1、 ETSI TS 134 123-1 V12.3.0 (2016-05) Universal Mobile Telecommunications System (UMTS); User Equipment (UE) conformance specification; Part 1: Protocol conformance specification (3GPP TS 34.123-1 version 12.3.0 Release 12) TECHNICAL SPECIFICATION ETSI ETSI TS 134 123-1 V12.3.0 (2016-05)13GPP TS 34.1
2、23-1 version 12.3.0 Release 12Reference RTS/TSGR-0534123-1vc30 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0
3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without
4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p
5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comme
6、nt to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. Th
7、e content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are T
8、rade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 134 123-1 V12.3.0 (20
9、16-05)23GPP TS 34.123-1 version 12.3.0 Release 12Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be
10、 found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IP
11、R Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Thi
12、s Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspo
13、nding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“
14、 are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 123-1 V12.3.0 (2016-05)33GPP TS 34.123-1 version 12.3.0 Relea
15、se 12Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 74g3Introduction 74g31 Scope 75g32 References 76g33 Definitions and abbreviations . 79g33.1 Definitions 79g33.2 Abbreviations . 79g34 Overview 79g34.1 Test Methodology. 79g34.1.1 Testing of optional fun
16、ctions and procedures . 79g34.1.2 Test interfaces and facilities 79g34.2 Implicit Testing 79g35 Reference Conditions . 79g35.1 Generic setup procedures . 79g36 Idle mode operations 80g36.1 In a pure 3G environment . 86g36.1.1 PLMN selection 86g36.1.1.1 PLMN selection of RPLMN, HPLMN, UPLMN and OPLMN
17、; Manual mode 86g36.1.1.2 PLMN selection of “Other PLMN / access technology combinations“; Manual mode. 88g36.1.1.3 PLMN selection; independence of RF level and preferred PLMN; Manual mode . 91g36.1.1.4 PLMN selection of RPLMN, HPLMN, UPLMN and OPLMN; Automatic mode . 94g36.1.1.5 PLMN selection of “
18、Other PLMN / access technology combinations“; Automatic mode 96g36.1.1.6 Void. 98g36.1.1.7 Cell reselection of ePLMN in manual mode . 98g36.1.1.8 PLMN selection in shared network environment, Automatic mode . 99g36.1.1.9 PLMN selection in shared network environment, Manual Mode 102g36.1.1.10 Present
19、ation of additional information during PLMN selection; Manual mode . 106g36.1.1.11 Void. 108g36.1.1.12 Displaying EHPLMNs in manual mode 108g36.1.1.13 PLMN selection of RPLMN or (E)HPLMN; Automatic mode 111g36.1.1.14 Network selection mode at switch-on . 115g36.1.1.15 Exception in manual network sel
20、ection mode when HPLMN is available at power-on . 118g36.1.2 Cell selection and reselection 122g36.1.2.1 Cell reselection 122g36.1.2.1a Cell reselection for inter-band operation . 125g36.1.2.1b Cell reselection for inter-band operation(LCR TDD band a-f) . 125g36.1.2.2 Cell reselection using Qhyst, Q
21、offset and Treselection 126g36.1.2.3 HCS Cell reselection . 130g36.1.2.4 HCS Cell reselection using reselection timing parameters for the H criterion 132g36.1.2.5 HCS Cell reselection using reselection timing parameters for the R criterion 135g36.1.2.6 Emergency calls 138g36.1.2.7 Void. 140g36.1.2.8
22、 Cell reselection: Equivalent PLMN 140g36.1.2.9 Void. 144g36.1.2.9a Cell reselection using cell status and cell reservations Type “A” USIM . 144g36.1.2.9b Cell reselection using cell status and cell reservations Type “B” USIM 146g36.1.2.10 HCS inter-frequency cell reselection 148g36.1.2.10a HCS inte
23、r-frequency cell reselection for inter-band operation . 150g36.1.2.11 Cell reselection in shared network environment . 150g3ETSI ETSI TS 134 123-1 V12.3.0 (2016-05)43GPP TS 34.123-1 version 12.3.0 Release 126.1.2.12 Cell reselection based on absolute priority in SIB19 154g36.1.3 MBSFN Cluster select
24、ion and reselection 161g36.1.3.1 MBSFN only service recognition 161g36.1.3.2 Suitable PLMN selection; MBSFN Frequency List present (unicast carrier) . 165g36.1.3.3 Suitable PLMN search; MBSFN Frequency List not present (unicast carrier) . 171g36.1.3.4 Cell reservations and access restrictions; Norma
25、l access class only . 177g36.1.3.5 Cell reservations and access restrictions; Operator access class . 183g36.1.3.6 Cell reservations and access restrictions; Home country services access class . 190g36.1.3.7 Inter frequency neighbour reselection / Service activation . 192g36.1.3.8 Inter frequency ne
26、ighbour reselection / Activation of higher priority service 196g36.2 Multi-mode environment (2G/3G case) . 200g36.2.1 PLMN and RAT selection 200g36.2.1.1 Selection of the correct PLMN and associated RAT . 200g36.2.1.2 Selection of RAT for HPLMN; Manual mode 202g36.2.1.3 Selection of RAT for UPLMN; M
27、anual mode 208g36.2.1.4 Selection of RAT for OPLMN; Manual mode 210g36.2.1.5 Selection of “Other PLMN / access technology combinations“; Manual mode 212g36.2.1.6 Selection of RAT for HPLMN; Automatic mode . 215g36.2.1.7 Selection of RAT for UPLMN; Automatic mode . 217g36.2.1.8 Selection of RAT for O
28、PLMN; Automatic mode . 219g36.2.1.8a Selection of RAT for OPLMN; Different ITU regions . 221g36.2.1.9 Selection of “Other PLMN / access technology combinations“; Automatic mode . 231g36.2.1.10 Void. 233g36.2.1.11 Selection of PLMN and RAT in shared network environment, Manual Mode . 233g36.2.2 Cell
29、selection and reselection 237g36.2.2.1 Cell reselection if cell becomes barred or S1. 573g37.1.6.3.4 Impact on E-TFCI selection on MAC at UE for UL DRX at Node B/ MAC Inactivity Threshold =1 575g37.1.6.3.5 MAC-es/e transport block size selection(1.28Mcps TDD) 577g37.1.6.4 MAC-es/e - E-DCH retransmis
30、sions . 581g37.1.6.4.1 MAC-es/e process handling . 581g37.1.6.4.2 MAC-es/e maximum number of retransmissions 584g37.1.6.4.3 MAC-es/e Correct handling of MAC-es/e reset 587g37.1.6a E-DCH MAC-es/e for 3.84 and 7.68Mcps TDD 589g37.1.6a.1 MAC-es/e multiplexing . 589g37.1.6a.1.1 MAC-es/e multiplexing wit
31、hout RRC restrictions 589g37.1.6a.1.2 MAC-es/e multiplexing with RRC restrictions . 591g37.1.6a.1.3 Correct settings of MAC-es/e header fields . 593g37.1.6a.2 MAC-es/e Scheduling 595g37.1.6a.2.1 Correct settings of MAC-es/e scheduling information 595g37.1.6a.2.2 Correct settings of MAC-es/e scheduli
32、ng information when scheduling delay timer expires . 599g37.1.6a.2.3 MAC-es/e correct handling of scheduled transmissions 601g37.1.6a.2.4 MAC-es/e combined non-scheduled and scheduled transmissions . 603g37.1.6a.2.5 MAC-es/e Correct handling of HARQ profile power offsets 605g37.1.6a.3 MAC-es/e- E-TF
33、C selection 609g37.1.6a.3.1 MAC-es/e E-TFC priority . 609g37.1.6a.3.2 MAC-es/e transport block size selection/ UL QPSK . 611g37.1.6a.4 MAC-es/e - E-DCH retransmissions . 623g37.1.6a.4.1 MAC-es/e process handling . 623g37.1.6a.4.2 MAC-es/e maximum number of retransmissions 626g37.1.7 E-DCH MAC-i/is 6
34、28g37.1.7.1 MAC-i/is multiplexing (multiple PDUs from different LC in one TTI) . 628g37.1.7.2 MAC-i/is segmentation / Correct Usage of Segmentation Status Field 630g3ETSI ETSI TS 134 123-1 V12.3.0 (2016-05)73GPP TS 34.123-1 version 12.3.0 Release 127.1.7.3 Correct settings of MAC-i/is header fields
35、634g37.1.7.4 MAC-is/i transport block size selection/ UL QPSK 638g37.1.7.5 MAC-is/i transport block size selection/ UL 16QAM 647g37.1.7.6 MAC-is/i transport block size selection (1.28Mcps TDD) 654g37.1.8 E-DCH MAC-is/i for RACH procedure . 656g37.1.8.1 Release of common E-DCH resource when maximum r
36、esource allocation for E-DCH expires or uplink transmission ends for CCCH transmission. 656g37.1.8.2 Activation of HS-DPCCH based on the received SIB5/SIB5bis information . 661g37.1.8.3 DTCH/DCCH transmission - implicit common E-DCH resource release without receiving E-AGCH . 665g37.1.8.4 DTCH/DCCH
37、transmission explicit common E-DCH resource release by E-AGCH . 667g37.1.8.5 RACH procedure with both normal AIs and extended AIs (using E-AICH). . 670g37.1.8.6 DTCH/DCCH transmission - Implicit release with E-DCH transmission continuation backoff - Timer Based 675g37.1.8.6a DTCH/DCCH transmission -
38、 Implicit release with E-DCH transmission continuation backoff value set to “0” 679g37.1.8.7 Physical Channel Failure for EUL in CELL-FACH during initial access preamble . 683g37.1.8.8 Radio Link Failure for Enhanced UL in CELL-FACH with DTCH/DCCH active 686g37.1.8.9 CCCH transmission E-DCH access,
39、the UL transmission within the Scheduling Windows 688g37.1.8.10 DTCH/DCCH transmission with E-RUCCH access for dedicated control signalling or dedicated user data when dedicated E-RNTI is allocated 691g37.1.9 E-DCH MAC-is/i for Dual-Cell HSUPA 693g37.1.9.1 MAC-i/is multiplexing for Dual-Cell HSUPA 6
40、93g37.1.9.2 Happy bit setting and SI handling for Dual-Cell HSUPA . 696g37.1.9.3 Void. 702g37.1.9.4 Void. 702g37.1.9.5 Deactivation and activation of secondary uplink frequency using HS-SCCH orders . 702g37.1.10 Fallback to R99 PRACH in CELL_FACH . 706g37.1.10.1 Fallback to R99 PRACH in CELL_FACH /
41、Network indicates fallback to R99 PRACH on CCCH 706g37.1.10.2 Fallback to R99 PRACH in CELL_FACH / Network indicates fallback to R99 PRACH on DCCH . 713g37.1.11 HS-DSCH MAC-ehs with Multiflow . 717g37.1.11.1 Maximum number of re-ordering SDUs with inter-Node B operation on two cells on one frequency
42、 . 717g37.1.11.2 Maximum number of re-ordering SDUs with inter-Node B operation on three cells on two frequencies 719g37.2 RLC testing 720g37.2.0 General 720g37.2.0.1 Radio bearer setup . 720g37.2.1 Transparent mode . 721g37.2.1.1 Segmentation and reassembly . 721g37.2.2 Unacknowledged mode . 721g37
43、.2.2.1 General information for UM tests . 721g37.2.2.2 Segmentation and reassembly / Selection of 7 or 15 bit “Length Indicators“ . 721g37.2.2.3 Segmentation and reassembly / 7-bit “Length Indicators“ / Padding 723g37.2.2.4 Segmentation and Reassembly / 7-bit “Length Indicators“ / LI = 0 724g37.2.2.
44、5 Reassembly / 7-bit “Length Indicators“ / Invalid LI value 726g37.2.2.6 Reassembly / 7-bit “Length Indicators“ / LI value PDU size . 727g37.2.2.7 Reassembly / 7-bit “Length Indicators“ / First data octet LI . 728g37.2.2.8 Segmentation and reassembly / 15-bit “Length Indicators“ / Padding 730g37.2.2
45、.9 Segmentation and Reassembly / 15-bit “Length Indicators“ / LI = 0 731g37.2.2.10 Segmentation and reassembly / 15-bit “Length Indicators“ / One octet short LI 732g37.2.2.11 Reassembly / 15-bit “Length Indicators“ / Invalid LI value 733g37.2.2.12 Reassembly / 15-bit “Length Indicators“ / LI value P
46、DU size . 734g37.2.2.13 Reassembly / 15-bit “Length Indicators“ / First data octet LI . 736g37.2.2.14 Flexible handling of RLC PDU sizes for UM RLC in downlink 737g37.2.2.15 Flexible handling of RLC PDU sizes for UM RLC in uplink . 739g37.2.2a Unacknowledged mode (TDD MBSFN) (non-IMB) 742g37.2.2a.1
47、P-T-M Radio bearer setup . 742g37.2.2a.2 Reassembly / 7-bit “Length Indicators“ / Invalid LI value (TDD MBSFN) . 743g37.2.2a.3 Reassembly / 7-bit “Length Indicators“ / LI value PDU size (TDD MBSFN) 745g3ETSI ETSI TS 134 123-1 V12.3.0 (2016-05)83GPP TS 34.123-1 version 12.3.0 Release 127.2.2a.4 Reass
48、embly / 7-bit “Length Indicators“ / First data octet LI (TDD MBSFN) . 746g37.2.2a.5 Reassembly / 15-bit “Length Indicators“ / Invalid LI value (TDD MBSFN) 748g37.2.2a.6 Reassembly / 15-bit “Length Indicators“ / LI value PDU size (TDD MBSFN) 749g37.2.2a.7 Reassembly / 15-bit “Length Indicators“ / Fir
49、st data octet LI (TDD MBSFN) . 751g37.2.2b Unacknowledged mode (MBSFN IMB) . 752g37.2.2b.1 P-T-M Radio bearer setup . 752g37.2.2b.2 Reassembly / 7-bit “Length Indicators“ / Invalid LI value (MBSFN IMB) 753g37.2.2b.3 Reassembly / 7-bit “Length Indicators“ / LI value PDU size (MBSFN IMB) . 755g37.2.2b.4 Reassembly / 7-bit “Length Indicators“ / First data octet LI (MBSFN IMB) . 757g37.2.2b.5 Reassembly / 15-bit “Length Indicators“ / Invalid LI value (MBSFN IMB) 759g37.2.2b.6 Reassembly / 15-bit “Length Indicators“ / LI value PDU size (MBSFN IMB) . 760g37.2.2b.7 Reassembl
