Periodic-time. 51g38.4.30 Scheduled-communication-time . 51g38.4.31 Stationary indication . 51g38.4.32 AESE-Communication-Pattern-Co

34、nfig-Status . 51g38.4.33 AESE-Error-Report 51g38.4.34 MME-Location-Information . 52g38.4.35 SGSN-Location-Information 52g38.4.36 User-Identifier . 53g38.4.37 Service-Result . 53g38.4.38 Service-Result-Code . 53g38.4.39 CIR-Flags 53g38.4.40 Supported-Services . 54g38.4.41 Supported-Monitoring-Events

35、54g38.4.42 Reference-ID-Validity-Time. 54g38.4.43 Event-Handling . 55g38.4.44 NIDD-Authorization-Request . 55g38.4.45 NIDD-Authorization-Response 55g38.4.46 DRMP . 55g38.4.47 Service-Report 55g38.4.48 Node-Type 56g38.4.49 Service-Selection 56g38.4.50 S6t-HSS-Cause . 56g38.4.51 Enhanced-Coverage-Rest

36、riction . 56g38.4.52 Enhanced-Coverage-Restriction-Data 56g38.4.53 Restricted-PLMN-List 57g38.4.54 Allowed-PLMN-List . 57g38.4.55 Requested-Validity-Time 57g38.4.56 Granted-Validity-Time . 57g38.4.57 NIDD-Authorization-Update 57g38.4.58 Loss-Of-Connectivity-Reason 58g38.4.59 Group-Reporting-Guard-Ti

37、mer. 58g38.4.60 CIA-Flags . 58g38.4.61 Group-Monitoring-Event-Report 58g3ETSI ETSI TS 129 336 V14.4.0 (2018-01)63GPP TS 29.336 version 14.4.0 Release 148.4.62 Group-Monitoring-Event-Report-Item . 58g38.4.63 RIR-Flags 59g38.4.64 Type-Of-External-Identifier 59g38.4.65 APN-Validity-Time 59g3Annex A (no

38、rmative): Diameter overload control mechanism 61g3A.1 General . 61g3A.2 S6m interface 61g3A.2.1 General 61g3A.2.2 HSS behaviour 61g3A.2.3 MTC-IWF behaviour 61g3A.3 S6t interface 61g3A.3.1 General 61g3A.3.2 HSS behaviour 62g3A.3.3 SCEF behaviour 62g3Annex B (Informative): Diameter overload control no

39、de behaviour . 63g3B.1 Introduction 63g3B.2 Message prioritisation over S6m 63g3B.3 Message prioritisation over S6t 63g3Annex C (normative): Diameter message priority mechanism 64g3C.1 General . 64g3C.2 S6m, S6n, S6t interfaces . 64g3Annex D (normative): Diameter load control mechanism 65g3D.1 Gener

40、al . 65g3D.2 S6m interface 65g3D.2.1 General 65g3D.2.2 HSS behaviour 65g3D.2.3 MTC-IWF behaviour 65g3D.3 S6t interface 65g3D.3.1 General 65g3D.3.2 HSS behaviour 65g3D.3.3 SCEF behaviour 66g3Annex E (informative): Change history . 67g3History 70g3ETSI ETSI TS 129 336 V14.4.0 (2018-01)73GPP TS 29.336

41、version 14.4.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the

42、 present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document unde

43、r change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 336 V14.4.0 (2018-01)83GPP TS 29.336 version

44、 14.4.0 Release 141 Scope The present document describes the Diameter-based interfaces between the HSS and other network elements involved in the architecture for interworking with packet data networks and applications, such as Machine-Type Communications (MTC). In particular, this document specifie

45、s the S6m interface between the Home Subscriber Server (HSS) and the MTC Interworking Function (MTC-IWF), the S6n interface between the HSS and the MTC-AAA and the S6t interface between the HSS and the Service Capability Exposure Function (SCEF). The procedures over those interfaces are defined in 3

46、GPP TS 23.682 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific

47、reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present doc

48、ument. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.682: “Architecture enhancements to facilitate communications with packet data networks and applications“. 3 Void. 4 3GPP TS 33.210: “3G security; Network Domain Security (NDS); IP network layer security“. 5 IETF RFC 4960: “S

49、tream Control Transport Protocol“. 6 3GPP TS 29.228: “IP multimedia (IM) Subsystem Cx Interface; Signalling flows and Message Elements“. 7 3GPP TS 29.229: “Cx and Dx interfaces based on the Diameter protocol; protocol details “. 8 3GPP TS 29.173: “Diameter-based SLh interface for Control Plane LCS“. 9 IETF RFC 5234: “Augmented BNF for Syntax Specifications: ABNF“. 10 3GPP TS 29.329: “Sh Interface based on the Diameter protocol“. 11 3GPP TS 23.003: “Numbering, addressing and identification“. 12 3GPP TS 29.338: “Diameter based protocols to support SMS

展开阅读全文
相关资源
猜你喜欢
  • EN 3890-2001 en Aerospace Series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler Metal for Welding《航空航天系列 FE-WM1502钢(X11CrNiMoVN12-3) 焊接用金属填充料》.pdf EN 3890-2001 en Aerospace Series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler Metal for Welding《航空航天系列 FE-WM1502钢(X11CrNiMoVN12-3) 焊接用金属填充料》.pdf
  • EN 3892-2001 en Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding《航空航天系列 钛合金 TI-W64001 焊接用填缝金属[代替 ASD-STAN PREN 3892]》.pdf EN 3892-2001 en Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding《航空航天系列 钛合金 TI-W64001 焊接用填缝金属[代替 ASD-STAN PREN 3892]》.pdf
  • EN 3893-2001 en Aerospace Series - Titanium Alloy TI-W19001 - Filler Metal for Welding《航空航天系列 TI-W19001型钛合金 焊接用金属填充料》.pdf EN 3893-2001 en Aerospace Series - Titanium Alloy TI-W19001 - Filler Metal for Welding《航空航天系列 TI-W19001型钛合金 焊接用金属填充料》.pdf
  • EN 3894-2001 en Aerospace Series - Heat Resisting Alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler Metal for Welding《航空航天系列 耐热合金NI-WD3201(NiMo25Fe6Cr5) 焊接填充金属》.pdf EN 3894-2001 en Aerospace Series - Heat Resisting Alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler Metal for Welding《航空航天系列 耐热合金NI-WD3201(NiMo25Fe6Cr5) 焊接填充金属》.pdf
  • EN 3895-2001 en Aerospace Series - Heat Resisting Alloy NI-WH3901 (NiCr16Mo15) - Filler Metal for Welding《航空航天系列 耐热合金 NI-WH3901(NiCr16Mo15) 焊接用填缝金属》.pdf EN 3895-2001 en Aerospace Series - Heat Resisting Alloy NI-WH3901 (NiCr16Mo15) - Filler Metal for Welding《航空航天系列 耐热合金 NI-WH3901(NiCr16Mo15) 焊接用填缝金属》.pdf
  • EN 3896-2001 en Aerospace Series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for Welding《航空航天系列 FE-WM1501(X13CrNiMoCo12-3-2-2)钢 焊接用填缝金属》.pdf EN 3896-2001 en Aerospace Series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for Welding《航空航天系列 FE-WM1501(X13CrNiMoCo12-3-2-2)钢 焊接用填缝金属》.pdf
  • EN 3897-2001 en Aerospace Series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler Metal for Welding《航空航天系列 FE-WA4801钢(X6CrNiMnNb18-10) 焊接填充金属》.pdf EN 3897-2001 en Aerospace Series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler Metal for Welding《航空航天系列 FE-WA4801钢(X6CrNiMnNb18-10) 焊接填充金属》.pdf
  • EN 3899-2004 en Aerospace series - Inserts thickwall self-locking MJ threads in heat resisting steel FE-PM3801 (17-4PH) - Technical specification《航空航天系列 耐热钢FE-PM3801(17-4PH)制MJ螺纹自锁.pdf EN 3899-2004 en Aerospace series - Inserts thickwall self-locking MJ threads in heat resisting steel FE-PM3801 (17-4PH) - Technical specification《航空航天系列 耐热钢FE-PM3801(17-4PH)制MJ螺纹自锁.pdf
  • EN 39-2001 en Loose Steel Tubes for Tube and Coupler Scaffolds - Technical Delivery Conditions《管联接脚手架用活动钢管 交货技术条件HD 1039-1990》.pdf EN 39-2001 en Loose Steel Tubes for Tube and Coupler Scaffolds - Technical Delivery Conditions《管联接脚手架用活动钢管 交货技术条件HD 1039-1990》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1