1、 ETSI TS 186 002-1 V1.1.5 (2014-10) Core Network and Interoperability Testing (INT); Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol (BICC) or ISDN User Part (ISUP); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATI
2、ON ETSI ETSI TS 186 002-1 V1.1.5 (2014-10)2Reference RTS/INT-00113-1 Keywords BICC, interworking, ISUP, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucr
3、atif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s
4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS
5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, ple
6、ase send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission
7、of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI
8、 logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 002-1
9、V1.1.5 (2014-10)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Scenarios 8g34.1 SIP Profile A an
10、d B for interworking between SIP and BICC/ISUP . 8g34.2 SIP Profile C for Interworking Between SIP with MIME Encoding of ISUP and BICC/ISUP . 9g35 PICS proforma 11g35.1 Instructions for completing the PICS proforma 11g35.1.1 Other information . 11g35.1.2 Purposes and structure 12g35.1.3 Conventions
11、12g35.2 Identification of the implementation 13g35.2.1 Date of the statement 13g35.2.2 Implementation Under Test (IUT) identification 13g35.2.3 System Under Test (SUT) identification 13g35.2.4 Product supplier 13g35.2.5 Client 14g35.2.6 PICS contact person 14g35.3 PICS proforma tables . 14g35.3.1 Gl
12、obal statement of conformance . 14g35.3.2 Roles . 14g35.3.3 Connection types 15g35.3.4 Forward address signalling . 15g35.3.5 Role independent capabilities . 15g35.3.6 Supplementary Services Major Capabilities . 17g35.3.7 Timers . 20g35.4 Additional information for PICS 20g3Annex A (informative): Bi
13、bliography . 21g3History 23g3ETSI ETSI TS 186 002-1 V1.1.5 (2014-10)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non
14、-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursu
15、ant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docu
16、ment. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Contr
17、ol Protocol (BICC) or ISDN User Part (ISUP), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Test Suite Structure and Test Purposes (TSS Part 4: “Abstract Test Suite (ATS) and partial Protocol Implemen
18、tation eXtra Information for Testing (PIXIT) for Profile A and B“; Part 5: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) for Profile C“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may no
19、t“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 186
20、 002-1 V1.1.5 (2014-10)51 Scope The present document specifies the network PICS (Protocol Implementation Conformance Statement) of the Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol or ISDN User Part. 2 References References are either specific (i
21、dentified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found t
22、o be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents ar
23、e necessary for the application of the present document. 1 Recommendations ITU-T Q.761 to Q.764 (1999): “Signalling System No.7 - ISDN User Part“. 2 Recommendations ITU-T Q.1902.1 to Q.1902.4 (2001): “Bearer Independent Call Control protocol (Capability Set 2)“. 3 Recommendation ITU-T Q.731.7 (1997)
24、: “Stage 3 description for number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID)“. 4 Recommendation ITU-T Q.732.2 (1999): “Stage 3 description for call offering supplementary services using Signalling System No. 7: Call diversion services: -
25、 Call forwarding busy - Call forwarding no reply - Call forwarding unconditional - Call deflection“. 5 Recommendation ITU-T Q.732.7 (1996): “Stage 3 description for call offering supplementary services using Signalling System No. 7: Explicit call transfer“. 6 Recommendation ITU-T Q.737.1 (1997): “St
26、age 3 description for additional information transfer supplementary services using Signalling System No. 7: User-to-user signalling (UUS)“. 7 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. 8 IETF RFC 3262 (2002): “Reliability of Provisional Responses in Session Initiation Protocol (SIP)“.
27、 9 ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 10 ETSI EN 383 001: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); I
28、nterworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control (BICC) Protocol or ISDN User Part (ISUP) ITU-T Recommendation Q.1912.5, modified“. 11 Recommendation ITU-T Q.1912.5 (2004): “Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Co
29、ntrol protocol or ISDN User Part“. 12 Recommendation ITU-T E.164 (2010): “The international public telecommunication numbering plan“. ETSI ETSI TS 186 002-1 V1.1.5 (2014-10)613 IETF RFC 768 (1980): “User Datagram Protocol“. 14 IETF RFC 761 (1980): “DoD standard Transmission Control Protocol“. 15 Voi
30、d. 16 Recommendation ITU-T Q.731.1 (1996): “Stage 3 description for number identification supplementary services using Signalling System No. 7: Direct-dialling-In (DDI)“. 17 Recommendation ITU-T Q.731.5 (1993): “Stage 3 description for number identification supplementary services using Signalling Sy
31、stem No. 7: Connected line identification presentation (COLP)“. 18 Recommendation ITU-T Q.118 (1997): “Abnormal conditions - Special release arrangements“. 19 ITU-T Technical Report TRQ.2815 / Q.Sup45 (2003): “Requirements for interworking BICC/ISUP network with originating/destination networks base
32、d on Session Initiation Protocol and Session Description Protocol“. 20 Void. 21 RFC 4867 (2007): “RTP Payload Format and File Storage Format for the Adaptive Multi-Rate (AMR) and Adaptive Multi-Rate Wideband (AMR-WB) Audio Codecs“. 2.2 Informative references The following referenced documents are no
33、t necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Abstract Test Case (ATC): co
34、mplete and independent specification of the actions required to achieve a specific test purpose, defined at the level of abstraction of a particular Abstract Test Method, starting in a stable testing state and ending in a stable testing state Abstract Test Method (ATM): description of how an SUT is
35、to be tested, given at an appropriate level of abstraction to make the description independent of any particular realization of a Means of Testing, but with enough detail to enable abstract test cases to be specified for this method Abstract Test Suite (ATS): test suite composed of abstract test cas
36、es Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relationship, being part of a real open system which is to be studied by testing Means Of Testing (MOT): combination of equipment and procedures that can perform the derivation, selection, pa
37、rameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a conformance log PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes the PICS PIXIT proforma: document, in the form of a qu
38、estionnaire, which when completed for the SUT becomes the PIXIT Point of Control and Observation (PCO): point within a testing environment where the occurrence of test events is to be controlled and observed, as defined in an Abstract Test Method ETSI ETSI TS 186 002-1 V1.1.5 (2014-10)7pre-test cond
39、ition: setting or state in the SUT which cannot be achieved by providing stimulus from the test environment Protocol Implementation Conformance Statement (PICS): statement made by the supplier of a protocol claimed to conform to a given specification, stating which capabilities have been implemented
40、 Protocol Implementation eXtra Information for Testing (PIXIT): statement made by a supplier or implementor of an SUT (protocol) which contains or references all of the information related to the SUT and its testing environment, which will enable the test laboratory to run an appropriate test suite
41、against the SUT SIP number: number conforming to the numbering and structure specified in Recommendation ITU-T E.164 12 System Under Test (SUT): real open system in which the SUT resides user: access protocol entity at the user side of the user-network interface where a T reference point or coincide
42、nt S and T reference point applies 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACM Address Complete Message ACR Anonymous Call Rejection supplementary service AMR Adaptive Multi Rate (codec) ATC Abstract Test Case ATM Abstract Test Method ATS Abstra
43、ct Test Suite BICC Bearer Independent Call Control protocol CCBS Call Completion to Busy Subscriber supplementary service CCNR Call Completion on No Reply supplementary service CD Call Deflection supplementary service CDIV Call DIVersion supplementary service CFB Call Forwarding on Busy supplementar
44、y service CFNR Call Forwarding on No Reply supplementary service CFU Call Forwarding Unconditional supplementary service CLI Calling Line Identity CLIP Calling Line Identification Presentation supplementary service CLIR Calling Line Identification Restriction supplementary service COL Connected Line
45、 Identity COLP Connected Line Identification Presentation supplementary service COLR Connected Line identification Restriction supplementary service CONF CONFerence Call (supplementary service) CUG Closed User Group CW Call Waiting supplementary service ECT Explicit Call Transfer supplementary servi
46、ce FRJ Facility ReJect message IAM Initial Address MessageICS Implementation Conformance Statement IETF International Engineering Task Force IP Internet Protocol IRS Identification Response message ISDN Integrated Services Digital Network ISUP ISDN User Part ITU-T International Telecommunication Uni
47、on - Sector Telecommunication (T) IUT Implementation Under Test IWU InterWorking Unit LOP LOop Prevention message MCID Malicious Communication IDentification supplementary service MOT Means Of Testing PCM Pulse Code Modulation PCO Point of Control and Observation PICS Protocol Implementation Conform
48、ance Statement ETSI ETSI TS 186 002-1 V1.1.5 (2014-10)8PIXIT Protocol Implementation eXtra Information for Testing REL RELease message SDP Session Description Protocol SIP Session Initiation Protocol SUB SUBaddress supplementary service SUT System Under Test TMR Transmission Medium Requirement param
49、eter TP Test Purpose TSS Test Suite Structure TSS identification of the implementation; identification of the reference protocol specification; PICS proforma tables (containing the global statement of conformance). 5.1.3 Conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 9. Item column It contains a number that identifies the item in the table. Item description column It describes each respective item (e.g. parameters, timers, etc.). Ref
