1、 ETSI TS 186 010-1 V3.1.1 (2015-10) Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETS
2、I TS 186 010-1 V3.1.1 (2015-10)2Reference RTS/INT-00122-1 Keywords CONF, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectu
3、re de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mo
4、dified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
5、 Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your
6、comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETS
7、I. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo
8、are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 010-1 V3.1.1
9、 (2015-10)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance to this PIC
10、S pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 7g34.2 Identification of the implementation 8g34.2.0 Introduction. 8g34.2
11、.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 8g34.2.5 Client (if different from product supplier) 9g34.2.6 PICS contact person 9g34.3 Identification of the ETSI TS 124 605 . 10g34.3.0 Introd
12、uction. 10g34.4 Global statement of conformance . 10g34.5 Roles . 10g34.6 User role . 10g34.6.0 Introduction. 10g34.6.1 Major capabilities . 10g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 11g3History 12g3ETSI ETSI TS 186 010-1 V3.1.1 (2015-10)4Intellectual Property Rig
13、hts IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential
14、, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by
15、ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee
16、 Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statem
17、ent (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.605 Release 10)“. 2 ETSI ETS 300 406 (1995): “Methods for testing and S
18、pecification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology -
19、 Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 ETSI TS 124 147: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conferencing using the IP Multimedia (IM)
20、 Core Network (CN) subsystem; Stage 3 (3GPP TS 24.147 Release 10)“. 6 ETSI TS 124 628: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Common Basic Communication procedures using IP Multimedia (IM) Core Network (CN) subsystem; Protocol
21、specification (3GPP TS 24.628 Release 10)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version
22、of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document bu
23、t they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 186 010-1 V3.1.1 (2015-10)63 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 605 1, in ISO/IEC 9646-1 3, in ISO/IEC 964
24、6-7 4, in ISO/IEC 9646-1 3 and the following apply: Implementation Conformance Statement (ICS): A statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol
25、 ICS, profile ICS, profile specific ICS, information object ICS, etc. ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specifica
26、tion NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 605 1 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test SCS System Conformance Statement SUT System Und
27、er Test PICS Protocol ICS 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preser
28、ve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the guidance for completion given in clause 4.1. 4.1 Guidance for completing the PICS pro forma 4.1.1 Purposes and structure Th
29、e purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 605 1 may provide information about the implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the following categories of
30、 information: - guidance for completing the PICS pro forma; - identification of the implementation; - identification of the ; ETSI ETSI TS 186 010-1 V3.1.1 (2015-10)7- global statement of conformance; - roles; - user role; - major capabilities; - network role; - major capabilities; 4.1.2 Abbreviatio
31、ns and conventions The PICS pro forma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item descripti
32、on column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be support
33、ed. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. Reference column The reference column makes reference to ETSI TS 124 605 1, except where explicitly stated otherwise. Support column The support column shall be
34、 filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, dir
35、ectly or after evaluation of a conditional status). Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. ETSI ETSI TS 186 0
36、10-1 V3.1.1 (2015-10)84.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation describ
37、ed in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the supplier may provide additional comments in space at th
38、e bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. 4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
39、 Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplie
40、d in the ICS should be named as the contact person. 4.2.1 Date of the statement . 4.2.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . ETSI ETSI TS 186 010-1 V3.1
41、.1 (2015-10)94.2.4 Product supplier Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information
42、: . . ETSI ETSI TS 186 010-1 V3.1.1 (2015-10)104.2.6 PICS contact person (A person to contact if there are any queries concerning the content of the ICS) Name: . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.3 Identification of the ETSI TS 124 605 4.3.0 In
43、troduction This PICS pro forma applies to the following standard: ETSI TS 124 605 1: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS
44、 24.605 Release 10)“. 4.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the specification. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the
45、 implementation is non-conforming, on pages attached to the PICS pro forma. 4.5 Roles Table 4.1: Roles Item Item description Reference Status Support 1 User 4.5.2.1/ 1 o.12 Network 4.5.2.2/ 1 o.1o.1: It is mandatory to support exactly one of these items. Comments: ETSI ETSI TS 186 010-1 V3.1.1 (2015
46、-10)114.6 User role 4.6.0 Introduction This clause contains the PICS pro forma tables related to the user role. They need to be completed only for user implementations: Prerequisite: 4.1/1 - user role 4.6.1 Major capabilities Table 4.2: User related requirements and options Item Item description Ref
47、erence Status Support 1 The user equipment has implemented the role of a Conference participant? 5.2.1/ 5 o 2 The user equipment is able to invite a participant using a Resource list? 4.4a 6 o Comments: 4.7 Network role 4.7.0 Introduction This clause contains the PICS pro forma tables related to the
48、 Network role. They need to be completed only for network implementations: Prerequisite: 4.1/2 - network role 4.7.1 Major capabilities Table 4.3: Network related requirements and options Item Item description Reference Status Support 1 Is the conference notification service is implemented? 5.3.3/ 5
49、o 2 It is possible to invite a participant using a REFER request? 5.3.2.5.2/ 5 o 3 It is possible to invite a participant using a Resource list? 4.4a/ 6 o 4 Is the Special REFER request handling procedure supported? 5.3.2.3.1, 4)/ 5 o 5 Is the use of preconditions supported? 5.3.2.3.1, 4)/ 5 o 6 Does the network support the Originating Identification Restriction service? 4.6.5/ 1 o 7 Does the network support the Terminating Identification Restriction service? 4.6.3/ 1 o 8 Does the network support the Anonymous C
