1、 ETSI TS 1Digital cellular telecommUniversal Mobile TelE-UTRA,Multi-Standard RElectromag(3GPP TS 37.1TECHNICAL SPECIFICATION137 113 V13.1.0 (2016mmunications system (Phase elecommunications System (LTE; A UTRA and GSM/EDGE; d Radio (MSR) Base Station (Bagnetic Compatibility (EMC) .113 version 13.1.0
2、 Release 1316-04) e 2+) (GSM); (UMTS); (BS) 13) ETSI ETSI TS 137 113 V13.1.0 (2016-04)13GPP TS 37.113 version 13.1.0 Release 13Reference RTS/TSGR-0437113vd10 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret
3、 N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The
4、 content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable
5、 Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.ets
6、i.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical
7、, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Stan
8、dards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo ar
9、e Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 137 113 V13.1.0 (2016-04)23GPP TS 37.113 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these e
10、ssential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest upd
11、ates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web ser
12、ver) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identit
13、ies or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall n
14、ot“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct ci
15、tation. ETSI ETSI TS 137 113 V13.1.0 (2016-04)33GPP TS 37.113 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 10g33.3 Abbre
16、viations . 10g34 Test conditions . 11g34.1 General . 11g34.2 Arrangements for establishing a communication link 11g34.2.1 Multiple enclosure BS solution . 12g34.3 Narrow band responses on receivers 12g34.4 Exclusion bands 12g34.4.1 Transmitter exclusion band . 12g34.4.2 Receiver exclusion band . 12g
17、34.5 BS test configurations 14g35 Performance assessment . 15g35.1 General . 15g35.2 Assessment of performance in Downlink . 16g35.3 Assessment of performance in Uplink 16g35.4 Ancillary equipment . 16g36 Performance criteria . 16g36.1 Performance criteria for continuous phenomena for BS 17g36.1.1 E
18、-UTRA performance criteria 17g36.1.2 UTRA performance criteria 17g36.1.3 GSM/EDGE performance criteria . 18g36.1.3.1 GSM/EDGE downlink 18g36.1.3.1 GSM/EDGE uplnik . 18g36.2 Performance criteria for transient phenomena for BS 18g36.3 Performance criteria for continuous phenomena for Ancillary equipme
19、nt . 19g36.4 Performance criteria for transient phenomena for Ancillary equipment 19g37 Applicability overview . 19g37.1 Emission . 19g37.2 Immunity 20g38 Emission . 20g38.1 Test configurations . 20g38.2 Radiated emission from Base Station and ancillary equipment 21g38.2.1 Radiated emission for Base
20、 Stations . 21g38.2.1.1 Definition 21g38.2.1.2 Test method . 21g38.2.1.3 Limits 21g38.2.1.4 Interpretation of the measurement results . 22g38.2.2 Radiated emission, ancillary equipment . 23g38.2.2.1 Definition 23g38.2.2.2 Test method . 23g38.2.2.3 Limits 23g38.3 Conducted emission DC power input/out
21、put port 23g3ETSI ETSI TS 137 113 V13.1.0 (2016-04)43GPP TS 37.113 version 13.1.0 Release 138.3.1 Definition 23g38.3.2 Test method 24g38.3.3 Limits 24g38.4 Conducted emissions, AC mains power input/output port . 24g38.4.1 Definition 24g38.4.2 Test method 24g38.4.3 Limits 24g38.5 Harmonic current emi
22、ssions (AC mains input port) . 25g38.6 Voltage fluctuations and flicker (AC mains input port) . 25g38.7 Telecommunication ports . 25g38.7.1 Definition 25g38.7.2 Test method 25g38.7.3 Limits 26g39 Immunity 26g39.1 Test configurations . 26g39.2 RF electromagnetic field (80 MHz - 1000 MHz, 1400 MHz to
23、2700 MHz) 27g39.2.1 Definition 27g39.2.2 Test method and level . 27g39.2.3 Performance criteria 28g39.3 Electrostatic discharge 28g39.3.1 Definition 28g39.3.2 Test method and level . 28g39.3.3 Performance criteria 28g39.4 Fast transients common mode 28g39.4.1 Definition 29g39.4.2 Test method and lev
24、el . 29g39.4.3 Performance criteria 29g39.5 RF common mode (0,15 MHz - 80 MHz) 29g39.5.1 Definition 29g39.5.2 Test method and level . 29g39.5.3 Performance criteria 30g39.6 Voltage dips and interruptions 30g39.6.1 Definition 30g39.6.2 Test method and level . 30g39.6.3 Performance criteria 30g39.7 Su
25、rges, common and differential mode 31g39.7.1 Definition 31g39.7.2 Test method and level . 31g39.7.2.1 Test method for telecommunication ports directly connected to outdoor cables 31g39.7.2.2 Test method for telecommunication ports connected to indoor cables . 31g39.7.2.3 Test method for AC power por
26、ts . 31g39.7.3 Performance criteria 32g3Annex A (normative): BER assessment for GSM/EDGE . 33g3A.1 Assessment of BER at the output of a transmitter 33g3A.1.1 Assessment of BER using static layer 1 functions . 33g3A.1.2 Assessment of BER using RXQUAL . 33g3A.2 Assessment of BER at the output of a rec
27、eiver 33g3A.2.1 Assessment of BER using RXQUAL . 33g3A.2.2 Assessment of BER using reported BER . 33g3Annex B (informative): Change history . 34g3History 35g3ETSI ETSI TS 137 113 V13.1.0 (2016-04)53GPP TS 37.113 version 13.1.0 Release 13Foreword This Technical Specification has been produced by the
28、3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of relea
29、se date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. t
30、echnical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 137 113 V13.1.0 (2016-04)63GPP TS 37.113 version 13.1.0 Release 131 Scope The present document covers the assessment of E-UTRA, UTRA and
31、 GSM/EDGE Multi-Standard Radio (MSR) Base Stations and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditions, performance assessment and performance criteria for E-UTRA, UTRA and GSM/EDGE Base Stations and asso
32、ciated ancillary equipment in one of the following categories: - Multi-Standard Radio (MSR) Base Stations for E-UTRA, UTRA and GSM/EDGE meeting the requirements of TS 37.104 6, with conformance demonstrated by compliance to TS 37.141 11. - Base Stations for E-UTRA meeting the requirements of TS 36.1
33、04 4, with conformance demonstrated by compliance to TS 36.141 9. - Base Stations for UTRA FDD meeting the requirements of TS 25.104 2, with conformance demonstrated by compliance to TS 25.141 7. - Base Stations for UTRA TDD meeting the requirements of TS 25.105 3, with conformance demonstrated by c
34、ompliance to TS 25.142 8. - Base Stations for GSM/EDGE meeting the requirements of TS 45.005 5, with conformance demonstrated by compliance to TS 51.021 10. In addition to MSR base stations, the present document covers other BS supporting more than one RAT. Technical requirements related to the ante
35、nna port of Base Stations are not included in the present document. These are found in the relevant product standards 2-11. The environment classification used in the present document refers to the environment classification used in IEC 61000-6-1 12 and IEC 61000-6-3 13. The EMC requirements have be
36、en selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain pr
37、ovisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specif
38、ic reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2
39、 3GPP TS 25.104: “Base Station (BS) radio transmission and reception (FDD)“. 3 3GPP TS 25.105: “Base Station (BS) radio transmission and reception (TDD)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception “. 5 3GPP TS 45.005: “
40、Radio transmission and reception“. 6 3GPP TS 37.104: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. ETSI ETSI TS 137 113 V13.1.0 (2016-04)73GPP TS 37.113 version 13.1.0 Release 137 3GPP TS 25.141: “Base Station (BS) conformance testing (FD
41、D)“. 8 3GPP TS 25.142: “Base Station (BS) conformance testing (TDD)“. 9 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing“. 10 3GPP TS 51.021: “Base Station System (BSS) equipment specification; Radio aspects“. 11 3GPP TS 37.141: “E-UTRA, UTR
42、A and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing“ 12 IEC 61000-6-1: 2005: “Electromagnetic compatibility (EMC) - Part 6: Generic standards Section 1: Immunity for residential, commercial and light-industrial environments“. 13 IEC 61000-6-3: 1996: “Electromagnetic comp
43、atibility (EMC) - Part 6: Generic standards Section 3: Emission standard for residential, commercial and light industrial environments“. 14 IEC 60050-161: “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility“. 15 ITU-R Recommendation SM.329: “Unwanted emissions in
44、the spurious domain“. 16 ITU-R Recommendation SM.1539 (2001): “Variation of the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 17 CISPR 22: “Limits and methods of measurement of radio disturbance characteristics
45、of information technology equipment“. 18 CISPR 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Measuring apparatus“. 19 IEC 61000-3-2 (2004): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipmen
46、t input current 16 A)“. 20 IEC 61000-3-12 (2005): “Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage system with input current 16 A and 75 A“. 21 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Part
47、 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“. 22 IEC 61000-3-11 (2000): “Electromagnetic compatibility (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems
48、 for equipment with rated current 75 A and subject to conditional connections“. 23 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test“. 24 IEC 61000-4-2: “Electromagnetic compatib
49、ility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 25 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test“. 26 IEC 61000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to contacted disturbances, induced by radio frequency fields“. 27 IEC 61000-4-11: “Electromagnet
