1、 ETSI TS 1Evolved Universal TBase Station(3GPP TS 36.1TECHNICAL SPECIFICATION136 141 V13.6.0 (2017LTE; l Terrestrial Radio Access (E-ion (BS) conformance testing .141 version 13.6.0 Release 1317-01) UTRA); g 13) ETSI ETSI TS 136 141 V13.6.0 (2017-01)13GPP TS 36.141 version 13.6.0 Release 13Reference
2、 RTS/TSGR-0436141vd60 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present
3、document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. I
4、n case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the d
5、ocument may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https
6、:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be
7、modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the bene
8、fit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 141 V13.6.0 (2017-01)23GPP TS 36.141 version 13.6.0 Release
9、 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Prope
10、rty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR sear
11、ches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produc
12、ed by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference betw
13、een GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2
14、 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 141 V13.6.0 (2017-01)33GPP TS 36.141 version 13.6.0 Release 13Contents Intellectual Property Rights 2g3Forewor
15、d . 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 References 16g33 Definitions, symbols and abbreviations . 17g33.1 Definitions 17g33.2 Symbols 20g33.3 Abbreviations . 21g34 General test conditions and declarations 23g34.1 Measurement uncertainties and Test Requirements . 23g34.1.1 Gene
16、ral 23g34.1.2 Acceptable uncertainty of Test System . 23g34.1.2.1 Measurement of transmitter 24g34.1.2.2 Measurement of receiver . 25g34.1.2.3 Measurement of performance requirement . 30g34.1.3 Interpretation of measurement results . 34g34.2 Base station classes 35g34.3 Regional requirements 35g34.4
17、 Selection of configurations for testing 37g34.5 BS Configurations 37g34.5.1 Transmit configurations 37g34.5.1.1 Transmission with multiple transmitter antenna connectors . 37g34.5.2 Receive configurations . 38g34.5.2.1 Reception with multiple receiver antenna connectors, receiver diversity . 38g34.
18、5.3 Duplexers 38g34.5.4 Power supply options 39g34.5.5 Ancillary RF amplifiers 39g34.5.6 BS with integrated Iuant BS modem 40g34.5.7 BS using antenna arrays 40g34.5.7.1 Receiver tests 40g34.5.7.2 Transmitter tests 40g34.6 Manufacturer“s declarations of regional and optional requirements 41g34.6.1 Op
19、erating band and frequency range 41g34.6.2 Channel bandwidth . 41g34.6.3 Base station output power . 41g34.6.4 Spurious emissions Category 41g34.6.5 Additional operating band unwanted emissions . 42g34.6.6 Co-existence with other systems . 42g34.6.7 Co-location with other base stations . 42g34.6.8 M
20、anufacturers declarations of supported RF configurations . 42g34.6.9 NB-IoT sub-carrier spacing 44g34.6.10 NB-IoT power dynamic range 44g34.7 Specified frequency range and supported channel bandwidth 44g34.7.1 Base Station RF Bandwidth position for multi-carrier and/or CA testing 45g34.7.2 Aggregate
21、d Channel Bandwidth position for Contiguous CA occupied bandwidth testing . 45g34.7.3 NB-IoT testing 46g34.8 Format and interpretation of tests . 46g34.9 Applicability of requirements . 47g34.10 Test configurations for multi-carrier and/or CA operation . 47g34.10.1 ETC1: Contiguous spectrum operatio
22、n . 47g34.10.1.1 ETC1 generation . 47g3ETSI ETSI TS 136 141 V13.6.0 (2017-01)43GPP TS 36.141 version 13.6.0 Release 134.10.1.2 ETC1 power allocation . 48g34.10.2 ETC2: Contiguous CA occupied bandwidth . 48g34.10.2.1 ETC2 generation . 48g34.10.2.2 ETC2 power allocation . 48g34.10.3 ETC3: Non-contiguo
23、us spectrum operation . 48g34.10.3.1 ETC3 generation . 49g34.10.3.2 ETC3 power allocation . 49g34.10.3.24 VOID . 49g34.10.4 ETC4: Multi-band test configuration for full carrier allocation 49g34.10.4.1 ETC4 generation . 49g34.10.4.2 ETC4 power allocation . 50g34.10.5 ETC5: Multi-band test configurati
24、on with high PSD per carrier 50g34.10.5.1 ETC5 generation . 50g34.10.5.2 ETC5 power allocation . 50g34.10.6 ETC6: NB-IoT standalone multi-carrier operation . 50g34.10.6.1 ETC6 generation . 51g34.10.6.2 ETC6 power allocation . 51g34.10.7 ETC7: E-UTRA and NB-IoT standalone multi-carrier operation . 51
25、g34.10.7.1 ETC7 generation . 51g34.10.7.2 ETC7 power allocation . 51g34.10.8 ETC8: E-UTRA and NB-IoT in-band multi-carrier operation 51g34.10.8.1 ETC8 generation . 51g34.10.8.2 ETC8 power allocation . 52g34.10.9 ETC9: E-UTRA and NB-IoT guard-band multi-carrier operation 52g34.10.9.1 ETC9 generation
26、. 52g34.10.9.2 ETC9 power allocation . 52g34.11 Applicability of test configurations 52g34.12 Requirements for BS capable of multi-band operation 59g35 Operating bands and channel arrangement . 59g35.1 General . 59g35.2 Void 59g35.3 Void 59g35.4 Void 59g35.5 Operating bands 59g35.6 Channel bandwidth
27、 . 71g35.7 Channel arrangement 75g35.7.1 Channel spacing 75g35.7.1A CA Channel spacing . 75g35.7.2 Channel raster . 76g35.7.3 Carrier frequency and EARFCN . 76g35.8 Requirements for contiguous and non-contiguous spectrum 78g36 Transmitter characteristics . 79g36.1 General . 79g36.1.1 E-UTRA Test Mod
28、els . 79g36.1.1.1 E-UTRA Test Model 1.1 (E-TM1.1). 79g36.1.1.2 E-UTRA Test Model 1.2 (E-TM1.2). 80g36.1.1.3 E-UTRA Test Model 2 (E-TM2) 83g36.1.1.3a E-UTRA Test Model 2a (E-TM2a) . 84g36.1.1.4 E-UTRA Test Model 3.1 (E-TM3.1). 84g36.1.1.4a E-UTRA Test Model 3.1a (E-TM3.1a) . 85g36.1.1.5 E-UTRA Test M
29、odel 3.2 (E-TM3.2). 85g36.1.1.6 E-UTRA Test Model 3.3 (E-TM3.3). 88g36.1.2 Data content of Physical channels and Signals for E-TM . 91g36.1.2.1 Reference signals 91g36.1.2.2 Primary Synchronization signal 91g36.1.2.3 Secondary Synchronization signal 91g36.1.2.4 PBCH 91g36.1.2.5 PCFICH. 92g36.1.2.6 P
30、HICH . 92g36.1.2.7 PDCCH . 92g3ETSI ETSI TS 136 141 V13.6.0 (2017-01)53GPP TS 36.141 version 13.6.0 Release 136.1.2.8 PDSCH 92g36.1.3 NB-IoT Test Model 93g36.1.4 Data content of Physical channels and Signals for N-TM 93g36.1.4.1 Reference signals 94g36.1.4.2 Synchronization signals 94g36.1.4.3 NPBCH
31、 . 94g36.1.4.4 NPDCCH 94g36.1.4.5 NPDSCH. 94g36.1.5 Test Model for NB-IoT guard band operation 95g36.1.6 Test Model for NB-IoT in-band operation 95g36.2 Base station output power 95g36.2.1 Definition and applicability 95g36.2.2 Minimum Requirement . 96g36.2.3 Test purpose 96g36.2.4 Method of test .
32、96g36.2.4.1 Initial conditions . 96g36.2.4.2 Procedure 97g36.2.5 Test Requirements 97g36.2.6 Home BS output power for adjacent UTRA channel protection. 98g36.2.6.1 Definition and applicability . 98g36.2.6.2 Minimum Requirement . 99g36.2.6.3 Test purpose 99g36.2.6.4 Method of test . 99g36.2.6.4.1 Ini
33、tial conditions 99g36.2.6.4.2 Procedure . 99g36.2.6.5 Test Requirements . 100g36.2.7 Home BS output power for adjacent E-UTRA channel protection . 100g36.2.7.1 Definition and applicability . 100g36.2.7.2 Minimum Requirement . 101g36.2.7.3 Test purpose 101g36.2.7.4 Method of test . 101g36.2.7.4.1 Ini
34、tial conditions 101g36.2.7.4.2 Procedure . 101g36.2.7.5 Test Requirements . 102g36.2.8 Home BS output power for co-channel E-UTRA protection 102g36.2.8.1 Definition and applicability . 102g36.2.8.2 Minimum Requirement . 104g36.2.8.3 Test purpose 104g36.2.8.4 Method of test . 104g36.2.8.4.1 Initial c
35、onditions 104g36.2.8.4.2 Procedure . 104g36.2.8.5 Test Requirements . 105g36.3 Output power dynamics 105g36.3.1 RE Power control dynamic range . 105g36.3.1.1 Definition and applicability . 105g36.3.1.2 Minimum Requirement . 105g36.3.1.3 Method of test . 105g36.3.2 Total power dynamic range 106g36.3.
36、2.1 Definition and applicability . 106g36.3.2.2 Minimum Requirement . 106g36.3.2.3 Test purpose 106g36.3.2.4 Method of test . 106g36.3.2.4.1 Initial conditions 106g36.3.2.4.2 Procedure . 106g36.3.2.5 Test Requirement 106g36.3.3 NB-IoT RB power dynamic range for in-band or guard band operation 107g36
37、.3.3.1 Definition and applicability . 107g36.3.2.2 Minimum Requirement . 107g36.3.3.3 Test purpose 107g36.3.3.4 Method of test . 107g36.3.3.5 Test Requirement 107g36.4 Transmit ON/OFF power . 107g3ETSI ETSI TS 136 141 V13.6.0 (2017-01)63GPP TS 36.141 version 13.6.0 Release 136.4.1 Transmitter OFF po
38、wer 108g36.4.1.1 Definition and applicability . 108g36.4.1.2 Minimum Requirement . 108g36.4.1.3 Test purpose 108g36.4.1.4 Method of test . 108g36.4.1.4.1 Void . 108g36.4.1.4.2 Void . 108g36.4.1.5 Test requirement . 108g36.4.2 Transmitter transient period 108g36.4.2.1 Definition and applicability . 1
39、08g36.4.2.2 Minimum Requirement . 109g36.4.2.3 Test purpose 109g36.4.2.4 Method of test . 109g36.4.2.4.1 Initial conditions 109g36.4.2.4.2 Procedure . 109g36.4.2.5 Test requirement . 110g36.5 Transmitted signal quality 110g36.5.1 Frequency error . 110g36.5.1.1 Definition and applicability . 110g36.5
40、.1.2 Minimum Requirement . 110g36.5.1.3 Test purpose 110g36.5.1.4 Method of test . 110g36.5.1.5 Test requirement . 110g36.5.2 Error Vector Magnitude 111g36.5.2.1 Definition and applicability . 111g36.5.2.2 Minimum Requirement . 111g36.5.2.3 Test purpose 111g36.5.2.4 Method of test . 111g36.5.2.4.1 I
41、nitial conditions 111g36.5.2.4.2 Procedure . 111g36.5.2.5 Test requirement . 112g36.5.3 Time alignment error 113g36.5.3.1 Definition and applicability . 113g36.5.3.2 Minimum Requirement . 113g36.5.3.3 Test Purpose 113g36.5.3.4 Method of Test 113g36.5.3.4.1 Initial Conditions . 113g36.5.3.4.2 Procedu
42、re . 114g36.5.3.5 Test Requirement 114g36.5.4 DL RS power 115g36.5.4.1 Definition and applicability . 115g36.5.4.2 Minimum Requirement . 115g36.5.4.3 Test purpose 115g36.5.4.4 Method of test . 115g36.5.4.4.1 Initial conditions 115g36.5.4.4.2 Procedure . 115g36.5.4.5 Test requirement . 115g36.6 Unwan
43、ted emissions . 116g36.6.1 Occupied bandwidth . 116g36.6.1.1 Definition and applicability . 116g36.6.1.2 Minimum Requirements 116g36.6.1.3 Test purpose 116g36.6.1.4 Method of test . 116g36.6.1.4.1 Initial conditions 116g36.6.1.4.2 Procedure . 117g36.6.1.5 Test requirements 118g36.6.2 Adjacent Channe
44、l Leakage power Ratio (ACLR) 118g36.6.2.1 Definition and applicability . 118g36.6.2.2 Minimum Requirement . 118g36.6.2.3 Test purpose 118g36.6.2.4 Method of test . 119g36.6.2.4.1 Initial conditions 119g3ETSI ETSI TS 136 141 V13.6.0 (2017-01)73GPP TS 36.141 version 13.6.0 Release 136.6.2.4.2 Procedur
45、e . 119g36.6.2.5 Test Requirement 120g36.6.2.6 Cumulative ACLR test requirement in non-contiguous spectrum 122g36.6.3 Operating band unwanted emissions 124g36.6.3.1 Definition and applicability . 124g36.6.3.2 Minimum Requirement . 125g36.6.3.3 Test purpose 125g36.6.3.4 Method of test . 125g36.6.3.4.
46、1 Initial conditions 125g36.6.3.4.2 Procedure . 125g36.6.3.5 Test requirement . 126g36.6.3.5.1 Test requirements for Wide Area BS (Category A). 127g36.6.3.5.2 Test requirements for Wide Area BS (Category B) . 131g36.6.3.5.2A Test requirements for Local Area BS (Category A and B) 137g36.6.3.5.2B Test
47、 requirements for Home BS (Category A and B) 139g36.6.3.5.2C Test requirements for Medium Range BS (Category A and B) . 141g36.6.3.5.2D Minimum requirements for Local Area and Medium Range BS in Band 46 (Category A and B) . 145g36.6.3.5.2E Minimum requirements for stand-alone NB-IoT Wide Area BS . 1
48、46g36.6.3.5.3 Additional requirements 147g36.6.4 Transmitter spurious emissions . 150g36.6.4.1 Definition and applicability . 150g36.6.4.2 Minimum Requirements 151g36.6.4.3 Test Purpose 151g36.6.4.4 Method of Test 151g36.6.4.4.1 Initial conditions 151g36.6.4.4.2 Procedure . 151g36.6.4.5 Test require
49、ments 152g36.6.4.5.1 Spurious emissions (Category A) 152g36.6.4.5.2 Spurious emissions (Category B) 152g36.6.4.5.3 Protection of the BS receiver of own or different BS 153g36.6.4.5.4 Co-existence with other systems in the same geographical area . 153g36.6.4.5.5 Co-location with other base stations 166g36.7 Transmitter intermodulation . 174g36.7.1 Definition and applicability 174g36.7.2 Minimum Requirement . 175g36.7.2A Additional requirement for Band 41 . 175g36.7.3 Test purpose 175g36.7.4 Method of test . 175g36.7.4.1 Initial conditions . 175g36.7.4.2 Procedures . 175g36.7.
