1、 ETSI TS 13Digital cellular telecoUniversal Mobile TelE-UTRA,Multi-Standard Rcon(3GPP TS 37.14TECHNICAL SPECIFICATION137 141 V11.13.0 (201communications system (Phaelecommunications System (LTE; A UTRA and GSM/EDGE; d Radio (MSR) Base Station (Bonformance testing .141 version 11.13.0 Release 1016-01
2、) hase 2+); (UMTS); (BS) 11) ETSI ETSI TS 137 141 V11.13.0 (2016-01)13GPP TS 37.141 version 11.13.0 Release 11Reference RTS/TSGR-0437141vbd0 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00
3、017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any e
4、lectronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format
5、(PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/s
6、tatus.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photo
7、copying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2
8、016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks reg
9、istered and owned by the GSM Association. ETSI ETSI TS 137 141 V11.13.0 (2016-01)23GPP TS 37.141 version 11.13.0 Release 11Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs,
10、if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availa
11、ble on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are,
12、 or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM iden
13、tities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“,
14、“should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ET
15、SI TS 137 141 V11.13.0 (2016-01)33GPP TS 37.141 version 11.13.0 Release 11Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 10g31 Scope 11g32 References 11g33 Definitions, symbols and abbreviations . 12g33.1 Definitions 12g33.2 Symbols 15g33.3 Abbreviations
16、 . 17g34 General test conditions and declarations 18g34.1 Measurement uncertainties and test requirements 18g34.1.1 General 18g34.1.2 Acceptable uncertainty of Test System . 18g34.1.2.1 Measurement of transmitter 19g34.1.2.2 Measurement of receiver . 20g34.1.3 Interpretation of measurement results .
17、 21g34.2 Base Station classes 22g34.3 Regional requirements 22g34.4 Operating bands and band categories . 23g34.4.1 Band category 1 aspects (BC1) . 25g34.4.2 Band category 2 aspects (BC2) . 25g34.4.3 Band category 3 aspects (BC3) . 25g34.5 Channel arrangement 26g34.5.1 Channel spacing 26g34.5.1A CA
18、Channel spacing . 26g34.5.2 Channel raster . 26g34.5.3 Carrier frequencies and numbering . 26g34.6 Manufacturers declarations of regional and optional requirements . 27g34.6.1 Operating band and frequency range 27g34.6.2 Spurious emissions category . 27g34.6.3 Additional operating band unwanted emis
19、sions . 27g34.6.4 Co-existence with other systems . 27g34.6.5 Co-location with other Base Stations 28g34.7 Capability set definition and manufacturers declarations of supported RF configurations . 28g34.7.1 Definition of Capability Sets (CS) 28g34.7.2 Manufacturers declarations of supported RF confi
20、gurations . 29g34.8 MSR test configurations . 31g34.8.1 TC1: UTRA multicarrier operation 31g34.8.1.1 TC1a generation 31g34.8.1.2 TC1b generation 31g34.8.1.3 TC1 power allocation 32g34.8.1a NTC1: UTRA multicarrier non-contiguous operation 32g34.8.1a.1 NTC1a generation . 32g34.8.1a.2 NTC1 power alloca
21、tion . 32g34.8.2 TC2: E-UTRA multicarrier operation . 32g34.8.2.1 TC2 generation 32g34.8.2.2 TC2 power allocation 33g34.8.2a NTC2: E-UTRA multicarrier non-contiguous operation 33g34.8.2a.1 NTC2 generation . 33g34.8.2a.2 NTC2 power allocation . 33g34.8.3 TC3: UTRA and E-UTRA multi RAT operation 33g34
22、.8.3.1 TC3a generation 33g3ETSI ETSI TS 137 141 V11.13.0 (2016-01)43GPP TS 37.141 version 11.13.0 Release 114.8.3.2 TC3b generation 34g34.8.3.3 TC3 power allocation 34g34.8.3a NTC3: UTRA and E-UTRA multi RAT non-contiguous operation . 34g34.8.3a.1 NTC3a generation . 34g34.8.3a.2 NTC3 power allocatio
23、n . 35g34.8.4 TC4: BC2 transmitter operation 35g34.8.4.1 TC4a generation 35g34.8.4.2 TC4b generation 35g34.8.4.3 TC4c generation 36g34.8.4.4 TC4d generation 36g34.8.4.5 TC4e generation 37g34.8.4.6 TC4 power allocation 37g34.8.4a NTC4: Non-contiguous multi RAT operations with GSM for the transmitter
24、. 37g34.8.4a.1 NTC4a generation . 37g34.8.4a.2 NTC4b generation . 38g34.8.4a.3 NTC4c generation . 39g34.8.4a.4 NTC4 power allocation . 39g34.8.5 TC5: BC2 receiver operation 40g34.8.5.1 TC5a generation 40g34.8.5.2 TC5b generation 40g34.8.5a NTC5: Non-contiguous multi RAT operations with GSM for the r
25、eceiver 40g34.8.5a.1 NTC5a generation . 40g34.8.5a.2 NTC5b generation . 40g34.8.5a.3 NTC5c generation . 40g34.8.6 TC6: Single carrier for receiver tests 41g34.8.6.1 TC6a generation 41g34.8.6.2 TC6b generation 41g34.8.6.3 TC6c generation 41g34.8.7 Generation of MB-MSR test configurations . 41g34.8.7.
26、1 TC7a: MB-MSR test configuration for full carrier allocation . 41g34.8.7.1.1 TC7a generation 41g34.8.7.1.2 TC7a power allocation 42g34.8.7.2 TC7b: MB-MSR test configuration with high PSD per carrier . 42g34.8.7.2.1 TC7b generation 42g34.8.7.2.2 TC7b power allocation 43g34.8.7.3 TC7c: MB-MSR test co
27、nfiguration with GSM/EDGE single RAT operation in one band . 43g34.8.7.3.1 TC7c generation 43g34.8.7.3.2 TC7c power allocation 44g34.9 RF channels and test models 44g34.9.1 RF channels 44g34.9.2 Test models. 45g34.10 BS configurations . 46g34.10.1 Transmit configurations 46g34.10.1.1 Transmission wi
28、th multiple transmitter antenna connectors . 46g34.10.2 Receive configurations . 46g34.10.2.1 Reception with multiple receiver antenna connectors, receiver diversity . 46g34.10.3 Duplexers 47g34.10.4 Power supply options 47g34.10.5 Ancillary RF amplifiers 47g34.10.6 BS with integrated Iuant BS modem
29、 48g34.10.7 BS using antenna arrays 48g34.10.7.1 Receiver tests 48g34.10.7.2 Transmitter tests 49g34.11 Format and interpretation of tests . 49g34.12 Requirements for BS capable of multi-band operation 50g35 Applicability of requirements and test configurations . 50g35.1 Multi-RAT capable Base Stati
30、ons 52g35.2 Single-RAT Multi-carrier capable Base Stations . 56g35.3 Multi-band capable Base Stations 60g36 Transmitter characteristics . 62g3ETSI ETSI TS 137 141 V11.13.0 (2016-01)53GPP TS 37.141 version 11.13.0 Release 116.1 General . 62g36.2 Base Station output power 62g36.2.1 Base Station maximu
31、m output power . 62g36.2.1.1 Definition and applicability . 62g36.2.1.2 Minimum requirement 62g36.2.1.3 Test purpose 62g36.2.1.4 Method of test . 62g36.2.1.4.1 Initial conditions 62g36.2.1.4.2 Procedure . 63g36.2.1.5 Test requirements 63g36.2.2 E-UTRA DL RS power . 63g36.2.2.1 Definition and applica
32、bility . 63g36.2.2.2 Minimum requirement 63g36.2.2.3 Test purpose 63g36.2.2.4 Method of test . 64g36.2.2.5 Test requirements 64g36.2.3 UTRA FDD primary CPICH power . 64g36.2.3.1 Definition and applicability . 64g36.2.3.2 Minimum requirement 64g36.2.3.3 Test purpose 64g36.2.3.4 Method of test . 64g36
33、.2.3.5 Test requirements 64g36.2.3A UTRA FDD secondary CPICH power 64g36.2.3A.1 Definition and applicability . 64g36.2.3A.2 Minimum requirement 65g36.2.3A.3 Test purpose 65g36.2.3A.4 Method of test . 65g36.2.3A.5 Test requirements 65g36.2.4 UTRA TDD primary CCPCH power 65g36.2.4.1 Definition and app
34、licability . 65g36.2.4.2 Minimum requirement 65g36.2.4.3 Test purpose 65g36.2.4.4 Method of test . 65g36.2.4.5 Test requirements 66g36.3 Output power dynamics 66g36.3.1 Definition and applicability 66g36.3.2 Minimum Requirement . 66g36.3.3 Test purpose 66g36.3.4 Method of test . 66g36.3.5 Test Requi
35、rement 66g36.4 Transmit ON/OFF power . 66g36.4.1 Definition and applicability 66g36.4.2 Minimum Requirement . 67g36.4.3 Test purpose 67g36.4.4 Method of test . 67g36.4.4.1 Initial conditions . 67g36.4.4.2 Procedure 67g36.4.5 Test requirement . 68g36.5 Transmitted signal quality 68g36.5.1 Modulation
36、quality 68g36.5.1.1 Definition and applicability . 68g36.5.1.2 Minimum Requirement . 68g36.5.1.3 Test purpose 68g36.5.1.4 Method of test . 68g36.5.1.4.1 Initial conditions 68g36.5.1.4.2 Procedure . 68g36.5.1.5 Test Requirements . 69g36.5.1.5.1 E-UTRA test requirement 69g36.5.1.5.2 UTRA FDD test requ
37、irement 69g36.5.1.5.3 UTRA TDD test requirement 69g36.5.1.5.4 GSM/EDGE test requirement 69g36.5.2 Frequency error . 69g3ETSI ETSI TS 137 141 V11.13.0 (2016-01)63GPP TS 37.141 version 11.13.0 Release 116.5.2.1 Definition and applicability . 69g36.5.2.2 Minimum Requirement . 69g36.5.2.3 Test purpose 6
38、9g36.5.2.4 Method of test . 69g36.5.2.5 Test Requirements . 70g36.5.2.5.1 E-UTRA test requirement 70g36.5.2.5.2 UTRA FDD test requirement 70g36.5.2.5.3 UTRA TDD test requirement 70g36.5.2.5.4 GSM/EDGE test requirement 70g36.5.3 Time alignment error 70g36.5.3.1 Definition and applicability . 70g36.5.
39、3.2 Minimum requirement 70g36.5.3.3 Test purpose 70g36.5.3.4 Method of test . 70g36.5.3.5 Test requirement . 71g36.6 Unwanted emissions . 71g36.6.1 Transmitter spurious emissions . 71g36.6.1.1 Definition and applicability . 71g36.6.1.2 Minimum requirement 71g36.6.1.3 Test purpose 71g36.6.1.4 Method
40、of test . 71g36.6.1.4.1 Initial conditions 71g36.6.1.4.2 Procedure . 72g36.6.1.5 Test requirements 72g36.6.1.5.1 Spurious emissions (Category A) 72g36.6.1.5.2 Spurious emissions (Category B) 73g36.6.1.5.3 Additional test requirement for BC2 (category B) 73g36.6.1.5.4 Protection of the BS receiver of
41、 own or different BS 73g36.6.1.5.5 Additional spurious emission requirements . 74g36.6.1.5.6 Co-location with other Base Stations 79g36.6.2 Operating band unwanted emissions 82g36.6.2.1 Definition and applicability . 82g36.6.2.2 Minimum requirement 82g36.6.2.3 Test purpose 83g36.6.2.4 Method of test
42、 . 83g36.6.2.4.1 Initial conditions 83g36.6.2.4.2 Procedure . 83g36.6.2.5 Test requirement . 84g36.6.2.5.1 Test requirements for Band Categories 1 and 3 . 84g36.6.2.5.2 Test requirements for Band Category 2 . 90g36.6.2.5.3 Test requirements for GSM/EDGE single-RAT requirements 96g36.6.2.5.4 Test req
43、uirements for additional requirements 96g36.6.2.5.4.1 Limits in FCC Title 47 . 96g36.6.2.5.4.2 Unsynchronized operation for BC3 . 96g36.6.2.5.4.3 Protection of DTT 96g36.6.2.5.4.4 Co-existence with services in adjacent frequency bands . 96g36.6.2.5.4.5 Additional requirements for band 41 . 97g36.6.3
44、 Occupied bandwidth . 97g36.6.3.1 Definition and applicability . 97g36.6.3.2 Minimum requirements . 97g36.6.3.3 Test purpose 97g36.6.3.4 Method of test . 97g36.6.3.5 Test requirement . 98g36.6.4 Adjacent Channel Leakage power Ratio (ACLR) 98g36.6.4.1 Definition and applicability . 98g36.6.4.2 Minimu
45、m requirement 98g36.6.4.3 Test purpose 98g36.6.4.4 Method of test . 98g36.6.4.4.1 Initial conditions 98g36.6.4.4.2 Procedure . 99g36.6.4.5 Test requirements 99g36.6.4.5.1 E-UTRA test requirement 99g3ETSI ETSI TS 137 141 V11.13.0 (2016-01)73GPP TS 37.141 version 11.13.0 Release 116.6.4.5.2 UTRA FDD t
46、est requirement 99g36.6.4.5.3 UTRA TDD test requirement 100g36.6.4.5.4 Cumulative ACLR requirement in non-contiguous spectrum . 100g36.7 Transmitter intermodulation . 101g36.7.1 Definition and applicability 101g36.7.2 Minimum requirement 101g36.7.2A Additional requirement for Band 41 . 101g36.7.3 Te
47、st purpose 101g36.7.4 Method of test . 102g36.7.4.1 Initial conditions . 102g36.7.4.2 Procedure 102g36.7.4.2.1 General minimum requirement test procedure 102g36.7.4.2.2 Additional minimum requirement (BC1 and BC2) test procedure 103g36.7.4.2.3 Additional minimum requirement (BC3) test procedure . 10
48、3g36.7.5 Test requirements 104g36.7.5.1 General test requirement . 104g36.7.5.2 Additional test requirement (BC1 and BC2) . 104g36.7.5.3 Additional test requirement (BC3) 105g36.7.5.4 Additional test requirement for Band 41 . 105g37 Receiver characteristics 105g37.1 General . 105g37.2 Reference sens
49、itivity level 105g37.2.1 Definition and applicability 105g37.2.2 Minimum requirement 105g37.2.3 Test purpose 105g37.2.4 Method of test . 106g37.2.5 Test requirements 106g37.3 Dynamic range . 106g37.3.1 Definition and applicability 106g37.3.2 Minimum requirement 106g37.3.3 Test purpose 106g37.3.4 Method of test . 106g37.3.5 Test requirements 107g37.4 In-band selectivity and blocking 107g37.4.1 Definition and applicability 107g37.4.2 Minimum requirement 107g37.4.3 Test purpose 107g37.4.4 Method of test . 107g37.4.4.1 Initial conditions . 107g37.4.4.2 Procedure for general bl
