1、 ETSI TS 186 006-2 V5.1.1 (2018-02) Core Network and Interoperability Testing (INT); Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test specification; (3GPP Release 12); Part 2: Test Su
2、ite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation,
3、including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may incl
4、ude trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the prese
5、nt document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 2 of
6、a multi-part deliverable. Full details of the entire series can be found in part 1 2. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI D
7、rafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)5 1 Scope The present document provides the Test Suite Structure and Test Purposes (TSS Universal Mobi
8、le Telecommunications System (UMTS); LTE; Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 Release 12)“. 2 ETSI TS 186 006-1 “Core Network and Interoperability T
9、esting (INT); Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification; (3GPP Release 12); Part 1: Protocol Implementation Conformance Statement (PICS)“. 3 IETF RFC 3323: “A Pri
10、vacy Mechanism for the Session Initiation Protocol (SIP)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the
11、latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the pres
12、ent document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)6 3 Definitions, symbols and
13、abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 607 1 and the following apply: Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 i.1. PICS proforma: Refer to ISO/IEC 9646-1 i.1. Point of Control and Observation: Refer to I
14、SO/IEC 9646-1 i.1. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 i.1. System Under Test (SUT): Refer to ISO/IEC 9646-1 i.1. Test Purpose (TP): Refer to ISO/IEC 9646-1 i.1. NOTE: This may contain additional information. 3.2 Symbols For the purposes of the present docum
15、ent, the symbols given in ETSI TS 124 607 1 apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 607 1 and the following apply: CLIR Calling Line Identification Restriction IUT Implementation Under Test OIP Originating Identification Presentation
16、OIR Originating Identification Restriction SUT System Under Test 4 Test Suite Structure (TSS) 4.0 Table of Test suite Structure Table 4.0-1: Test suite structure User CallingUser OIP_U01_xxx alledUser OIP_U02_xxxNetwork AS_OrigUser OIP_N01_xxx AS_TermUser OIP_N02_xxxETSI ETSI TS 186 006-2 V5.1.1 (20
17、18-02)7 4.1 Configuration 4.1.0 Introduction The scope of the present document is to test the signalling and procedural aspects of the stage 3 requirements as described in ETSI TS 124 607 1. The stage 3 description describes the requirements for several network entities and also the requirements reg
18、arding for terminal devices. Therefore several interfaces (reference points) are addressed to satisfy the test of the different entities. Therefore to test the appropriate entities the configurations below are applicable. 4.1.1 Testing of the AS The AS entity is responsible for performing and managi
19、ng services. The ISC interface is the appropriate access point for testing. Figure 4.1.1-1: Applicable interface to test AS functionalities If the ISC interface is not accessible it is also possible to perform the test of the AS using any NNI (Mw, Mg, Mx) interface (see figure 4.1.1-2). In case only
20、 the Gm interface is accessible this interface can be used instead for testing, but the verification of all requirements may not be possible. Figure 4.1.1-2: Applicable interfaces for tests using a (generic) NNI interface 4.1.2 Testing of the UE There are special clauses in the protocol standard des
21、cribing the procedures that apply at the originating and terminating user equipment. Therefore the test configuration in figure 4.1.2-1 has been chosen. ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)8 Figure 4.1.2-1: Applicable configuration to test UE functionalities 5 Test Purposes (TP) 5.1 Introduction
22、5.1.1 TP naming convention Table 5.1.1-1: TP identifier naming convention scheme Identifier: _ = supplementary service: e.g. “OIP“ = type of IUT: U User - equipment N Network = group 2 digit field representing group reference according to TSS = sequential number (001 to 999) 5.1.2 Test strategy As t
23、he base standard ETSI TS 124 607 1 contains no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standard and the PICS specification ETSI TS 186 006-1 2. The criteria applied include the following: only the requirements from the point of view of the T o
24、r coincident S and T reference point are considered; whether or not a test case can be built from the TP is not considered. 5.2 User TPs for OIP and OIR 5.2.0 Introduction All PICS items referred to in this clause are as specified in ETSI TS 186 006-1 2 unless indicated otherwise by another numbered
25、 reference. ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)9 5.2.1 Calling user equipment TSS User/Calling_User TP OIP_U01_001 OIP reference clause 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.2/2 Test purpose: Originating user sends a P-Preferred Identity. Ensure that the IUT, in order to present a
26、 complete calling user identity with which is registered, sends an INVITE message containing a P-Preferred-Identity header with valid tel or SIP URI defined as USER_URI in table 5.2.1-1. Preconditions: The user registers the public user identity. Comments: User Equipment Test Equipment INVITE barb4r
27、ight INVITE TSS User/Calling_User TP OIP_U01_002 OIP reference clause 4.5.2.1 Selection expression PICS 4.5.1/1 Test purpose: Originating user sends a P-Preferred Identity and wishes to override the default setting Presentation restricted. Ensure that the IUT, in order to present a complete calling
28、user identity with which is registered and to override the OIR default settings of presentation restricted, sends an INVITE message containing a P-Preferred-Identity header with valid tel or SIP URI defined as USER_URI and a Privacy header set to “none“. Comments: User Equipment Test Equipment INVIT
29、E barb4right INVITE User/Calling_User TP OIP_U01_003 OIP reference clause 4.5.2.1 Selection expression PICS 4.5.1/1 Test purpose: Originating user sends an anonymous From header and wishes to override the default setting Presentation not restricted. Ensure that the IUT, in order to override the OIR
30、default settings of presentation not restricted, sends an INVITE message not containing a P-Preferred-Identity header and containing a Privacy header set to “id“ or “header“ and containing an anonymous From header. The convention for configuring an anonymous From header is described in IETF RFC 3323
31、 3 and should be followed; i.e. From: “Anonymous“ ;tag= xxxxxx. Preconditions: User Equipment Test Equipment INVITE barb4right INVITE Table 5.2.1-1 Values for test purposes OIP_U02_001 USER_URI VA_1 tel: local number VA_2 tel: global number VA_3 tel: local number ; phone-context= particular phone pr
32、efix. VA_4 tel: local number ; phone-context= domainname VA_5 tel: local number; isub= ISDN Subadress VA_6 SIP URI sip:user:passwordhost:port;uri-parameters VA_7 sip URI: local number host:port;uri-parameters VA_8 sip URI: global number host:port;uri-parameters VA_9 sip URI: local number ; phone-con
33、text= particular phone prefix host:port;uri-parameters ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)10 5.2.2 Called user equipment TSS User/Called_User TP OIP_U02_001 OIP reference Selection expression PICS 4.5.1/1 Test purpose: Terminating user receives a P-Asserted identity header field. Ensure that the
34、 terminating UE, receiving a valid and compatible INVITE message containing one P-Asserted-Identity header indicating a public user identity defined as URI_USER in table 5.2.1-2, accepts the call following the basic call procedures. Comments: User Equipment Test Equipment INVITE barb4left INVITE TSS
35、 User/Called_User TP OIP_U02_002 OIP reference Selection expression PICS 4.5.1/1 Test purpose: Terminating user receives a P-Asserted identity header field. Ensure that the terminating UE, receiving a valid and compatible INVITE message containing two P-Asserted-Identity headers indicating public us
36、er identities defined as URI_USER in table 5.2.1-2 accepts the call following the basic call procedures. Comments: User Equipment SUT Test Equipment INVITE barb4left INVITE Table 5.2.2-1 Values for test purposes OIP_U02_001 and 002 USER_URI VA_1 tel: local number VA_2 tel: global number VA_3 tel: lo
37、cal number ; phone-context= particular phone prefix. VA_4 tel: local number ; phone-context= domainname VA_5 tel: local number; isub= ISDN Subadress VA_6 SIP URI sip:user:passwordhost:port;uri-parameters VA_7 sip URI: local number host:port;uri-parameters VA_8 sip URI: global number host:port;uri-pa
38、rameters VA_9 Sip URI: local number ; phone-context= particular phone prefix host:port;uri-parameters 5.2.3 Requirements on the originating network side 5.2.3.1 Actions at the AS serving the originating user TSS Network/AS_OrigUser TP OIP_N01_001 OIP reference clause 4.5.2.4 Selection expression PIC
39、S 4.5.1/2 AND PICS 4.7.1/4 Test purpose: The AS includes a Privacy header field in permanent mode. Ensure that the IUT, on receipt of an INVITE without a Privacy header or a privacy header value not “id“ or “header“, transmits an INVITE with a Privacy header set to “id“ or “header“. Preconditions: T
40、he originating user has subscribed to the OIR service in the permanent mode. Comments: Test equipment AS Test equipment INVITE barb4right barb4right INVITE 100 Trying barb4left ETSI ETSI TS 186 006-2 V5.1.1 (2018-02)11 TSS Network/AS_OrigUser TP OIP_N01_002 OIP reference clause 4.5.2.4 Selection exp
41、ression PICS 4.5.1/2 AND PICS 4.7.1/4 Test purpose: The AS removes Privacy header field “none“ in permanent mode. Ensure that the IUT, on receipt of an INVITE with a Privacy header set to “none“, transmits an INVITE with only one Privacy header set to “id“ or “header“. The Privacy header value “none
42、“ is removed. Preconditions: The originating user has subscribed to the OIR service in the permanent mode. Comments: Test equipment AS Test equipment INVITE barb4right barb4right INVITE 100 Trying barb4left TSS Network/AS_OrigUser TP OIP_N01_003 OIP reference clause 4.5.2.4 Selection expression PICS
43、 4.5.1/2 AND PICS 4.7.1/1 AND PICS 4.7.1/4 Test purpose: The AS anonymizes the identity in permanent mode. Ensure that the IUT, on receipt of an INVITE, transmits an INVITE with a Privacy header set to “user“ or transmits an INVITE with the From header anonymized. Preconditions: The originating user
44、 has subscribed to the OIR service in the permanent mode. Comments: Test equipment AS Test equipment INVITE barb4right barb4right INVITE 100 Trying barb4left TSS Network/AS_OrigUser TP OIP_N01_004 OIP reference clause 4.5.2.4 Selection expression PICS 4.5.1/2 AND PICS 4.7.1/5 Test purpose: The AS in
45、cludes a Privacy header field in temporary mode, restricted. Ensure that the IUT, on receipt of an INVITE without Privacy header, transmits an INVITE with a Privacy header set to “id“ or “header“. Preconditions: The originating user has subscribed to the OIR service in the temporary mode with defaul
46、t presentation restricted. The subscription option Restriction is set to restrict the asserted identity. Comments: Test equipment AS Test equipment INVITE barb4right barb4right INVITE 100 Trying barb4left TSS Network/AS_OrigUser TP OIP_N01_005 OIP reference clause 4.5.2.4 Selection expression PICS 4
47、.5.1/2 AND PICS 4.7.1/5 Test purpose: The AS includes a Privacy header field in temporary mode, restricted. Ensure that the IUT, on receipt of an INVITE with a Privacy header present set to a value other than “none“, transmits an INVITE with a Privacy header set to “id“ or “header“. Preconditions: T
48、he originating user has subscribed to the OIR service in the temporary mode with default presentation restricted. The subscription option Restriction is set to restrict the asserted identity. Comments: Test equipment AS Test equipment INVITE barb4right barb4right INVITE 100 Trying barb4left ETSI ETS
49、I TS 186 006-2 V5.1.1 (2018-02)12 TSS Network/AS_OrigUser TP OIP_N01_006 OIP reference clause 4.5.2.4 Selection expression PICS 4.5.1/2 AND PICS 4.7.1/1 AND PICS 4.7.1/5 Test purpose: The AS does not anonymizes the identity in temporary mode, restricted. Ensure that the IUT, on receipt of an INVITE and a Privacy header is present set to “none”, transmits an INVITE with the From header not anonymized and the Privacy header if present is not set to value “user“ or “header” or “id”. Preconditions: The originating
