1、 ETSI TS 136 106 V14.0.0 (2017-04) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); FDD repeater radio transmission and reception (3GPP TS 36.106 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 106 V14.0.0 (2017-04)13GPP TS 36.106 version 14.0.0 Release 14Reference RTS/T
2、SGR-0436106ve00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present docume
3、nt can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case
4、 of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the documen
5、t may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/port
6、al.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modifi
7、ed without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of
8、 its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 106 V14.0
9、.0 (2017-04)23GPP TS 36.106 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and ca
10、n be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETS
11、I IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword
12、 This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresp
13、onding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot
14、“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 106 V14.0.0 (2017-04)33GPP TS 36.106 version 14.0.0 Release
15、14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 8g34 General . 8g34.1 Relationship between Minimum Requirements and Test Re
16、quirements 8g34.2 Regional requirements 9g35 Operating bands and channel arrangement . 10g35.1 General . 10g35.2 Void 11g35.3 Void 11g35.4 Void 11g35.5 Operating bands 11g35.6 Channel bandwidth . 11g35.7 Channel arrangement 12g35.7.1 Channel spacing 12g35.7.2 Channel raster . 12g35.7.3 Carrier frequ
17、ency and EARFCN . 12g36 Output power 13g36.1 Minimum requirement 14g37 Frequency stability . 14g37.1 Minimum requirement 14g38 Out of band gain . 14g38.1 Minimum requirement 14g39 Unwanted emissions . 16g39.1 Operating band unwanted emissions 16g39.1.1 Operating band unwanted emissions (Category A)
18、16g39.1.1.1 Minimum Requirements 16g39.1.2 Operating band unwanted emissions (Category B) . 18g39.1.2.1 Minimum Requirement . 18g39.1.2.1.1 Category B requirements (Option 1) . 18g39.1.2.1.2 Category B requirements (Option 2) . 21g39.1.3 Additional requirements . 22g39.1.4. Protection of the BS rece
19、iver in the operating band . 25g39.1.4.1 Minimum Requirement . 25g39.2 Spurious emissions . 26g39.2.1 Mandatory requirements . 26g39.2.1.1 Spurious emissions (Category A) 26g39.2.1.1.1 Minimum Requirement . 26g39.2.1.2 Spurious emissions (Category B) 27g39.2.1.2.1 Minimum Requirement . 27g39.2.2 Co-
20、existence with other systems in the same geographical area 27g39.2.2.1 Minimum requirement 27g39.2.3 Co-location with base stations 34g39.2.3.1 Minimum Requirements 35g3ETSI ETSI TS 136 106 V14.0.0 (2017-04)43GPP TS 36.106 version 14.0.0 Release 1410 Error Vector Magnitude . 41g310.1 Downlink Error
21、Vector Magnitude. 41g310.1.1 Minimum requirement 41g310.2 Uplink Error Vector Magnitude . 41g310.2.1 Minimum requirement 41g311 Input Intermodulation . 42g311.1 General requirement . 42g311.1.1 Minimum requirement 42g311.2 Co-location with BS in other systems 42g311.2.1 Minimum requirement 42g311.3
22、Co-existence with other systems 48g311.3.1 Minimum requirement 48g312 Output intermodulation 53g312.1 Minimum requirement 53g313 Adjacent Channel Rejection Ratio (ACRR) . 55g313.1 Definitions and applicability 55g313.1.1 Minimum Requirements . 55g313.2 Co-existence with UTRA . 55g313.2.1. Minimum Re
23、quirements . 55g3Annex A (normative): Environmental requirements for the Repeater equipment 56g3Annex B (informative): Change history . 57g3History 59g3ETSI ETSI TS 136 106 V14.0.0 (2017-04)53GPP TS 36.106 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGen
24、eration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release dat
25、e and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technic
26、al enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 106 V14.0.0 (2017-04)63GPP TS 36.106 version 14.0.0 Release 141 Scope The present document establishes the minimum RF characteristics of E
27、-UTRA FDD Repeater. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specif
28、ic reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present
29、document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 ITU-R Recommendation SM.329, “Unwanted emissions in the spurious domain“. 3 ITU-R Recommendation M.1545: “Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-
30、2000”. 4 3GPP TS 36.143: “Evolved Universal Terrestrial Radio Access (E-UTRA); FDD Repeater conformance testing” 5 3GPP TR 25.942: “RF system scenarios“. 6 3GPP TS.36.104: “E-UTRA Base Station (BS) radio transmission and reception“. 7 IEC 60721-3-3 (2002): “Classification of environmental conditions
31、 - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weather protected locations“. 8 IEC 60721-3-4 (1995): “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities -
32、Section 4: Stationary use at non-weather protected locations“. 9 CEPT ECC Decision (13)03, “The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of
33、the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Carrier: The modulated waveform conveying the E-UTRA or UTRA physical channels Channel b
34、andwidth: The RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth configured in the uplink or downlink of a cell. The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. Channel edge: The lowest and highest freq
35、uency of the E-UTRA carrier, separated by the channel bandwidth. Donor coupling loss: is the coupling loss between the repeater and the donor base station. ETSI ETSI TS 136 106 V14.0.0 (2017-04)73GPP TS 36.106 version 14.0.0 Release 14Downlink: Signal path where base station transmits and mobile rec
36、eives. Downlink operating band: The part of the operating band designated for downlink. Maximum output power, Pmax: This is the mean power level per carrier measured at the antenna connector of the Repeater in specified reference condition. Operating band: A frequency range in which E-UTRA operates
37、(paired or unpaired), that is defined with a specific set of technical requirements. NOTE1: The operating band(s) for an E-UTRA Repeater is declared by the manufacturer according to the designations in clause 5.5 table 5.5-1. NOTE2: Unless specified, operating band refers to the uplink operating ban
38、d and downlink operating band. Output power, Pout: This is the mean power of one carrier at maximum repeater gain delivered to a load with resistance equal to the nominal load impedance of the transmitter. Pass band: The frequency range in which the repeater operates in with operational configuratio
39、n. This frequency range can correspond to one or several consecutive nominal channels. If they are not consecutive each subset of channels shall be considered as an individual pass band. A repeater can have one or several pass bands. Rated output power: Rated output power of the repeater is the mean
40、 power level per carrier that the manufacturer has declared to be available at the antenna connector. Repeater: A device that receives, amplifies and transmits the radiated or conducted RF carrier both in the downlink direction (from the base station to the mobile area) and in the uplink direction (
41、from the mobile to the base station) In operating bands with one exclusive link direction, only the dedicated link direction is repeated. In operating bands specified with only down-link or up-link, only the up-link or down-link as specified for the operating band is repeated. Transmission bandwidth
42、: Bandwidth of an instantaneous transmission from a UE or BS, measured in Resource Block units. Transmission bandwidth configuration: The highest transmission bandwidth allowed for uplink or downlink in a given channel bandwidth, measured in Resource Block units. Uplink: Signal path where mobile tra
43、nsmits and base station receives. Uplink operating band: The part of the operating band designated for uplink. 3.2 Symbols For the purposes of the present document, the following symbols apply: BWChannelChannel bandwidth BWConfigTransmission bandwidth configuration, expressed in MHz, where BWConfig=
44、 NRBx 180 kHz in the uplink and BWConfig= 15 kHz + NRBx 180 kHz in the downlink. BWMeasMeasurement bandwidth BWSignalBandwidth of the repeater input signal filling the repeater pass band FDL_low The lowest frequency of the downlink operating band FDL_high The highest frequency of the downlink operat
45、ing band FfilterFilter centre frequency FUL_low The lowest frequency of the uplink operating band FUL_high The highest frequency of the uplink operating band f_offset_PB Distance from the channel edge frequency of the first or last channel in the pass band NDLDownlink EARFCN NOffs-DLOffset used for
46、calculating downlink EARFCN NOffs-ULOffset used for calculating uplink EARFCN NRBTransmission bandwidth configuration, expressed in units of resource blocks NULUplink EARFCN PEM,B32,ind Declared emission level in Band 32, ind=a, b, c, d, e PEM,NDeclared emission level for channel N ETSI ETSI TS 136
47、106 V14.0.0 (2017-04)83GPP TS 36.106 version 14.0.0 Release 14Pmax Maximum output power Pout Output power 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over
48、the definition of the same abbreviation, if any, in TR 21.905 1. ACRR Adjacent Channel Rejection Ratio BS Base Station DTT Digital Terrestrial Television EARFCN E-UTRA Absolute Radio Frequency Channel Number EIRP Effective Isotropic Radiated Power EVM Error Vector Magnitude IDFT Inverse Discrete Fou
49、rier Transform PB Pass Band TBD To Be Defined 4 General 4.1 Relationship between Minimum Requirements and Test Requirements The Minimum Requirements given in this specification make no allowance for measurement uncertainty. The test specification TS 36.143 4 Annex B defines Test Tolerances. These Test Tolerances are individually calculated for each test. The Test Tolerances are used to relax the Minimum Requirements in this specification to create Test Requirements. The measurement results returned by the Test System are compared - without any modi
