1、 ETSI TS 1Evolved Universal TServices pro(3GPP TS 36.3TECHNICAL SPECIFICATION136 302 V13.4.0 (2017LTE; l Terrestrial Radio Access (E-rovided by the physical layer .302 version 13.4.0 Release 1317-02) UTRA); er 13) ETSI ETSI TS 136 302 V13.4.0 (2017-02)13GPP TS 36.302 version 13.4.0 Release 13Referen
2、ce RTS/TSGR-0236302vd40 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The presen
3、t document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI.
4、 In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the
5、 document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: htt
6、ps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not b
7、e modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the be
8、nefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 302 V13.4.0 (2017-02)23GPP TS 36.302 version 13.4.0 Relea
9、se 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Pro
10、perty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR se
11、arches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword The present document may refer to technical spe
12、cifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. M
13、odal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ ar
14、e NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 302 V13.4.0 (2017-02)33GPP TS 36.302 version 13.4.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbrevia
15、tions . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Void 8g34.1 Void 8g34.2 Void 8g35 Services and functions of the physical layer 8g35.1 General . 8g35.2 Overview of L1 functions . 8g35.3 Void 9g36 Model of physical layer of the UE . 9g36.1 Uplink model 9g36.1.1 Uplink Shared Channel . 9g36.1.2
16、Random-access Channel . 10g36.2 Downlink model . 10g36.2.1 Downlink-Shared Channel 10g36.2.2 Broadcast Channel 12g36.2.3 Paging Channel . 13g36.2.4 Multicast Channel. 14g36.3 Sidelink model 15g36.3.1 Sidelink Broadcast Channel 15g36.3.2 Sidelink Discovery Channel . 16g36.3.3 Sidelink Shared Channel
17、. 17g37 Void 18g38 Parallel transmission of simultaneous Physical Channels and SRS . 18g38.1 Uplink . 19g38.2 Downlink 21g38.3 Sidelink 26g39 Measurements provided by the physical layer . 27g39.1 Void 27g39.2 UE Measurements 27g39.3 E-UTRAN Measurements 27g3Annex A (informative): Change history . 28
18、g3History 30g3ETSI ETSI TS 136 302 V13.4.0 (2017-02)43GPP TS 36.302 version 13.4.0 Release 13Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may chan
19、ge following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 prese
20、nted to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in
21、the document. ETSI ETSI TS 136 302 V13.4.0 (2017-02)53GPP TS 36.302 version 13.4.0 Release 131 Scope The present document is a technical specification of the services provided by the physical layer of E-UTRA to upper layers. 2 References The following documents contain provisions which, through refe
22、rence in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version a
23、pplies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void 2 Void 3 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 4 Void 5 Void 6 Void
24、7 Void 8 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation“. 9 Void 10 Void 11 3GPP TS 36.214: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer; Measurements“. 12 3GPP TS 36.321: “Evolved Universal Terrestrial Radio Access (E-U
25、TRA); Medium Access Control (MAC) protocol specification“. 13 3GPP TS 36.306: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio access capabilities“. 14 3GPP TS 23.303: “Technical Specification Group Services and System Aspects; Proximity-based services (ProSe)“. 15 Voi
26、d ETSI ETSI TS 136 302 V13.4.0 (2017-02)63GPP TS 36.302 version 13.4.0 Release 133 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 3 and the following apply. A term defined in the present document takes precedence o
27、ver the definition of the same term, if any, in TR 21.905 3. Carrier frequency: center frequency of the cell. Frequency layer: set of cells with the same carrier frequency. NB-IoT: NB-IoT allows access to network services via E-UTRA with a channel bandwidth limited to 180 kHz. Sidelink: UE to UE int
28、erface for sidelink communication and sidelink discovery. The sidelink corresponds to the PC5 interface as defined in TS 23.303 14. Sidelink communication: AS functionality enabling ProSe Direct Communication as defined in TS 23.303 14, between two or more nearby UEs, using E-UTRA technology but not
29、 traversing any network node. Sidelink discovery: AS functionality enabling ProSe Direct Discovery as defined in TS 23.303 14, using E-UTRA technology but not traversing any network node. Timing Advance Group: See the definition in 12. 3.2 Abbreviations For the purposes of the present document, the
30、abbreviations given in TR 21.905 3 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 3. For the purposes of the present document, the following abbreviations apply: ACK Acknowledgement ARQ Auto
31、matic Repeat Request BCCH Broadcast Control Channel BCH Broadcast Channel BL Bandwidth reduced Low complexity BLER Block Error Rate CG Cell Group CMAS Commercial Mobile Alert System CP Cyclic Prefix C-plane Control Plane CRC Cyclic Redundancy Check CSI Channel State Information DC Dual Connectivity
32、DCCH Dedicated Control Channel DL Downlink DRX Discontinuous Reception DTCH Dedicated Traffic Channel DTX Discontinuous Transmission eNB E-UTRAN NodeB eIMTA Enhanced Interference Management and Traffic Adaptation EPDCCH Enhanced physical downlink control channel E-UTRA Evolved UTRA E-UTRAN Evolved U
33、TRAN FDD Frequency Division Duplex FDM Frequency Division Multiplexing FS Frame Structure GERAN GSM EDGE Radio Access Network GSM Global System for Mobile communication ETSI ETSI TS 136 302 V13.4.0 (2017-02)73GPP TS 36.302 version 13.4.0 Release 13HARQ Hybrid ARQ LAA Licensed-Assisted Access LTE Lon
34、g Term Evolution MAC Medium Access Control MBMS Multimedia Broadcast Multicast Service MBSFN Multimedia Broadcast multicast service Single Frequency Network MCCH Multicast Control Channel MCH Multicast Channel MCS Modulation and Coding Scheme MIMO Multiple Input Multiple Output MTCH Multicast Traffi
35、c Channel NACK Negative AcknowledgementNB-IoT Narrow Band Internet of Things NPBCH Narrow Band Physical Broadcast Channel NPDCCH Narrow Band Physical Downlink Control Channel NPDSCH Narrow Band Physical Downlink Shared Channel NPRACH Narrow Band Physical Random Access Channel NPUSCH Narrow Band Phys
36、ical Uplink Shared Channel OFDM Orthogonal Frequency Division Multiplexing OFDMA Orthogonal Frequency Division Multiple Access PBCH Physical broadcast channel PDCCH Physical downlink control channel PDSCH Physical downlink shared channel PHY Physical layer PMCH Physical multicast channel PRACH Physi
37、cal random access channel PRB Physical Resource Block ProSe Proximity based Services PSBCH Physical Sidelink Broadcast CHannel PSCCH Physical Sidelink Control Channel PSCell Primary SCell PSDCH Physical Sidelink Discovery Channel PSSCH Physical Sidelink Shared CHannel PUCCH Physical uplink control c
38、hannel PUSCH Physical uplink shared channel QAM Quadrature Amplitude Modulation RACH Random Access Channel RF Radio Frequency RRC Radio Resource Control SAP Service Access Point SBCCH Sidelink Broadcast Control CHannel SC-FDMA Single Carrier Frequency Division Multiple Access SCell Secondary Cell SC
39、-PTM Single Cell Point to Multipoint SL-BCH Sidelink Broadcast Channel SL-DCH Sidelink Discovery ChannelSL-SCH Sidelink Shared Channel SRS Sounding Reference Symbol STCH Sidelink Traffic Channel TAG Timing Advance GroupTB Transport BlockTDD Time Division Duplex TTI Transmission Time Interval UE User
40、 Equipment UL Uplink UMTS Universal Mobile Telecommunication System U-plane User plane UTRA Universal Terrestrial Radio Access UTRAN Universal Terrestrial Radio Access Network ETSI ETSI TS 136 302 V13.4.0 (2017-02)83GPP TS 36.302 version 13.4.0 Release 134 Void 4.1 Void 4.2 Void 5 Services and funct
41、ions of the physical layer 5.1 General The physical layer offers data transport services to higher layers. The access to these services is through the use of transport channels via the MAC sub-layer. A transport block is defined as the data delivered by MAC layer to the physical layer and vice versa
42、. Transport blocks are delivered once every TTI. 5.2 Overview of L1 functions The physical layer offers data transport services to higher layers. The access to these services is through the use of a transport channel via the MAC sub-layer. The physical layer is expected to perform the following func
43、tions in order to provide the data transport service: - Error detection on the transport channel and indication to higher layers - FEC encoding/decoding of the transport channel - Hybrid ARQ soft-combining - Rate matching of the coded transport channel to physical channels - Mapping of the coded tra
44、nsport channel onto physical channels - Power weighting of physical channels - Modulation and demodulation of physical channels - Frequency and time synchronisation - Radio characteristics measurements and indication to higher layers - Multiple Input Multiple Output (MIMO) antenna processing - Trans
45、mit Diversity (TX diversity) - Beamforming - RF processing. L1 functions are modelled for each transport channel in subclauses 6.1, 6.2 and 6.3. ETSI ETSI TS 136 302 V13.4.0 (2017-02)93GPP TS 36.302 version 13.4.0 Release 135.3 Void 6 Model of physical layer of the UE The E-UTRA physical-layer model
46、 captures those characteristics of the E-UTRA physical-layer that are relevant from the point-of-view of higher layers. More specifically, the physical-layer model captures: - The structure of higher-layer data being passed down to or up from the physical layer; - The means by which higher layers ca
47、n configure the physical layer; - The different indications (error indications, channel-quality indications, etc.) that are provided by the physical layer to higher layers; - Other (non-transport-channel-based) higher-layer peer-to-peer signalling supported by the physical layer. 6.1 Uplink model 6.
48、1.1 Uplink Shared Channel The physical-layer model for Uplink Shared Channel transmission is described based on the corresponding physical-layer-processing chain, see Figure 6.1.1-1. Processing steps that are relevant for the physical-layer model, e.g. in the sense that they are configurable by high
49、er layers, are highlighted in blue. It should be noted that, in the cases of PUSCH and NPUSCH, the scheduling decision is fully done at the network side. The uplink transmission control in the UE then configures the uplink physical-layer processing, based on uplink transport-format and resource-assignment information received on the downlink. - Higher-layer data passed to/from the physical layer - One transport block of dynamic size delivered to the physical layer once every TTI. - CRC and transport-block-error indication
