1、 ETSI TS 1Digital cellular telecommRadio s(3GPP TS 45.0TECHNICAL SPECIFICATION145 008 V13.1.0 (2016mmunications system (Phase subsystem link control .008 version 13.1.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-04) e 2+) (GSM); 13) TEM FOR ICATIONSRETSI ETSI TS 145 008 V13.1.0 (2016-04)13GPP TS 45.008 v
2、ersion 13.1.0 Release 13Reference RTS/TSGG-0145008vd10 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803
3、/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior
4、 written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present do
5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fo
6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD
7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI
8、registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 145 008 V13.1.0 (2016-04)23GPP TS 45.008
9、 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3
10、14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigat
11、ion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificati
12、on (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. T
13、he cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as
14、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 145 008 V13.1.0 (2016-04)33GPP TS 45.008 version 13.1.0 Release 13Contents Intellectual Pro
15、perty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 8g31 Scope 9g31.1 References 9g31.2 Abbreviations . 11g31.3 Definitions 11g31.4 Restrictions . 11g32 General . 11g33 Handover 13g33.1 Overall process . 13g33.2 MS measurement procedure . 13g33.3 BSS measurement procedure 13g33.4 Str
16、ategy 13g34 RF power control 14g34.1 Overall process . 14g34.2 MS implementation 14g34.2.1 General 14g34.2.2 (EC-)RACH 15g34.2.2.1 Random access procedure when not in EC-EGPRS operation 15g34.2.2.2 Random access procedure in EC-EGPRS operation . 16g34.3 MS power control range . 16g34.4 BSS implement
17、ation . 17g34.4.1 VAMOS subchannel power control for BSS in downlink 17g34.5 BSS power control range 17g34.6 Strategy 17g34.7 Timing 17g34.7.1 Normal Power Control 17g34.7.2 Fast Power Control . 18g34.7.3 Enhanced Power Control 18g34.8 Dedicated channels used for a voice group call or voice broadcas
18、t 18g35 Radio link failure 19g35.1 Criterion . 19g35.2 MS procedure . 19g35.3 BSS procedure 20g36 Idle mode tasks . 20g36.1 Introduction 20g36.2 Measurements for normal cell selection . 21g36.3 Measurements for stored list cell selection . 22g36.4 Criteria for cell selection and reselection . 22g36.
19、5 Downlink signalling failure 24g36.6 Measurements for Cell Reselection 24g36.6.0 General 24g36.6.1 Monitoring of received signal level and BCCH data 25g36.6.1a Reduced Monitoring of received signal level and (EC-)BCCH data 26g36.6.2 Path loss criteria and timings for cell re-selection 27g36.6.3 Cel
20、l reselection algorithm for SoLSA . 28g36.6.4 Measurements on cells of other radio access technologies . 28g36.6.5 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking 33g36.6.6 Algorithm for inter-RAT cell re-selection based on priority information . 34g3ETSI ETSI TS 145 008 V13.
21、1.0 (2016-04)43GPP TS 45.008 version 13.1.0 Release 136.6.7 Cell selection and re-selection to CSG cells and hybrid cells . 37g36.6.7.1 Cell re-selection to CSG cells . 37g36.6.7.1a Cell re-selection to hybrid cells . 38g36.6.7.2 Manual CSG ID selection . 38g36.7 Release of TCH, SDCCH and DBPSCH 38g
22、36.7.1 Normal case 38g36.7.2 Call re-establishment 39g36.8 Abnormal cases and emergency calls . 39g36.9 Received signal level measurements for EC-EGPRS . 40g36.9.1 General 40g36.9.2 Physical parameter 40g36.9.3 Statistical parameter 40g36.9.4 Accuracy requirements . 40g36.9.5 Range of parameter . 41
23、g36.10 Coverage class selection for EC-EGPRS . 41g36.10.1 General 41g36.10.2 Downlink coverage class selection . 41g36.10.3 Uplink coverage class selection 42g36.10.4 Coverage class adaptation for EC-CCCH . 42g36.10.5 Downlink coverage class update . 42g37 Network pre-requisites . 43g37.1 BCCH carri
24、ers 43g37.2 Identification of surrounding BSS for handover measurements . 44g37.3 Handover measurements on other radio access technologies . 46g37.4 Handover measurements on UTRAN CSG cells and hybrid cells . 49g38 Radio link measurements . 50g38.1 Signal level . 50g38.1.1 General 50g38.1.2 Physical
25、 parameter 50g38.1.3 Statistical parameters 51g38.1.4 Range of parameter . 51g38.1.5 Measurement quantity for other radio access technologies 52g38.1.5.1 UTRAN FDD 52g38.1.5.2 UTRAN TDD 52g38.1.5.3 cdma2000 52g38.1.5.4 E-UTRAN FDD 53g38.1.5.5 E-UTRAN TDD 54g38.2 Signal quality 54g38.2.1 General 54g3
26、8.2.2 Physical parameter 54g38.2.3 Statistical parameters 55g38.2.3.1 RXQUAL 55g38.2.3.2 MEAN_ BEP and CV_BEP 55g38.2.4 Range of parameter RXQUAL . 56g38.2.5 Range of parameters MEAN_BEP and CV_BEP . 57g38.3 Aspects of discontinuous transmission (DTX) . 61g38.4 Measurement reporting . 62g38.4.1 Meas
27、urement reporting for the MS . 62g38.4.1a Measurement reporting for the MS in FPC mode . 64g38.4.1b Measurement reporting for the MS in EPC mode . 64g38.4.2 Measurement reporting for the MS on a SDCCH . 65g38.4.3 Additional cell reporting requirements for multi band MS . 65g38.4.4 Common aspects for
28、 the MS on a TCH, a SDCCH or a DBPSCH . 66g38.4.5 Measurement reporting for the BSS . 66g38.4.6 Extended measurement reporting . 67g38.4.7 Additional cell reporting requirements for multi-RAT MS 67g38.4.8 Enhanced Measurement Reporting . 69g38.4.8.1 Reporting Priority . 69g38.4.8.2 Measurement Repor
29、ting 70g38.4.8.3 NBR_RCVD_BLOCKS for FLO 71g3ETSI ETSI TS 145 008 V13.1.0 (2016-04)53GPP TS 45.008 version 13.1.0 Release 138.4.9 Requirements for measurement and reporting of CSG cells and hybrid cells 71g38.5 Absolute MS-BTS distance 72g38.5.1 General 72g38.5.2 Physical parameter 72g39 Control par
30、ameters . 73g310 GPRS mode tasks . 81g310.1 Cell Re-selection 81g310.1.0 General 81g310.1.1 Monitoring the received signal level and PBCCH data 82g310.1.1.0 General 82g310.1.1.1 Packet idle mode or MAC-Idle state . 83g310.1.1.2 Packet transfer mode or MAC-Shared state 83g310.1.1.2a Broadcast/multica
31、st receive mode . 84g310.1.1.3 Monitoring cells of other radio access technologies . 85g310.1.2 Cell Re-selection Criteria 89g310.1.3 Cell Re-selection Algorithm . 90g310.1.3.1 Abnormal cell reselection . 91g310.1.3.2 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking 92g310.1.3
32、.3 Algorithm for inter-RAT cell re-selection based on priority information . 93g310.1.3.4 Cell selection and re-selection to CSG cells and hybrid cells . 93g310.1.4 Network controlled Cell re-selection 93g310.1.4.1 Measurement reporting . 94g310.1.4.2 Cell re-selection command 99g310.1.4.3 Exception
33、al cases 99g310.1a Measurement and Reporting of CSG Cells and hybrid cells 99g310.2 RF Power Control . 100g310.2.1 MS output power 100g310.2.2 BTS output power . 101g310.2.3 Measurements at MS side . 102g310.2.3.1 Deriving the C value . 103g310.2.3.1.1 Packet idle mode or MAC-Idle state . 103g310.2.
34、3.1.2 Packet transfer mode or MAC-Shared state 103g310.2.3.1.2.1 MS that have not enabled EC-EGPRS operation . 103g310.2.3.1.2.2 MS that have enabled EC-EGPRS operation . 105g310.2.3.2 Derivation of Channel Quality Report 105g310.2.3.2.1 Packet transfer mode or MAC-Shared state 105g310.2.3.2.2 Void
35、. 109g310.2.3.2.3 Measurement reporting 109g310.2.3.2.4 Measurement reporting - additional requirements for downlink dual carrier 110g310.2.3.2.5 Measurement reporting - additional requirements for downlink multi carrier. 110g310.2.3.3 Range of parameters MEAN_BEP and CV_BEP for EGPRS2 111g310.2.4 M
36、easurements at BSS side 115g310.2a Packet-switched Handover . 115g310.3 Measurement requirements 115g310.4 Control parameters . 115g311 CTS mode tasks 123g311.1 CTS idle mode tasks . 123g311.1.1 CTS cell selection . 124g311.1.1.1 Synchronization and measurements for CTS cell selection 124g311.1.1.2
37、Initial sychronization of CTS-MS . 124g311.1.2 Criterion for CTS cell selection 124g311.1.3 Monitoring of CTSBCH and CTSPCH . 125g311.1.3.1 Monitoring of received signal level 125g311.1.3.2 Downlink beacon failure . 125g311.1.3.3 Downlink paging failure . 125g311.1.4 Procedures with reporting to the
38、 CTS-FP . 125g311.1.4.1 AFA monitoring 125g311.1.4.2 BCCH detection 126g311.1.4.3 Observed Frequency Offset (OFO) measurement . 126g311.2 Intra-cell handover . 126g3ETSI ETSI TS 145 008 V13.1.0 (2016-04)63GPP TS 45.008 version 13.1.0 Release 1311.2.1 Overall process . 126g311.2.2 CTS-MS measurement
39、procedure . 126g311.2.3 CTS-FP measurement procedure 127g311.2.4 Strategy . 127g311.3 RF power control 127g311.3.1 Overall process . 127g311.3.2 CTS-MS implementation 127g311.3.3 CTS-MS power control range . 127g311.3.4 CTS-FP implementation . 128g311.3.5 CTS-FP power control range 128g311.3.6 Strat
40、egy . 128g311.3.7 Timing 128g311.4 Radio link failure 128g311.4.1 Criterion 128g311.4.2 CTS-MS procedure . 128g311.4.3 CTS-FP procedure 129g311.5 Radio link measurements . 129g311.5.1 Signal strength 129g311.5.1.1 General 129g311.5.1.2 Physical parameter 129g311.5.1.3 Statistical parameters 129g311.
41、5.1.4 Range of parameter . 129g311.5.2 Signal quality 130g311.5.2.1 General 130g311.5.2.2 Physical parameter 130g311.5.2.3 Statistical parameters 130g311.5.2.4 Range of parameter . 130g311.5.3 Aspects of discontinuous transmission (DTX) . 130g311.5.4 Measurement reporting for the CTS-MS on a TCH 130
42、g311.6 Control of CTS-FP service range . 131g311.7 Control parameters . 131g312 COMPACT Mode Tasks 133g312.1 Introduction 133g312.2 Network Pre-requisites . 133g312.2.1 CPBCCH carriers 133g312.3 COMPACT Idle Mode Tasks . 133g312.3.1 Introduction. 133g312.3.2 Measurements for COMPACT Cell Selection 1
43、33g312.3.3 Measurements for COMPACT Stored List Cell Selection . 134g312.3.4 Criteria for COMPACT Cell Selection . 134g312.3.5 Downlink Signalling Failure . 134g312.4 COMPACT Cell Reselection . 134g312.4.1 Monitoring the received signal level and CPBCCH data 135g312.4.1.1 Packet idle mode or MAC-Idl
44、e state . 135g312.4.1.2 Packet transfer mode or MAC-Shared state 135g312.4.2 COMPACT cell reselection criteria 136g312.4.3 COMPACT cell reselection algorithm 136g312.4.4 Network controlled Cell reselection . 136g312.4.5 COMPACT cell reselection measurement opportunities 136g3Annex A (informative): D
45、efinition of a basic GSM or DCS 1 800 handover and RF power control algorithm . 137g3A.1 Scope 137g3A.2 Functional requirement. 137g3A.3 BSS pre-processing and threshold comparisons. 138g3A.3.1 Measurement averaging process . 138g3A.3.2 Threshold comparison process . 139g3A.3.2.1 RF power control pr
46、ocess . 139g3A.3.2.2 Handover Process . 140g3ETSI ETSI TS 145 008 V13.1.0 (2016-04)73GPP TS 45.008 version 13.1.0 Release 13A.4 BSS decision algorithm 141g3A.4.1 Internal intracell handover according to radio criteria: (Interference problems) 141g3A.4.2 Internal handover according to other criteria
47、142g3A.4.3 General considerations . 142g3A.5 Channel allocation 142g3A.6 Handover decision algorithm in the MSC 143g3Annex B (informative): Power Control Procedures . 145g3B.1 Open loop control . 145g3B.2 Closed loop control 146g3B.3 Quality based control 146g3B.4 BTS power control . 147g3B.5 Exampl
48、e 147g3B.6 Interworking between normal and fast power control for ECSD . 148g3B.7 Interworking between normal and enhanced power control (EPC) . 149g3Annex C (informative): Example Interference Measurement Algorithm . 151g3Annex D (informative): Example Selection of Modulation and Coding Schemes bas
49、ed on Link Quality Reports . 152g3Annex E (informative): Change history . 153g3History 163g3ETSI ETSI TS 145 008 V13.1.0 (2016-04)83GPP TS 45.008 version 13.1.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as fol
