1、 ETSI TS 136 456 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); SLm interface general aspects and principles (3GPP TS 36.456 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 456 V14.0.0 (2017-
2、04)13GPP TS 36.456 version 14.0.0 Release 14Reference RTS/TSGR-0336456ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfect
3、ure de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be m
4、odified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat
5、. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please
6、 send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permis
7、sion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the
8、 ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registe
9、red and owned by the GSM Association. ETSI ETSI TS 136 456 V14.0.0 (2017-04)23GPP TS 36.456 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any
10、, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on
11、 the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or ma
12、y be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities
13、. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “shoul
14、d not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS
15、136 456 V14.0.0 (2017-04)33GPP TS 36.456 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 5g33.3 Abbreviations . 5g33.4 Spec
16、ification notations . 6g34 General aspects . 6g34.1 E-UTRAN UTDOA architecture 6g34.2 SLm interface general principles 7g34.3 SLm interface specification objectives . 7g34.4 SLm interface capabilities 7g34.5 SLm interface characteristics . 8g34.5.1 Use of SCTP . 8g35 Functions of the SLm interface p
17、rotocol 8g35.1 General . 8g35.2 SLm link management function . 8g35.3 SLm interface management function 8g35.4 SLm location function 8g36 SLm interface protocol structure 8g36.1 General . 8g36.2 SLmAP . 9g37 Other SLm interface specifications 9g37.1 E-UTRAN SLm interface: layer 1 (3GPP TS 36.457) .
18、9g37.2 E-UTRAN SLm interface: signalling transport (3GPP TS 36.458) . 9g37.3 E-UTRAN SLm Interface: SLmAP Specification (3GPP TS 36.459) . 9 g3Annex A (informative): Change history . 10g3History 11g3ETSI ETSI TS 136 456 V14.0.0 (2017-04)43GPP TS 36.456 version 14.0.0 Release 14Foreword This Technica
19、l Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by th
20、e TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is increme
21、nted for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 456 V14.0.0 (2017-04)53GPP TS 36.456 version 14.0.0 Release 141 Scope The present document
22、is an introduction to the 3GPP TS 36.45x series of technical specifications that define the SLm interface for the interconnection of the Evolved Serving Mobile Location Centre (E-SMLC) to the Location Measurement Unit (LMU) components of the Evolved Universal Terrestrial Radio Access Network (E-UTRA
23、N). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, su
24、bsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP
25、 TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.305: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Architecture description“. 3 3GPP TS 36.457: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); SLm interface layer 1“. 4 3GPP TS 36.458: “Evolved Universal
26、Terrestrial Radio Access Network (E-UTRAN); SLm interface signalling transport“. 5 3GPP TS 36.459: “Evolved Universal Terrestrial Access (E-UTRA); SLm interface Application Protocol (SLmAP)“. 6 IETF RFC 4960 (2007-09): “Stream Control Transmission Protocol“. 3 Definitions, symbols and abbreviations
27、3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. 3.2 Symbols For the purposes of the present document
28、, the following symbols apply: 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. E-SMLC E-U
29、TRAN Serving Mobile Location Centre eNB E-UTRAN Node B EPC Evolved Packet Core ETSI ETSI TS 136 456 V14.0.0 (2017-04)63GPP TS 36.456 version 14.0.0 Release 14EPS Evolved Packet System E-UTRAN Evolved UTRAN IP Internet ProtocolLMU Location Measurement Unit LTE Long Term Evolution MME Mobility Managem
30、ent Entity O - the SLm interface shall support the exchange of signalling information between the LMU and E-SMLC; - from a logical standpoint, the SLm is a point-to-point interface between an LMU within the E-UTRAN and an E-SMLC in the EPC. A point-to-point logical interface should be feasible even
31、in the absence of a physical direct connection between the LMU and E-SMLC. 4.3 SLm interface specification objectives The SLm interface specification shall facilitate the following: - inter-connection of E-SMLCs with LMUs supplied by different manufacturers; - separation of SLm interface Radio Netwo
32、rk functionality and Transport Network functionality to facilitate introduction of future technology. 4.4 SLm interface capabilities The SLm interface supports: - procedures to establish, maintain and release connections between the E-SMLC and LMUs; - the separation of each LMU on the protocol level
33、 for specific signalling management; - location services by transferring location requests from the E-SMLC to LMUs, and UL RTOA measurements from LMUs to E-SMLC; ETSI ETSI TS 136 456 V14.0.0 (2017-04)83GPP TS 36.456 version 14.0.0 Release 144.5 SLm interface characteristics 4.5.1 Use of SCTP The SCT
34、P (IETF RFC 4960 7) is used to support the exchange of SLm Application Protocol (SLmAP) signalling messages between an LMU and an E-SMLC. 5 Functions of the SLm interface protocol 5.1 General The following sections describe the functions to fulfil the SLm interface capabilities. 5.2 SLm link managem
35、ent function The SLm signalling link management function provides a reliable transfer of the signalling between LMU and E-SMLC. 5.3 SLm interface management function The error indication function is used by the LMU (respectively the E-SMLC) to indicate to the E-SMLC (respectively the LMU) that a log
36、ical error has occurred. The reset procedure is used to initialize the peer entity after node setup and after a failure event has occurred. This procedure can be initiated by the E-SMLC or the LMU. The information about the LMU capabilities after a reset is preserved in the E-SMLC. The SLm Setup pro
37、cedure allows the exchange of application level data, e.g. capability, needed for the LMU and E-SMLC to interoperate correctly on the SLm interface. This procedure is originated by the LMU only and initiates the setup of the SLmAP contexts to the E-SMLC. 5.4 SLm location function The location functi
38、on is used by the E-SMLC to request the LMU to perform UL RTOA measurements. The LMU reports UL RTOA measurements back to the requesting E-SMLC. 6 SLm interface protocol structure Editors Note: Protocol Structure following the structure defined in TS 36.305 2. 6.1 General The network signalling over
39、 SLm consists of the SLm Application Protocol (SLmAP). The SLmAP consists of mechanisms to handle all procedures between the E-SMLC in the EPC and LMUs in the E-UTRAN. Over the SLm interface the SLmAP protocol is, e.g., used to: - Request LMUs to perform UL RTOA measurements of target UE SRS transmi
40、ssions. - Transfer of completed UL RTOA measurements from the LMU to the E-SMLC. ETSI ETSI TS 136 456 V14.0.0 (2017-04)93GPP TS 36.456 version 14.0.0 Release 146.2 SLmAP Figure 6.1 shows the protocol structure for SLmAP, following the structure described in TS 36.305 2. Figure 6.1: Interface protoco
41、l structure for SLmAP The Transport Network Layer is based on IP transport, comprising SCTP on top of IP. 7 Other SLm interface specifications Editors Note: Description of the other related specifications. 7.1 E-UTRAN SLm interface: layer 1 (3GPP TS 36.457) 3GPP TS 36.457 3 specifies the physical la
42、yer technologies that may be used to support the SLm interface. 7.2 E-UTRAN SLm interface: signalling transport (3GPP TS 36.458) 3GPP TS 36.458 4 specifies the signalling bearers for the SLmAP for the SLm interface. 7.3 E-UTRAN SLm Interface: SLmAP Specification (3GPP TS 36.459) 3GPP TS 36.459 5 spe
43、cifies the SLmAP for radio network control plane signalling over the SLm interface. ETSI ETSI TS 136 456 V14.0.0 (2017-04)103GPP TS 36.456 version 14.0.0 Release 14Annex A (informative): Change history Change history Date TSG # TSG Doc. CR Rev Subject/Comment New 2012-12 58 RP-121766 Approved in RAN
44、#58 and put under change control 11.0.0 2014-09 Update to Rel-12 version (MCC) 12.0.0 2015-12 Update to Rel-13 version (MCC) 13.0.0 Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2017-03 SA#75 Promotion to Release 14 without technical change 14.0.0 ETSI ETSI TS 136 456 V14.0.0 (2017-04)113GPP TS 36.456 version 14.0.0 Release 14History Document history V14.0.0 April 2017 Publication
