1、 ETSI TS 183 008 V2.8.0 (2008-06)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);PSTN/ISDN simulation servicesTerminating Identification Presentation (TIP) andTerminating Identification Restriction (TIR);Protocol specificationE
2、TSI ETSI TS 183 008 V2.8.0 (2008-06) 2 Reference RTS/TISPAN-03154-NGN-R2 Keywords COLP, COLR, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif en
3、registre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in con
4、tents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docum
5、ent may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.o
6、rg/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTSTM, U
7、MTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 183 008 V2.8.0 (2008-06) 3 Contents Intellectual Proper
8、ty Rights4 Foreword.4 1 Scope 5 2 References 5 2.1 Normative references .5 2.2 Informative references6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .6 4 Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR).6 Annex A (informative): Sig
9、nalling flows 7 Annex B (informative): Example of filter criteria.8 Annex C (informative): Bibliography.9 History 10 ETSI ETSI TS 183 008 V2.8.0 (2008-06) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pe
10、rtaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secr
11、etariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR 000 314 (or the
12、 updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). ETSI ET
13、SI TS 183 008 V2.8.0 (2008-06) 5 1 Scope The present document specifies the stage three protocol description of the Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) services. 2 References References are either specific (identified by date of publication
14、and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future chan
15、ges of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficie
16、nt to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include t
17、he method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative
18、references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 Void. 2 Void. 3 Void. 4
19、Void. 5 Void. 6 Void. 7 Void. 8 Void. 9 Void. 10 Void. 11 Void. 12 Void. ETSI ETSI TS 183 008 V2.8.0 (2008-06) 6 13 Void. 14 Void. 15 Void. 16 Void. 17 Void. 18 ETSI TS 124 508: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); PSTN/ISDN simul
20、ation services Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR); Protocol specification (3GPP TS 24.508 Release 8)“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the us
21、er with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS
22、124 508 18 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TS 124 508 18 apply. 4 Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) The provisions of the present document are contained in TS 124 508 18. ETSI E
23、TSI TS 183 008 V2.8.0 (2008-06) 7 Annex A (informative): Signalling flows Information is contained in TS 124 508 18. ETSI ETSI TS 183 008 V2.8.0 (2008-06) 8 Annex B (informative): Example of filter criteria Information is contained in TS 124 508 18. ETSI ETSI TS 183 008 V2.8.0 (2008-06) 9 Annex C (informative): Bibliography Information is contained in TS 124 508 18. ETSI ETSI TS 183 008 V2.8.0 (2008-06) 10History Document history V2.4.1 August 2007 Publication V2.7.0 January 2008 Publication V2.8.0 June 2008 Publication
