1、 ETSI TS 182 023 V3.0.0 (2015-11) Network Technologies (NTECH); Core and enterprise NGN interaction scenarios; Architecture and functional description TECHNICAL SPECIFICATION ETSI ETSI TS 182 023 V3.0.0 (2015-11)2 Reference RTS/NTECH-00029-BcomsKeywords Keywords interaction, network ETSI 650 Route d
2、es Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org
3、/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in c
4、ontents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of sta
5、tus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright
6、Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyr
7、ight and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI re
8、gistered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 182 023 V3.0.0 (2015-11)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 Ref
9、erences 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Introduction 6g35 General requirements . 6g36 Scenarios relating to a level of service of IP connectivity . 6g37 Scenarios relating to a level of se
10、rvice of session establishment and control of communication session 6g38 Scenarios relating to a level of service of application level . 6g39 Scenarios relating to roaming . 6g3Annex A (informative): Change history . 7g3History 8g3ETSI ETSI TS 182 023 V3.0.0 (2015-11)4 Intellectual Property Rights I
11、PRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or
12、potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.
13、 No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Netw
14、ork Technologies (NTECH). Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions
15、). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 182 023 V3.0.0 (2015-11)5 1 Scope The present document provides the possible scenarios for: the interconnection of an Next Generation Corporate Network (NGCN) with a Next Generation Networ
16、k (NGN); and the support of NGCN capabilities within an NGN, either towards a User Equipment (UE) or to an NGCN. Unless otherwise specified by reference to other documents, all requirements relating to architecture and functional requirements are contained within the present document. The structure
17、of the present document reflects the historical structure of previous versions of it. All references to ETSI TS 124 523 8 are intended to be to the entire contents of the referenced document, which now forms the contents of the present document, and not to any part which might be implied by any head
18、ings within the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version
19、 of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI
20、cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 Void. 2 Void. 3 Void. 4 Void. 5 Void. 6 Void. 7 Void. 8 ETSI TS 124 523: “Universal Mobile Telecommunications System (UMTS); LTE; Core and enterprise Next Genera
21、tion Network (NGN) interaction scenarios; Architecture and functional description (3GPP TS 24.523)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version
22、applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI TS 182 023 V3.0.0 (2015-11)6 The
23、following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in
24、 ETSI TS 124 523 8 apply. 3.2 Abbreviations For the purposes of the present document, the terms and definitions given in ETSI TS 124 523 8 apply. 4 Introduction The provisions of the present document are contained in ETSI TS 124 523 8. 5 General requirements The provisions of the present document ar
25、e contained in ETSI TS 124 523 8. 6 Scenarios relating to a level of service of IP connectivity The provisions of the present document are contained in ETSI TS 124 523 8. 7 Scenarios relating to a level of service of session establishment and control of communication session The provisions of the pr
26、esent document are contained in ETSI TS 124 523 8. 8 Scenarios relating to a level of service of application level The provisions of the present document are contained in ETSI TS 124 523 8. 9 Scenarios relating to roaming The provisions of the present document are contained in ETSI TS 124 523 8. ETS
27、I ETSI TS 182 023 V3.0.0 (2015-11)7 Annex A (informative): Change history Date WG Doc. CR Rev CAT Title / Comment Current Version New Version 3/09/2015 NTECH(15)12_004 001 D Alignment with 3GPP TS 24.523 2.1.1 3.0.0 ETSI ETSI TS 182 023 V3.0.0 (2015-11)8 History Document history V2.1.1 January 2009 Publication V3.0.0 November 2015 Publication