1、 ETSI TS 132 432 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Performance measurement: File format definition (3GPP TS 32.432 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETS
2、I ETSI TS 132 432 V15.0.0 (2018-07)13GPP TS 32.432 version 15.0.0 Release 15Reference RTS/TSGS-0532432vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but no
3、n lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of
4、 the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific n
5、etwork drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find er
6、rors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm ex
7、cept as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI l
8、ogo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and o
9、wned by the GSM Association. ETSI ETSI TS 132 432 V15.0.0 (2018-07)23GPP TS 32.432 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential I
10、PRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are a
11、vailable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which
12、 are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and co
13、nveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by E
14、TSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM
15、, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the
16、 ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 432 V15.0.0 (2018-07)33GPP TS 32.432 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3
17、Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Measurement Report File Format . 6g34.1 File Content description . 8g35 Measurement Report File Conventions and Transfer Procedure 10g3
18、5.1 Conventions 10g35.1.1 File generation 10g35.1.1.1 NE based approach 10g35.1.1.2 EM based approach . 10g35.1.2 File naming . 11g35.2 File transfer procedure 12g3Annex A (informative): The table oriented file format structure 13g3A.1 Graphical representation of the table structure . 13g3Annex B (i
19、nformative): Change history . 14g3History 15g3ETSI ETSI TS 132 432 V15.0.0 (2018-07)43GPP TS 32.432 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work wi
20、thin the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG
21、 for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes h
22、ave been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project: Technical Specification Group Services and System Aspects; Telecommunication management, as identified below: TS 32.432: “Performance measurement; File form
23、at definition“; TS 32.435: “Performance measurement; eXtensible Markup Language (XML) file format definition“; TS 32.436: “Performance measurement; Abstract Syntax Notation 1 (ASN.1) file format definition“. The present document is part of a set of specifications, which describe the requirements and
24、 information model necessary for the standardised Operation, Administration and Maintenance (OA Principles and high level requirements“. 2 3GPP TS 32.102: “Telecommunication management; Architecture“. 3 3GPP TS 32.401: “Telecommunication management; Performance Management (PM); Concept and requireme
25、nts“. 4 3GPP TS 32.600: “Telecommunication management; Configuration Management (CM); Concept and high-level requirements“. 5 3GPP TS 25.442: “UTRAN Implementation Specific O Configuration Management (CM); Name convention for Managed Objects“. 7 3GPP TS 52.402: “Telecommunication management; Perform
26、ance Management (PM); Performance measurements - GSM“. 8 Void. 9 3GPP TS 32.622: “Telecommunication management; Configuration Management (CM); Generic network resources Integration Reference Point (IRP): Network Resource Model (NRM)“. 10 ITU-T Recommendation X.680: “Information technology - Abstract
27、 Syntax Notation One (ASN.1): Specification of basic notation“. 11 ISO8601:2000(E) Data elements and interchange formats Information interchange Representation of dates and times“. 12 32.405: “Performance Management (PM); Performance measurements; Universal Terrestrial Radio Access Network (UTRAN)“.
28、 13 32.406 : “Performance Management (PM); Performance measurements; Core Network (CN) Packet Switched (PS) domain“. 14 32.407: “Performance Management (PM); Performance measurements; Core Network (CN) Circuit Switched (CS) domain; UMTS and combined UMTS/GSM“. 15 32.408 : “Performance Management (PM
29、); Performance measurements; Teleservice“. ETSI ETSI TS 132 432 V15.0.0 (2018-07)63GPP TS 32.432 version 15.0.0 Release 1516 32.409: “Performance Management (PM); Performance measurements; IP Multimedia Subsystem (IMS)“. 17 32.425: “Performance Management (PM); Performance measurements; Evolved Univ
30、ersal Terrestrial Radio Access Network (E-UTRAN)“. 18 32.426: “Performance Management (PM); Performance measurements; Evolved Packet Core (EPC) network“. 19 32.452 : “Performance Management (PM); Performance measurements; Home Node B (HNB) Subsystem HNS“. 20 32.453 : “Performance Management (PM); Pe
31、rformance measurements Home enhanced Node B (HeNB) Subsystem (HeNS)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: network Element Manager (EM): provides a package of end-user functions for management of a set of
32、 closely related types of Network Elements. These functions can be divided into two main categories: - Element Management Functions for management of Network Elements on an individual basis. These are basically the same functions as supported by the corresponding local terminals. - Sub-Network Manag
33、ement Functions that are related to a network model for a set of Network Elements constituting a clearly defined sub-network, which may include relations between the Network Elements. This model enables additional functions on the sub-network level (typically in the areas of network topology present
34、ation, alarm correlation, service impact analysis and circuit provisioning). Network Manager (NM): provides a package of end-user functions with the responsibility for the management of a network, mainly as supported by the EM(s) but it may also involve direct access to the Network Elements. All com
35、munication with the network is based on open and well-standardised interfaces supporting management of multi-vendor and multi-technology Network Elements. Operations System (OS): generic management system, independent of its location level within the management hierarchy. 3.2 Abbreviations For the p
36、urposes of the present document, the following abbreviations apply: 3G 3rdGeneration EM Element Manager GSM Global System for Mobile communications NE Network ElementNM Network Manager PLMN Public Land Mobile Network PM Performance Management 4 Measurement Report File Format This clause describes th
37、e format of measurement result files that can be transferred from the network (NEs or EM) to the NM. The following conditions have been considered in defining this file format: - Since the files are transferred via a machine-machine interface, the files applying the format definitions should be mach
38、ine-readable using standard tools. ETSI ETSI TS 132 432 V15.0.0 (2018-07)73GPP TS 32.432 version 15.0.0 Release 15- The file format should be independent of the data transfer protocol used to carry the file from one system to another. - The file format should be generic across PLMN systems. - The fi
39、le format should be flexible enough to include all possible measurement types, i.e. those specified within clause 6 as well as measurements defined within other standards bodies, or vendor specific measurement types. - The file format should not impose any dependency between granularity periods for
40、the generation of measurement results and file upload cycles for the file transfer from the network to the NM. - The file format should be flexible enough to support both the NE-based and the EM-based approaches, as discussed in Chapter 5, clause 5.1.1 of the present document. - The file format shou
41、ld be usable for other interfaces than Itf-N if required. The measurement file header could be augmented to indicate this other usage, however this would be a non-standard extension. In the ASN.1 (see ITU-T Recommendation X.680 10) file format definition this is accommodated by the use of the ellips
42、is notation. XML schema allows such additions through insertion of extra schema elements through the provider of the non-standard extension. ETSI ETSI TS 132 432 V15.0.0 (2018-07)83GPP TS 32.432 version 15.0.0 Release 154.1 File Content description Table 4.1 lists all the file content items. It also
43、 provides an explanation of the individual items. Table 4.1 File Content Description File Content Item Description measDataCollection This is the top-level tag, which identifies the file as a collection of measurement data. The file content is made up of a header (“measFileHeader“), the collection o
44、f measurement result items (“measData“), and a measurement file footer (“measFileFooter“). measFileHeader This is the measurement result file header to be inserted in each file. It includes a version indicator, the name, type and vendor name of the sending network node, and a time stamp (“collection
45、BeginTime“). measData The “measData“ construct represents the sequence of zero or more measurement result items contained in the file. It can be empty in case no measurement data can be provided. The individual “measData“ elements can appear in any order. Each “measData“ element contains the name of
46、 the NE (“nEId“) and the list of measurement results pertaining to that NE (“measInfo“). measFileFooter The measurement result file footer to be inserted in each file. It includes a time stamp, which refers to the end of the overall measurement collection interval that is covered by the collected me
47、asurement results being stored in this file. fileFormatVersion This parameter identifies the file format version applied by the sender. The format version defined in the present document shall be the abridged number and version of this 3GPP document (see below). The abridged number and version of a
48、3GPP document is constructed from its version specific full reference “3GPP (yyyy-mm)“ by: - removing the leading “3GPP TS“ - removing everything including and after the version third digit, representing editorial only changes, together with its preceding dot character - from the resulting string, r
49、emoving leading and trailing white space, replacing every multi character white space by a single space character and changing the case of all characters to uppercase. senderName The senderName uniquely identifies the NE or EM that assembled this measurement file by its Distinguished Name (DN), according to the definitions in 3GPP TS 32.300 6. In the case of the NE-based approach, it is identical to the senders “nEDistinguishedName“. senderType This is a user configurable identifier of the type of network node that generated the
