1、 ETSI TS 137 105 V13.3.0 (2017-01) Universal Mobile Telecommunications System (UMTS); LTE; Active Antenna System (AAS) Base Station (BS) transmission and reception (3GPP TS 37.105 version 13.3.0 Release 13) TECHNICAL SPECIFICATION ETSI ETSI TS 137 105 V13.3.0 (2017-01)13GPP TS 37.105 version 13.3.0
2、Release 13Reference RTS/TSGR-0437105vd30 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor
3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written
4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh
5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the f
6、ollowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the P
7、DF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI
8、 registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 137 105 V13.3.0 (2017-01)23GPP TS 37.10
9、5 version 13.3.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000
10、314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investiga
11、tion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificat
12、ion (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
13、The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as
14、 described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 137 105 V13.3.0 (2017-01)33GPP TS 37.105 version 13.3.0 Release 13Contents Intellectual Pr
15、operty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 8g31 Scope 9g32 References 9g33 Definitions, symbols and abbreviations . 10g33.1 Definitions 10g33.2 Symbols 13g33.3 Abbreviations . 14g34 General . 15g34.1 Relationship between the AAS BS specification and non-AAS BS single RAT 2
16、presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporate
17、d in the document. ETSI ETSI TS 137 105 V13.3.0 (2017-01)93GPP TS 37.105 version 13.3.0 Release 131 Scope The present document establishes the RF characteristics, the RF minimum requirements and minimum performance requirements for E-UTRA AAS Base Station (BS), the FDD mode of UTRA AAS Base Station
18、(BS), the 1,28 Mcps TDD mode of UTRA AAS Base Station (BS) in single RAT and any MSR AAS Base Station (BS) implementation of these RATs. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are eith
19、er specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document),
20、a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.104: “Base Station (BS) radio transmission and reception (FDD)“. 3 3GPP TS 25.105: “Base Station (BS) ra
21、dio transmission and reception (TDD)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 5 3GPP TS 37.104: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. 6 3GPP TS 2
22、5.104 (V12.6.0): “Base Station (BS) radio transmission and reception (FDD) (Release 12)“. 7 3GPP TS 25.105 (V12.1.0): “Base Station (BS) radio transmission and reception (TDD) (Release 12)“. 8 3GPP TS 36.104 (V12.9.0): “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio tra
23、nsmission and reception (Release 12)“. 9 3GPP TS 37.104 (V12.8.0): “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception (Release 12)“. 10 3GPP TS 25.142 (V12.1.0): “Base Station (BS) conformance testing (TDD) (Release 12)“. 11 Recommendation ITU-R
24、M.1545: “Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000“. 12 3GPP TS 25.942: “Radio Frequency (RF) system scenarios“. 13 3GPP TS 37.145 (all parts): “Active Antenna System (AAS) Base Station (BS) conformance testing“
25、. 14 Recommendation ITU-R SM.329-10: “Unwanted emissions in the spurious domain“. 15 “Title 47 of the Code of Federal Regulations (CFR)“, Federal Communications Commission. 16 3GPP TS 25.331 (V12.7.0): “Radio Resource Control (RRC); Protocol specification (Release 12)“. 17 Recommendation ITU-R SM.32
26、8-11: “Spectra and bandwidth of emissions“. ETSI ETSI TS 137 105 V13.3.0 (2017-01)103GPP TS 37.105 version 13.3.0 Release 1318 FCC publication number 662911: “Emissions Testing of Transmitters with Multiple Outputs in the Same Band“. 19 3GPP TS 37.141: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radi
27、o (MSR) Base Station (BS) conformance testing“. 20 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA);Base Station (BS) conformance testing“. 21 IEC 60721-3-3: “Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their sev
28、erities - Stationary use at weather protected locations“. 22 IEC 60721-3-4: “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weather protected locations“. 23 ETSI EN 300 019-1-3: “Enviro
29、nmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental conditions; Stationary use at weather protected locations“. 24 ETSI EN 300 019-1-4: “Environmental Engineering (EE); Environmental conditions and env
30、ironmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weather protected locations“. 25 CEPT ECC Decision (13)03, The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downl
31、ink (MFCN SDL). 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GP
32、P TR 21.905 1. NOTE: Multi-word definitions are treated as linguistic expressions and printed in italic font throughout this requirement specification. Linguistic expressions may not be split and are to be printed in their entirety. AAS BS receiver: composite receiver function of an AAS BS receiving
33、 in an uplink operating band active antenna system base station: base station system which combines an antenna array with a transceiver unit array and a radio distribution network active transmitter unit: transmitter unit which is ON, and has the ability to send modulated data streams that are paral
34、lel and distinct to those sent from other transmitter units to one or more TAB connectors at the transceiver array boundary band category: group of operating bands for which the same MSR scenarios apply Base Station RF Bandwidth: bandwidth in which a base station transmits and/or receives single or
35、multiple carrier(s) and/or RATs simultaneously within a supported operating band NOTE: In single carrier operation, the Base Station RF Bandwidth is equal to the channel bandwidth. Base Station RF Bandwidth edge: frequency of one of the edges of the Base Station RF Bandwidth basic limit: emissions l
36、imit taken from the non-AAS BS specifications that is converted into a per TAB connector TX min cell group AAS BS emissions limit, or into a per TAB connector RX min cell group AAS BS emissions limit by scaling, depending on the context beam: main lobe of a radiation pattern from an AAS BS NOTE: For
37、 certain AAS BS antenna array, there may be more than one beam. ETSI ETSI TS 137 105 V13.3.0 (2017-01)113GPP TS 37.105 version 13.3.0 Release 13beam centre direction: direction equal to the geometric centre of the half-power EIRP contour of the beam beam direction pair: data set consisting of the be
38、am centre direction and the related beam peak direction beam peak direction: direction where the maximum EIRP is supposed to be found beamwidth: angles describing the major and minor axes of an ellipsoid closest fit to an essentially elliptic half-power EIRP contour of the beam carrier: modulated wa
39、veform conveying the E-UTRA or UTRA physical channels carrier aggregation: aggregation of two or more E-UTRA component carriers in order to support wider transmission bandwidths channel bandwidth: RF bandwidth supporting a single RF carrier with the transmission bandwidth configured in the uplink or
40、 downlink of a cell NOTE 1: The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. NOTE 2: For UTRA FDD, the channel bandwidth is the nominal channel spacing specified in 3GPP TS 25.104 2, For UTRA TDD 1,28 Mcps, the channel bandwidth is the
41、 nominal channel spacing specified in 3GPP TS 25.105 3. NOTE 3: For E-UTRA, the channel bandwidths are specified in 3GPP TS 36.104 4. code domain power: part of the mean power which correlates with a particular (OVSF) code channel in a UTRA signal NOTE: The sum of all powers in the code domain equal
42、s the mean power in a bandwidth of (1+) times the chip rate of the radio access mode. demodulation branch: single input of the AAS BS receiver to the demodulation algorithms. NOTE 1: For UTRA non-AAS BS a demodulation branch is referred to as a receive diversity branch or an UL MIMO branch. For E-UT
43、RA non-AAS BS a demodulation branch is referred to as an RX antenna in the performance requirement tables. NOTE 2: The term “RX antenna“ in chapter 8 (i.e. Performance requirements) of the E-UTRA specification 3GPP TS 36.104 4 does not refer to physical receiver antennas. downlink operating band: pa
44、rt of the (FDD) operating band designated for downlink transmission EIRP accuracy directions set: beam peak directions for which the EIRP accuracy requirement is intended to be met. NOTE: The beam peak directions are related to a corresponding contiguous range or discrete list of beam centre directi
45、ons by the beam direction pairs included in the set. equivalent isotropic radiated power: equivalent power radiated from an isotropic directivity device producing the same field intensity at a point of observation as the field intensity radiated in the direction of the same point of observation by t
46、he discussed device NOTE: Isotropic directivity is equal in all directions (i.e. 0 dBi). equivalent isotropic sensitivity: sensitivity for an isotropic directivity device equivalent to the sensitivity of the discussed device exposed to an incoming wave from a defined AoA NOTE 1: The sensitivity is t
47、he minimum received power level at which a RAT specific requirement is met. NOTE 2: Isotropic directivity is equal in all directions (i.e. 0 dBi). Inter RF Bandwidth gap: frequency gap between two consecutive Base Station RF Bandwidths that are placed within two supported operating bands maximum car
48、rier output power per TAB connector: mean power level measured on a particular carrier at the TAB connector(s), during the transmitter ON period in a specified reference condition maximum throughput: maximum achievable throughput for a reference measurement channel ETSI ETSI TS 137 105 V13.3.0 (2017
49、-01)123GPP TS 37.105 version 13.3.0 Release 13MSR operation: operation of AAS BS declared to be MSR in particular operating band(s) multi-band requirements: requirements applying per one single operating band with exclusion bands or other multi-band provisions as defined for each requirement multi-band TAB connector: TAB connector supporting operation in multiple operating bands through common active electronic component(s) NOTE: For common TX and RX TAB connectors, the definition applies where common active ele
