ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf

上传人:figureissue185 文档编号:742659 上传时间:2019-01-11 格式:PDF 页数:52 大小:292.72KB
下载 相关 举报
ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf_第1页
第1页 / 共52页
ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf_第2页
第2页 / 共52页
ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf_第3页
第3页 / 共52页
ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf_第4页
第4页 / 共52页
ETSI TS 129 338-2017 Universal Mobile Telecommunications System (UMTS) LTE Diameter based protocols to support Short Message Service (SMS) capable Mobile Management Entities (MMEs).pdf_第5页
第5页 / 共52页
点击查看更多>>
资源描述

1、 ETSI TS 1Universal Mobile TelDiameter baShort Mcapable Mobile(3GPP TS 29.3TECHNICAL SPECIFICATION129 338 V13.3.0 (2017elecommunications System (LTE; based protocols to support Message Service (SMS) ile Management Entities (MME.338 version 13.3.0 Release 1317-01) (UMTS); Es) 13) ETSI ETSI TS 129 338

2、 V13.3.0 (2017-01)13GPP TS 29.338 version 13.3.0 Release 13Reference RTS/TSGC-0429338vd30 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre

3、 la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document

4、 shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within E

5、TSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present d

6、ocument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by

7、 written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM

8、, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETS

9、I ETSI TS 129 338 V13.3.0 (2017-01)23GPP TS 29.338 version 13.3.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members

10、and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org

11、/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pre

12、sent document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being re

13、ferences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will

14、not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 338 V13.3.0 (2017-01)33GPP TS 29.338

15、version 13.3.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 General . 8g34.1 Introduction 8g34.2 Use of Diameter Base prot

16、ocol . 8g34.3 Securing Diameter messages 8g34.4 Accounting functionality 9g34.5 Use of sessions . 9g34.6 Transport protocol 9g34.7 Advertising application support . 9g34.8 Diameter Application Identifier . 9g34.9 Use of the Supported-Features AVP 10g35 Diameter based S6c interface between HSS and ce

17、ntral SMS functions . 10g35.1 Introduction 10g35.2 Procedures description . 10g35.2.1 Send Routing Info for SM procedure 10g35.2.1.1 General 10g35.2.1.2 Detailed behaviour of the SMS-GMSC. 13g35.2.1.3 Detailed behaviour of the HSS 13g35.2.1.4 Detailed behaviour of the SMS Router . 14g35.2.2 Alert Se

18、rvice Centre procedure . 14g35.2.2.1 General 14g35.2.2.2 Detailed behaviour of the HSS 15g35.2.2.3 Detailed behaviour of the SMS-IWMSC 16g35.2.3 Report SM Delivery Status procedure 16g35.2.3.1 General 16g35.2.3.2 Detailed behaviour of the SMS-GMSC. 17g35.2.3.3 Detailed behaviour of IP-SM-GW 18g35.2.

19、3.4 Detailed behaviour of the HSS 18g35.3 Protocol specification . 18g35.3.1 Routing considerations . 18g35.3.1.1 Requests from the SMS-GMSC or the SMS router . 18g35.3.1.1.1 Introduction . 18g35.3.1.1.2 Routing from the originating PLMN . 19g35.3.1.1.3 Routing in the HPLMN . 19g35.3.1.2 Requests fr

20、om the HSS . 20g35.3.2 Commands 20g35.3.2.1 Introduction . 20g35.3.2.2 Command-Code values . 20g35.3.2.3 Send-Routing-Info-for-SM-Request (SRR) Command . 21g35.3.2.4 Send-Routing-info-for-SM-Answer (SRA) Command . 21g35.3.2.5 Alert-Service-Centre-Request (ALR) Command 22g35.3.2.6 Alert-Service-Centr

21、e-Answer (ALA) Command 22g35.3.2.7 Report-SM-Delivery-Status-Request (RDR) Command . 22g35.3.2.8 Report-SM-Delivery-Status-Answer (RDA) Command . 23g3ETSI ETSI TS 129 338 V13.3.0 (2017-01)43GPP TS 29.338 version 13.3.0 Release 135.3.3 AVPs . 23g35.3.3.1 General 23g35.3.3.2 SM-RP-MTI 25g35.3.3.3 SM-R

22、P-SMEA 25g35.3.3.4 SRR-Flags . 25g35.3.3.5 SM-Delivery-Not-Intended . 26g35.3.3.6 Serving-Node 26g35.3.3.7 Additional-Serving-Node 27g35.3.3.8 MWD-Status . 27g35.3.3.9 MME-Absent-User-Diagnostic-SM 28g35.3.3.10 MSC-Absent-User-Diagnostic-SM . 28g35.3.3.11 SGSN-Absent-Subscriber-Diagnostic-SM 28g35.3

23、.3.12 Feature-List-ID AVP . 28g35.3.3.13 Feature-List AVP 28g35.3.3.14 SM-Delivery-Outcome 28g35.3.3.15 MME-SM-Delivery-Outcome . 28g35.3.3.16 MSC-SM-Delivery-Outcome 28g35.3.3.17 SGSN-SM-Delivery-Outcome 29g35.3.3.18 IP-SM-GW-SM-Delivery-Outcome 29g35.3.3.19 SM-Delivery-Cause. 29g35.3.3.20 Absent-U

24、ser-Diagnostic-SM . 29g35.3.3.21 RDR-Flags 29g35.3.3.22 Maximum-UE-Availability-Time . 30g35.3.3.23 SMS-GMSC-Alert-Event 30g35.3.3.24 DRMP . 30g35.4 User identity to HSS resolution 30g36 Diameter based SGd/Gdd interfaces between MME/SGSN and central SMS functions . 31g36.1 Introduction 31g36.2 Proce

25、dures description . 31g36.2.1 MO Forward Short Message procedure 31g36.2.1.1 General 31g36.2.1.2 Detailed behaviour of the MME, the SGSN and the IP-SM-GW 33g36.2.1.3 Detailed behaviour of the SMS-IWMSC 33g36.2.2 MT Forward Short Message procedure 33g36.2.2.1 General 33g36.2.2.2 Detailed behaviour of

26、 the MME and the SGSN 35g36.2.2.3 Detailed behaviour of the SMS-GMSC. 36g36.2.3 Alert Service Centre procedure . 37g36.2.3.1 General 37g36.2.3.2 Detailed behaviour of the MME and the SGSN 38g36.2.3.3 Detailed behaviour of the SMS-GMSC. 39g36.2.3.4 Detailed behaviour of the SMS-Router . 39g36.3 Proto

27、col specification . 39g36.3.1 Routing considerations . 39g36.3.1.1 Routing for MO Forward SM messages: 39g36.3.1.2 Routing for MT Forward SM messages: . 40g36.3.2 Commands 40g36.3.2.1 Introduction . 40g36.3.2.2 Command-Code values . 40g36.3.2.3 MO-Forward-Short-Message-Request (OFR) Command . 41g36.

28、3.2.4 MO-Forward-Short-Message-Answer (OFA) Command . 41g36.3.2.5 MT-Forward-Short-Message-Request (TFR) Command 41g36.3.2.6 MT-Forward-Short-Message-Answer (TFA) Command 42g36.3.3 AVPs . 42g36.3.3.1 General 42g36.3.3.2 SC-Address . 44g36.3.3.3 SM-RP-UI . 44g36.3.3.4 TFR-Flags . 44g36.3.3.5 SM-Deliv

29、ery-Failure-Cause 44g36.3.3.6 SM-Enumerated-Delivery-Failure-Cause . 45g36.3.3.7 SM-Diagnostic-Info 45g3ETSI ETSI TS 129 338 V13.3.0 (2017-01)53GPP TS 29.338 version 13.3.0 Release 136.3.3.8 Feature-List-ID AVP . 45g36.3.3.9 Feature-List AVP 45g36.3.3.10 SM-Delivery-Timer. 45g36.3.3.11 SM-Delivery-S

30、tart-Time . 45g36.3.3.12 OFR-Flags . 45g36.3.3.13 SMSMI-Correlation-ID . 46g36.3.3.14 HSS-ID 46g36.3.3.15 Originating-SIP-URI . 46g36.3.3.16 Destination-SIP-URI. 46g36.3.3.17 Maximum-Retransmission-Time 46g36.3.3.18 Requested-Retransmission-Time 46g36.3.3.19 SMS-GMSC-Address 46g36.3.3.20 DRMP . 47g3

31、7 Result Codes and Experimental-Result values . 47g37.1 General . 47g37.2 Success . 47g37.3 Permanent Failures . 47g37.3.1 General 47g37.3.2 DIAMETER_ERROR_USER_UNKNOWN (5001) 47g37.3.3 DIAMETER_ERROR_ABSENT_USER (5550) . 47g37.3.4 DIAMETER_ERROR_USER_BUSY_FOR_MT_SMS (5551) . 47g37.3.5 DIAMETER_ERRO

32、R_FACILITY_NOT_SUPPORTED (5552) 47g37.3.6 DIAMETER_ERROR_ILLEGAL_USER (5553) 48g37.3.7 DIAMETER_ERROR_ILLEGAL_EQUIPMENT (5554) . 48g37.3.8 DIAMETER_ERROR_SM_DELIVERY_FAILURE (5555) . 48g37.3.9 DIAMETER_ERROR_SERVICE_NOT_SUBSCRIBED (5556) 48g37.3.10 DIAMETER_ERROR_SERVICE_BARRED (5557) 48g37.3.11 DIA

33、METER_ERROR_MWD_LIST_FULL (5558) 48g37.4 Transient Failures . 48g37.4.1 General 48g3Annex A (normative): Diameter message priority mechanism 49g3A.1 General . 49g3A.2 S6c, SGd, Gdd interfaces . 49g3Annex B (informative): Change history . 50g3History 51g3ETSI ETSI TS 129 338 V13.3.0 (2017-01)63GPP TS

34、 29.338 version 13.3.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the content

35、s of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved docum

36、ent under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 338 V13.3.0 (2017-01)73GPP TS 29.338

37、 version 13.3.0 Release 131 Scope The present document defines the Diameter-based interfaces specific to SMS when they are used in conjunction with the “SMS in MME“ architecture specified in 3GPP TS 23.272 2 or for SGSN supporting EPS interfaces. It comprises: - the Diameter application for the S6c

38、interface between the HSS and the central SMS functions (SMS-GMSC, SMS Router) ; - the Diameter application - for the SGd interface between the MME, the SMS-IWMSC, the SMS-GMSC and the SMS Router. - for the Gdd interface between the SGSN, the SMS-IWMSC, the SMS-GMSC and the SMS Router. 2 References

39、The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revision

40、s do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Voca

41、bulary for 3GPP Specifications“. 2 3GPP TS 23.272: “Circuit Switched (CS) fallback in Evolved Packet System (EPS); Stage 2“. 3 3GPP TS 23.040: “Technical realization of the Short Message Service (SMS)“. 4 3GPP TS 29.272: “Evolved Packet System (EPS); Mobility Management Entity (MME) and Serving GPRS

42、 Support Node (SGSN) related interfaces based on Diameter protocol“. 5 3GPP TS 29.229: “Cx and Dx interfaces based on the Diameter protocol; Protocol details“. 6 IETF RFC 2234: “Augmented BNF for Syntax Specifications: ABNF“. 7 IETF RFC 3588: “Diameter Base Protocol“. 8 IETF RFC 5516: “Diameter Comm

43、and Code Registration for the Third Generation Partnership Project (3GPP) Evolved Packet System (EPS)“. 9 3GPP TS 29.002: “Mobile Application Part (MAP) specification“. 10 3GPP TS 29.173: “Location Services (LCS); Diameter-based SLh interface for Control Plane LCS“. 11 3GPP TS 33.210: “3G security;

44、Network Domain Security (NDS); IP network layer security “. 12 IETF RFC 4960: “Stream Control Transport Protocol“. 13 ITU-T Recommendation E.164: “The international public telecommunication numbering plan“. 14 3GPP TS 29.329: “Sh Interface based on the Diameter protocol; Protocol details“. 15 3GPP T

45、S 29.336: “Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applications“. 16 3GPP TS 23.003: “Numbering, addressing and identification“. ETSI ETSI TS 129 338 V13.3.0 (2017-01)83GPP TS 29.338 version 13.3.0 Release 1317 3GPP TS 23.204: “Support of Short

46、 Message Service (SMS) over generic 3GPP Internet Protocol (IP) access; Stage 2“. 18 3GPP TS 23.682: “Architecture enhancements to facilitate communications with packet data networks and applications“. 19 IETF RFC 7944: “Diameter Routing Message Priority“. 3 Definitions, symbols and abbreviations 3.

47、1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. 3.2 Abbreviations For the purposes of the present docu

48、ment, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. ABNF Augmented Backus-Naur Form DRMP Diameter Routing Message Priority IANA Internet Assigned N

49、umbers Authority IP-SM-GW IP Short Message Gateway MWD Message Waiting Data RP Relay layer Protocol RP-MTI RP Message Type Indicator RP-SMEA RP SME-Address RP-UI RP User Information SM RL Short Message Relay Layer SMS-GMSC Gateway MSC for SMS SMS-IWMSC Interworking MSC for SMS SMSMI SMS without MSISDN in IMS 4 General 4.1 Introduction The SMS in MME architecture is described in 3GPP TS 23.272 2 and has specified the reference points S6c and SGd. The clause 4 addresses Diameter aspects which are common to S6c, SGd and Gdd. 4.2

展开阅读全文
相关资源
猜你喜欢
  • BS EN 586-3-2002 Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form《铝和铝合金 锻件 尺寸和形状公差》.pdf BS EN 586-3-2002 Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form《铝和铝合金 锻件 尺寸和形状公差》.pdf
  • BS EN 588-1-1997 Fibre-cement pipes for sewers and drains - Pipes joints and fittings for gravity systems《下水管和排水道用纤维水泥管 第1部分 重力管路系统用管道、管连接件和管配件》.pdf BS EN 588-1-1997 Fibre-cement pipes for sewers and drains - Pipes joints and fittings for gravity systems《下水管和排水道用纤维水泥管 第1部分 重力管路系统用管道、管连接件和管配件》.pdf
  • BS EN 588-2-2002 Fibre-cement pipes for sewers and drains - Manholes and inspection chambers《下水管和排水道用纤维水泥管 人孔和检验井》.pdf BS EN 588-2-2002 Fibre-cement pipes for sewers and drains - Manholes and inspection chambers《下水管和排水道用纤维水泥管 人孔和检验井》.pdf
  • BS EN 59-2016 Glass reinforced plastics Determination of indentation hardness by means of a Barcol hardness tester《玻璃纤维增强塑料 采用巴氏硬度试验装置测定压痕硬度》.pdf BS EN 59-2016 Glass reinforced plastics Determination of indentation hardness by means of a Barcol hardness tester《玻璃纤维增强塑料 采用巴氏硬度试验装置测定压痕硬度》.pdf
  • BS EN 590-2013 Automotive fuels Diesel Requirements and test methods《内燃机燃料 柴油 试验方法和要求》.pdf BS EN 590-2013 Automotive fuels Diesel Requirements and test methods《内燃机燃料 柴油 试验方法和要求》.pdf
  • BS EN 594-2011 Timber structures Test methods Racking strength and stiffness of timber frame wall panels《木结构 试验方法 木框架墙面板的挤压强度和坚硬性》.pdf BS EN 594-2011 Timber structures Test methods Racking strength and stiffness of timber frame wall panels《木结构 试验方法 木框架墙面板的挤压强度和坚硬性》.pdf
  • BS EN 595-1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour《木材结构 试验方法 测量强度和变形特性用桁架试验》.pdf BS EN 595-1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour《木材结构 试验方法 测量强度和变形特性用桁架试验》.pdf
  • BS EN 596-1995 Timber structures - Test methods - Soft body impact test of timber framed walls《木结构 试验方法 木框架墙的软体冲击试验》.pdf BS EN 596-1995 Timber structures - Test methods - Soft body impact test of timber framed walls《木结构 试验方法 木框架墙的软体冲击试验》.pdf
  • BS EN 599-2-2016 Durability of wood and wood-based products Efficacy of preventive wood preservatives as determined by biological tests Labelling《木材和木制品的耐久性 用生物试验确定预防性木材防腐剂的功效 标记》.pdf BS EN 599-2-2016 Durability of wood and wood-based products Efficacy of preventive wood preservatives as determined by biological tests Labelling《木材和木制品的耐久性 用生物试验确定预防性木材防腐剂的功效 标记》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1