ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf

上传人:ideacase155 文档编号:742818 上传时间:2019-01-11 格式:PDF 页数:18 大小:630.98KB
下载 相关 举报
ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf_第1页
第1页 / 共18页
ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf_第2页
第2页 / 共18页
ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf_第3页
第3页 / 共18页
ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf_第4页
第4页 / 共18页
ETSI TS 132 130-2018 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Network sharing Concepts and requirements (V15 0 0 3GPP TS 32 130 version 15.pdf_第5页
第5页 / 共18页
点击查看更多>>
资源描述

1、 ETSI TS 132 130 V14.1.0 (2018-01) Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Network sharing; Concepts and requirements (3GPP TS 32.130 version 14.1.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 132 130 V14.1.0 (2018-01)13GPP TS 32.130 version 14.1.0

2、Release 14Reference RTS/TSGS-0532130ve10 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor

3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written

4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh

5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the f

6、ollowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the P

7、DF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

8、3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 132 130 V14.1.0 (2018-01)23G

9、PP TS 32.130 version 14.1.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and

10、 can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

11、ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trade

12、marks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Menti

13、on of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may

14、refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.or

15、g/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “m

16、ust“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 130 V14.1.0 (2018-01)33GPP TS 32.130 version 14.1.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 Re

17、ferences 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Concepts and background 7g34.1 RAN sharing scenarios . 7g34.2 Management architecture . 8g35 Business level requirements . 9g35.1 Requirements 9g35.1.1 Requirements for the OAM 2 presented to TSG for approva

18、l; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduct

19、ion Network sharing is emerging as a mechanism for operators to substantially and sustainably improve network costs and to efficiently utilize network capacity. The traditional model of single ownership of all network layers and elements is being challenged and more and more operators are adopting n

20、etwork sharing as a means of cutting the heavy costs involved in initial roll-out, capital expenditure (CAPEX) and operational expenditure (OPEX). In general, an increasing number of operators are sharing their mobile networks. Main arguments presented are: - Increased rollout speed. - Quickly expan

21、ding coverage to meet customer demand for wider coverage. - Sharing low traffic areas. - Sharing high license burdens. - Lower CAPEX and OPEX. Network sharing has some major implications on the operations of the network. Alignment on operational priorities, common network planning/evolution strategy

22、, sharing end user data/subscriber data, sharing performance data, alarms etc. in the shared network need to be considered carefully. Privacy, security and competitive information are also important for the operations of a shared network. ETSI ETSI TS 132 130 V14.1.0 (2018-01)53GPP TS 32.130 version

23、 14.1.0 Release 141 Scope The present document describes concepts and high-level requirements for the Operations, Administration, Maintenance and Provisioning (OAM Principles and high level requirements“. 3 3GPP TS 32.102: “Telecommunication management; Architecture“. 4 3GPP TS 36.300: “Evolved Univ

24、ersal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2“. 5 3GPP TS 23.251: “Network sharing; Architecture and functional description“. 6 3GPP TS 36.314: “Evolved Universal Terrestrial Radio Access (E-UTRA); Layer 2 Measu

25、rements“ 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 32.101 2, TS 32.102 3 and TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any

26、, in TS 32.101 2, TS 32.102 3 and TR 21.905 1, in that order. Organizational roles: Master Operator (MOP): In Radio Access Network (RAN) and/or Core Network (CN) sharing scenarios, deployment and daily operation of shared network elements are entrusted to a single Actor, called the Master Operator.

27、The Master Operator provides network and OAM see TS 23.251 5), i.e. BTSs / BSCs (respectively NodeBs / RNCs and eNodeBs) in a 2G Radio Access Network (respectively a 3G Radio Access Network and an E-UTRA network); - Gateway Core Network (GWCN; see TS 23.251 5), in which not only the Radio Access Net

28、work elements are shared but also part or all of the Core Network elements (there is no passive core network sharing). In MOCN, POPs have a common S-RAN, have their individual Core Network and their own PLMN code(s), and use the same frequency on the S-RAN. Figure 4.1-1: Multiple Operator Core Netwo

29、rk (MOCN) In GWCN, besides sharing Radio Access Network nodes, the POPs also share Core Network nodes (see TS 23.251 5 clause 4.1). ETSI ETSI TS 132 130 V14.1.0 (2018-01)83GPP TS 32.130 version 14.1.0 Release 14Figure 4.1-2: GateWay Core Network (GWCN) 4.2 Management architecture The management arch

30、itecture for MOCN is depicted in figure 4.2-1. It is compliant with 3GPP management reference model (TS 32.101 2). Figure 4.2-1: Management architecture for MOCN In the MOCN scenario, all cells of the S-RAN are shared between POPs. The management architecture for GWCN is depicted in figure 4.2-2. It

31、 is compliant with 3GPP management reference model (TS 32.101 2). ETSI ETSI TS 132 130 V14.1.0 (2018-01)93GPP TS 32.130 version 14.1.0 Release 14Figure 4.2-2: Management architecture for GWCN 5 Business level requirements 5.1 Requirements 5.1.1 Requirements for the OAM ii/ UTRAN; iii/ E-UTRAN. REQ-N

32、S_GEN-CON-2 The MOPSR-DM shall support a capability allowing the MOP-NM to manage S-RAN according to any of the following scenarios: i/ Multi-Operator Core Network ii/ Gateway Core Network. REQ-NS_GEN-CON-3 The MOPSR-DM shall support a capability allowing the MOP-NM to know which POPs the shared res

33、ources belong to. REQ-NS_GEN-CON-4 The MOPSR-DM shall support a capability allowing the MOP-NM to configure which POPs share each cell. REQ-NS_GEN-CON-5 Any POP shall be able to activate a signaling-based trace / MDT session on its subscribers, whether they are attached to the POP own RAN or to the

34、S-RAN, provided: a/ this is compliant with the RAN sharing contract; and b/ user consent for participation in MDT is respected. REQ-NS_GEN-CON-6 The MOP shall be able, on behalf of any POP, to activate an area-based trace / MDT session, on the portion of the S-RAN that the POP shares and on the POP

35、subscribers only, from the MOP RAN DM or MOP NM, provided a/ only the POP related subscriber data are collected; ETSI ETSI TS 132 130 V14.1.0 (2018-01)103GPP TS 32.130 version 14.1.0 Release 14b/ this is compliant with the RAN sharing contract; and c/ user consent for participation in MDT is respect

36、ed. REQ-NS_GEN-CON-7 The MOP shall be able, on behalf of multiple POPs, to activate an area-based trace / MDT session, on the portion of the S-RAN that each POP shares and on each POP subscribers only, from the MOP RAN DM or MOP NM, provided: a/ each POP has access only to its subscriber data (i.e.

37、not to other POPs subscriber data); b/ this is compliant with the RAN sharing contract; and c/ user consent for participation in MDT is respected. 5.1.2 Requirements for the OA UEs from POP A and POP B are served in the S-RAN in a first come first served mode; - MOP is responsible for configuring th

38、e S-RAN accordingly. Figure 5.4.1-1: Fully pooled radio resources between two POPs 5.4.2 Alarm raised on a shared cell (MOCN scenario) In this use case, an alarm is raised on cell #1 of a shared (e)NodeB. According to the RAN sharing agreement, the two POPs A and B are informed by the MOP of the occ

39、urrence of this new alarm, as well as of the alarm clearance by the MOP. Figure 5.4.2-1. Handling of an alarm raised on a shared cell (MOCN) ETSI ETSI TS 132 130 V14.1.0 (2018-01)123GPP TS 32.130 version 14.1.0 Release 145.4.3 Single DM for managing S-RAN and POP own RAN In this use case, Operator A

40、 is a POP and manages its own (non-shared) NEs from its POP-RAN-DM while Operator B is both MOP and POP and manages S-RAN and its own (non-shared) NEs from a single DM. Operator B has several possibilities: Example #1: configure, NE per NE, which POPs share the cells that it manages; or Example #2:

41、define two separate groups of BTSs / (e)NodeBs: - one for the S-RAN NEs it shall then configure which POPs share the cells of this group of BTSs / (e)NodeBs; and - one for its own (non-shared) RAN NEs. Figure 5.4.3-1: Single DM for managing both S-RAN and own RAN 5.4.4 Management of measurements for

42、 cross-operator accounting based on data volume and QoS The operator has made an agreement to act as a Master Operator, MOP, for another operator (Participating Operator, POP) for RAN sharing. The agreement is regulated in an SLA, which states the following: The QoS profile criteria ARP-1 10 and GBR

43、-5 for QCI-4 and QCI-8 is supported. The DL QCI-4, GBR-5, and ARP-1 10 is charged by x Euro per Mbit, while UL QCI-4, GBR-5, and ARP-1 10 is charged by y Euro per Mbit. QCI-8 is charged z Euro per Mbit regardless of QoS. For cross operator accounting purpose, the network needs to provide data volume

44、 measurements with high reliability for the used QoS profile criteria to the MOP. ETSI ETSI TS 132 130 V14.1.0 (2018-01)133GPP TS 32.130 version 14.1.0 Release 146 Specification level requirements 6.1 Requirements REQ-NS_GEN-FUN-1 The IRPAgent shall support a capability allowing the IRPManager to co

45、nfigure which POPs share each cell. REQ-NS_GEN-FUN-2 The IRPAgent shall support a capability allowing the IRPManager to know which POPs share each cell. REQ-NS_GEN-FUN-3 In GWCN, the IRPAgent shall support a capability allowing the IRPManager to configure which POPs share each core network element.

46、REQ-NS_GEN-FUN-4 In GWCN, the IRPAgent shall support a capability allowing the IRPManager to know which POPs share each core network element. REQ-NS_PM-FUN-1 The IRPAgent shall have the capability to support subscription of UL and DL data volume measurements per QoS profile criteria for cross operat

47、or accounting purpose from the IRPManager. The QoS profile criteria may include one or more of the following criteria: one QCI indicator, one GBR Indicator, one ARP Indicator, where: - a QCI Indicator identifies one specific QCI value. If the indicator is not set then all QCI values should be taken

48、into account. - a GBR Indicator identifies one GBR range value defined by the management system. If the indicator is not set then all GBR ranges should be taken into account. - an ARP Indicator identifies one ARP priority value. If the indicator is not set then all ARP priority values should be take

49、n into account. REQ-NS_PM-FUN-2 The IRPAgent shall support the IRPManager setting the reliability for the counter instances in a measurement job. The detailed definition of reliability is vendor specific. REQ-NS_PM-FUN-3 The IRPAgent shall support up to a maximum number of 200 recorded counter instances per granularity period of data volume measurements for cross operator accounting purpose. REQ-NS_PM-FUN-4 The IRPAgent shall support the IRPManager to access a file containing data volume measurements for cross operator accounting

展开阅读全文
相关资源
猜你喜欢
  • BS EN 425-2002 Resilient and laminate floor coverings - Castor chair test《弹性地板和叠层地板覆盖物 椅子脚轮效应试验》.pdf BS EN 425-2002 Resilient and laminate floor coverings - Castor chair test《弹性地板和叠层地板覆盖物 椅子脚轮效应试验》.pdf
  • BS EN 4250-2001 Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil《航空航天系列 镍基合金NI-B41001(NiCr19Si7B) 硬钎焊填充金属 非晶质箔材》.pdf BS EN 4250-2001 Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil《航空航天系列 镍基合金NI-B41001(NiCr19Si7B) 硬钎焊填充金属 非晶质箔材》.pdf
  • BS EN 4258-1998 Metallic materials - General organization of standardization - Links between types of EN standards and their use《金属材料 标准化的一般组织 欧洲标准的类型与其使用之间的链接》.pdf BS EN 4258-1998 Metallic materials - General organization of standardization - Links between types of EN standards and their use《金属材料 标准化的一般组织 欧洲标准的类型与其使用之间的链接》.pdf
  • BS EN 4262-2013 Aerospace series Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) As forged Forging stock a or D 200 mm - 690 MPa Rm 880MPa《航空航天系列 耐热合金FE-PA4901(X12CrNiCoMoW21-20.pdf BS EN 4262-2013 Aerospace series Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) As forged Forging stock a or D 200 mm - 690 MPa Rm 880MPa《航空航天系列 耐热合金FE-PA4901(X12CrNiCoMoW21-20.pdf
  • BS EN 4263-2013 Aerospace series Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) As forged Forging stock a or D 200 mm - 690 MPa Rm 960MPa《航空航天系列 FE-PA4901 (X12CrNiCoMoW21-20) 型.pdf BS EN 4263-2013 Aerospace series Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) As forged Forging stock a or D 200 mm - 690 MPa Rm 960MPa《航空航天系列 FE-PA4901 (X12CrNiCoMoW21-20) 型.pdf
  • BS EN 4265-2013 Aerospace series Bearing spherical plain metal to metal in corrosion resisting steel Wide series Dimensions and loads Inch series《航空航天系列 耐腐蚀钢制金属对金属球形平面轴承 宽幅系列 尺寸与载荷.pdf BS EN 4265-2013 Aerospace series Bearing spherical plain metal to metal in corrosion resisting steel Wide series Dimensions and loads Inch series《航空航天系列 耐腐蚀钢制金属对金属球形平面轴承 宽幅系列 尺寸与载荷.pdf
  • BS EN 4266-2013 Aerospace series Bearing spherical plain metal to metal in corrosion resisting steel cadmium plated Wide series Dimensions and loads Inch series《航空航天系列 航空航天系列 耐腐蚀钢镀.pdf BS EN 4266-2013 Aerospace series Bearing spherical plain metal to metal in corrosion resisting steel cadmium plated Wide series Dimensions and loads Inch series《航空航天系列 航空航天系列 耐腐蚀钢镀.pdf
  • BS EN 4267-2001 Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm D 160 mm - Dimensions《航空航天系列 钛和钛合金制的圆形棒材 直径为6mm 160mm 尺寸》.pdf BS EN 4267-2001 Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm D 160 mm - Dimensions《航空航天系列 钛和钛合金制的圆形棒材 直径为6mm 160mm 尺寸》.pdf
  • BS EN 4268-2012 Aerospace series Metallic materials Heat treatment facilities General requirements《航空航天系列 金属材料 热处理设备 通用要求》.pdf BS EN 4268-2012 Aerospace series Metallic materials Heat treatment facilities General requirements《航空航天系列 金属材料 热处理设备 通用要求》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1