ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf

上传人:fuellot230 文档编号:742977 上传时间:2019-01-11 格式:PDF 页数:28 大小:181.69KB
下载 相关 举报
ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf_第1页
第1页 / 共28页
ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf_第2页
第2页 / 共28页
ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf_第3页
第3页 / 共28页
ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf_第4页
第4页 / 共28页
ETSI TS 132 302-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf_第5页
第5页 / 共28页
点击查看更多>>
资源描述

1、 ETSI TS 132 302 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP); Information Service (IS) (3GPP TS 32.30

2、2 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 132 302 V15.0.0 (2018-07)13GPP TS 32.302 version 15.0.0 Release 15Reference RTS/TSGS-0532302vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16

3、Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print

4、. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Por

5、table Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/port

6、al.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electroni

7、c or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All ri

8、ghts reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Memb

9、ers. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 132 302 V15.0.0 (2018-07)23GPP TS 32.302 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared

10、to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is a

11、vailable from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI

12、SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any w

13、hich are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword

14、This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspo

15、nding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“

16、 are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 302 V15.0.0 (2018-07)33GPP TS 32.302 version 15.0.0 Release 1

17、5Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 7g32 References 7g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 System overview 9g34.1 System Context 9g35 Information Object Classes 9g35.1 Im

18、ported information entities and local labels . 9g35.2 Class Diagram 10g35.2.1 Attributes and relationships 10g35.2.2 Inheritance 10g35.3 Information object classes definition 11g35.3.1 NtfSubscriber 11g35.3.1.1 Definition 11g35.3.1.2 Attributes . 11g35.3.2 NtfSubscription . 11g35.3.2.1 Definition 11

19、g35.3.2.2 Attributes . 11g35.3.2.3 State diagram. 12g35.3.3 NotificationIRP . 12g35.3.3.1 Definition 12g35.4 Information relationship definitions . 13g35.4.1 relation-ntfSubscriber-ntfSubscription (M) 13g35.4.1.1 Definition 13g35.4.1.2 Roles . 13g35.4.1.3 Constraints 13g35.4.2 relation-ntfIRP-ntfSub

20、scriber (M) 13g35.4.2.1 Definition 13g35.4.2.2 Roles . 13g35.4.2.3 Constraints 13g35.5 Information attribute definitions . 14g35.5.1 Definitions and legal values 14g35.5.2 Constraints 14g36 Interface Definition 15g36.1 Class diagram representing interfaces 15g36.2 Generic rules 15g36.3 notificationI

21、RPManagement Interface (M) 15g36.3.1 Operation subscribe (M) . 15g36.3.1.1 Definition 15g36.3.1.2 Input parameters 16g36.3.1.3 Output parameters . 16g36.3.1.4 Pre-condition . 16g36.3.1.5 Post-condition . 16g36.3.1.6 Exceptions . 17g36.3.2 Operation unsubscribe (M). 17g36.3.2.1 Definition 17g3ETSI ET

22、SI TS 132 302 V15.0.0 (2018-07)43GPP TS 32.302 version 15.0.0 Release 156.3.2.2 Input parameters 17g36.3.2.3 Output parameters . 17g36.3.2.4 Pre-condition . 17g36.3.2.5 Post-condition . 18g36.3.2.6 Exceptions . 18g36.4 subscriberManagement Interface (O) . 18g36.4.1 Operation getSubscriptionIds (M) 1

23、8g36.4.1.1 Definition 18g36.4.1.2 Input parameters 18g36.4.1.3 Output parameters . 18g36.4.1.4 Pre-condition . 19g36.4.1.5 Post-condition . 19g36.4.1.6 Exceptions . 19g36.5 subscriptionStatusOperations Interface (O) 19g36.5.1 Operation getSubscriptionStatus (M) . 19g36.5.1.1 Definition 19g36.5.1.2 I

24、nput parameters 19g36.5.1.3 Output parameters . 19g36.5.1.4 Pre-condition . 19g36.5.1.5 Post-condition . 19g36.5.1.6 Exceptions . 20g36.6 subscriptionFilterOperations Interface (O) . 20g36.6.1 Operation changeSubscriptionFilter (M) 20g36.6.1.1 Definition 20g36.6.1.2 Input parameters 20g36.6.1.3 Outp

25、ut parameters . 20g36.6.1.4 Pre-condition . 20g36.6.1.5 Post-condition . 20g36.6.1.6 Exceptions . 20g36.7 subscriptionSuspendOperations Interface (O) 21g36.7.1 Operation suspendSubscription (M) . 21g36.7.1.1 Definition 21g36.7.1.2 Input parameters 21g36.7.1.3 Output parameters . 21g36.7.1.4 Pre-cond

26、ition . 21g36.7.1.5 Post-condition . 21g36.7.1.6 Exceptions . 21g36.7.2 Operation resumeSubscription (M) . 21g36.7.2.1 Definition 21g36.7.2.2 Input parameters 21g36.7.2.3 Output parameters . 22g36.7.2.4 Pre-condition . 22g36.7.2.5 Post-condition . 22g36.7.2.6 Exceptions . 22g36.8 IRPManagementOperat

27、ions Interface (O) 23g36.8.1 Operation getNotificationCategories (M) 23g36.8.1.1 Definition 23g36.8.1.2 Input parameters 23g36.8.1.3 Output parameters . 23g36.8.1.4 Pre-condition . 23g36.8.1.5 Post-condition . 23g36.8.1.6 Exceptions . 23g36.9 NotificationIRPNotification Interface 24g3Annex A (inform

28、ative): Change history . 26g3History 27g3ETSI ETSI TS 132 302 V15.0.0 (2018-07)53GPP TS 32.302 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work wi

29、thin the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG

30、 for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes h

31、ave been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 32.301: Configuration Management (CM); Notific

32、ation Integration Reference Point (IRP): Requirements 32.302: Configuration Management (CM); Notification Integration Reference Point (IRP): Information Service (IS) 32.303: Configuration Management (CM); Notification Integration Reference Point (IRP): Common Object Request Broker Architecture (CORB

33、A) Solution Set (SS) 32.305: Configuration Management (CM); Notification Integration Reference Point (IRP): eXtensible Markup Language (XML) definition 32.307: Configuration Management (CM); Notification Integration Reference Point (IRP): Simple Object Access Protocol (SOAP) Solution Set (SS) The It

34、f-N interface is built up by a number of Integration Reference Points (IRPs) and a related Name Convention, which realise the functional capabilities over this interface. The basic structure of the IRPs is defined in 3GPP TS 32.101 5 and 3GPP TS 32.102 6. Network Elements (NEs) under management and

35、element managers generate notifications of events about occurrences within the network. Different kinds of events carry different kinds of information. For instance a new alarm as specified in Alarm IRP: Information Service 1, is one possible kind of event, an object creation as specified in Basic C

36、M IRP: Information Service 8 is another possible kind of event. Information of an event is carried in notification. An IRPAgent (typically an EM or a NE) emits notifications. IRPManager (typically a network management system) receives notifications. The purpose of Notification IRP is to define an in

37、terface through which an IRPManager can subscribe to IRPAgent for receiving notifications. This IRP bases its design on work captured in ITU-T Recommendation X.734 2, OMG Notification Service 4. The central design ideas are: - Separation of notification Consumers (IRPManagers) from Producers (IRPAge

38、nts); - Notifications are sent to IRPManagers without the need for IRPManagers to periodically check for new notifications. ETSI ETSI TS 132 302 V15.0.0 (2018-07)63GPP TS 32.302 version 15.0.0 Release 15Common characteristics related to notifications in all other IRPs are gathered in one IRP. ETSI E

39、TSI TS 132 302 V15.0.0 (2018-07)73GPP TS 32.302 version 15.0.0 Release 151 Scope The purpose of Notification IRP is to define an interface through which an IRPManager can subscribe to an IRPAgent for receiving notifications. The present document is the “Information Service“ of Notification IRP. It d

40、efines, for the purpose of subscribing to an IRPAgent for receiving notifications, the information observable and controlled by management systems client and it also specifies the semantics of the interactions used to carry this information. It also defines the information common to all notification

41、s which is called the notificationHeader. An IRPAgent supporting this IRP IS may emit one or multiple categories of notifications, such as alarms (as specified in Alarm IRP: Information Service 1) and others. This IRP IS defines a mechanism that IRPManager can use to determine the categories of noti

42、fications supported by an IRPAgent. It also defines a mechanism (subscribe and unsubscribe operations) that IRPManager can use to specify the categories of notifications IRPAgent should emit to IRPManager during subscription. It also defines a mechanism (getSubscriptionIds operation) that IRPManager

43、 can use to check which categories of notifications it has subscribed to. IRPManager can set and change filter criteria applicable during the life-cycle of a subscription. IRPManager can also exercise flow-control on IRPAgents emission of notifications (suspendSubscription and resumeSubscription ope

44、rations). Using different managerReference, an IRPManager can subscribe several times. It will result in multiple subscriptions. As far as IRPAgent is concerned, notifications are sent to multiple “places“. Using the same managerReference, an IRPManager can subscribe several times specifying differe

45、nt categories of notifications. This IRP IS does not specify information that is carried in some but not all notifications. That kind of information is specified in other IRP ISs involved. For example, perceivedSeverity is a piece of information specific for notifications carrying alarm information.

46、 This information is not defined in the present document but in Alarm IRP: Information Service 1. How IRPManager discovers the IRPAgents address or reference (so that IRPManager can invoke an operation) is outside the scope of the present document. This IRP IS is aligned with ITU-T M.3702 13 in term

47、s of the definitions of operations for Notification management. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version n

48、umber, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that

49、document in the same Release as the present document. 1 3GPP TS 32.111-2: “Telecommunication management; Fault Management; Part 2: Alarm Integration Reference Point (IRP): Information Service (IS)“. 2 ITU-T Recommendation X.734 (1992): “Information technology - Open Systems Interconnection - Systems management: Event report management function“. 3 3GPP TS 32.300: “Telecommunication management; Configuration Management (CM); Name convention for Managed Objects“. 4 OMG: “OMG Notification Service“. http:/www.omg.org/technology/documents/ 5 3GPP TS

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 14922-1-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 1 Guidance for selection and use (ISO 14922-1 1999) German version EN ISO 149.pdf DIN EN ISO 14922-1-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 1 Guidance for selection and use (ISO 14922-1 1999) German version EN ISO 149.pdf
  • DIN EN ISO 14922-2-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2 Comprehensive quality requirements (ISO 14922-2 1999) German version EN ISO.pdf DIN EN ISO 14922-2-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2 Comprehensive quality requirements (ISO 14922-2 1999) German version EN ISO.pdf
  • DIN EN ISO 14922-3-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3 Standard quality requirements (ISO 14922-3 1999) German version EN ISO 1492.pdf DIN EN ISO 14922-3-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3 Standard quality requirements (ISO 14922-3 1999) German version EN ISO 1492.pdf
  • DIN EN ISO 14922-4-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4 Elementary quality requirements (ISO 14922-4 1999) German version EN ISO 14.pdf DIN EN ISO 14922-4-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4 Elementary quality requirements (ISO 14922-4 1999) German version EN ISO 14.pdf
  • DIN EN ISO 14923-2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923 2003) German version EN ISO 14923 2003《热喷镀 热喷镀层的表征和检验》.pdf DIN EN ISO 14923-2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923 2003) German version EN ISO 14923 2003《热喷镀 热喷镀层的表征和检验》.pdf
  • DIN EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924 2005) English version of DIN EN ISO 14924 2005《热喷涂 热喷涂覆层的后续处理和精整》.pdf DIN EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924 2005) English version of DIN EN ISO 14924 2005《热喷涂 热喷涂覆层的后续处理和精整》.pdf
  • DIN EN ISO 14931-2015 Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931 2015) German version EN ISO 14931 2015《皮革 服饰用皮革的选择指南(毛皮除外)(ISO 14931-2015).pdf DIN EN ISO 14931-2015 Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931 2015) German version EN ISO 14931 2015《皮革 服饰用皮革的选择指南(毛皮除外)(ISO 14931-2015).pdf
  • DIN EN ISO 14935-1998 Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935 1998) German version EN ISO 14935 1998《石油及其相关产品 耐火.pdf DIN EN ISO 14935-1998 Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935 1998) German version EN ISO 14935 1998《石油及其相关产品 耐火.pdf
  • DIN EN ISO 14937-2010 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development validation and routine control ofO.pdf DIN EN ISO 14937-2010 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development validation and routine control ofO.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1