1、 ETSI TS 186 014-1 V2.2.1 (2015-06) Core Network and Interoperability Testing (INT); Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; 3GPP Release 10; Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 186 014-1 V2.2.
2、1 (2015-06)2 Reference RTS/INT-00119-1 Keywords CDIV, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N
3、 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the
4、prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the prese
5、nt document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of t
6、he following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of t
7、he PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of
8、ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)3 Content
9、s Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Protocol Implementation Conformance State
10、ment proforma . 7g34.1 Instructions for completing the PICS proforma 7g34.1.1 More detailed instructions are given at the beginning of the different clauses of the PICS proforma 7g34.1.2 Abbreviations and conventions . 7g34.2 Identification of the implementation 8g34.2.0 General introduction . 8g34.
11、2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 9g34.2.5 Client 9g34.2.6 PICS contact person 9g34.3 PICS proforma tables . 9g34.3.1 Global statement of conformance . 9g34.3.2 Service capabilit
12、ies . 10g3History 13g3ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-membe
13、rs, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to
14、 the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.
15、Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering Communication Diversion (CDIV), as identified below: Part 1: “Protocol Implementation Conforma
16、nce Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should no
17、t“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The
18、Communications Diversion (CDIV) services enables the diverting user, to divert the communications addressed to the diverting user to another destination. ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)5 1 Scope The present document specifies the Protocol Implementation Conformance Statement (PICS) for Commu
19、nications Diversion (CDIV) services, ETSI TS 124 604 1. A further part of the present document specifies the Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; Protoc
20、ol specification (3GPP TS 24.604 Release 10)“. 2 ETSI TS 124 628: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Common Basic Communication procedures using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP T
21、S 24.628 version 10.2.0 Release 10)“. 3 ETSI TS 124 607 “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network
22、 (CN) subsystem; Protocol specification (3GPP TS 24.607 version 10.0.0 Release 10) “. 4 ETSI TS 124 608: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Terminating Identification Presentation (TIP) and Terminating Identification Restri
23、ction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.608 Release 10)“. 5 ETSI TS 124 611: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Anonymous Communication Rejection (ACR) and Commun
24、ication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.611 version 10.2.0 Release 10)“. 6 ETSI TS 124 629: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Explicit Communication Tra
25、nsfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.629 Release 10)“. ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)6 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non
26、-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long
27、 term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework
28、; Part 1: General concepts“. i.2 ISO/IEC 9646-3: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)“. i.3 ISO/IEC 9646-7: “Information technology; Open Systems Interconnection; Conformance testin
29、g methodology and framework; Part 7: Implementation Conformance Statements“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 i.1 and ISO/IEC 9646-3 i.2 apply. 3.2 Abbreviations For the purposes of the present
30、 document, the following abbreviations apply: ATS Abstract Test Suite CDIV Communication DIVersion CDIVN Communication DIVersion Notification CFB Communication Forwarding Busy CFNL Communication Forwarding on No Logged-in CFNR Communication Forwarding No Reply CFU Communication Forwarding Unconditio
31、nal ICB Incoming Communications Barring ICS Implementation Conformance Statement IP Internet ProtocolIUT Implementation under Test OCB Outgoing Communication Barring OIP Originating Identification Presentation OIR Originating Identification Restriction PICS Protocol Implementation Conformance Statem
32、ent PIXIT Protocol Implementation eXtra Information for Testing SIP Session Initiation Protocol SUT System Under Test TIP Terminating Identification Presentation TIR Terminating Identification Restriction TP Test Purpose UE User Equipment URI Universal Resource Identifier ETSI ETSI TS 186 014-1 V2.2
33、.1 (2015-06)7 4 Protocol Implementation Conformance Statement proforma 4.1 Instructions for completing the PICS proforma 4.1.1 More detailed instructions are given at the beginning of the different clauses of the PICS proforma The supplier of the implementation shall complete the PICS proforma in ea
34、ch of the spaces provided. If necessary, the supplier may provide additional comments separately in clause 4. The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in specifications 1 to 6 may provide information about the imp
35、lementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: instructions for completing the PICS proforma; identification of the implementation; product supplier; client; PICS contact person; PICS proforma tables (containing the glo
36、bal statement of conformance). 4.1.2 Abbreviations and conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 i.3. Item column It contains a number that identifies the item in the table. Item description column It descri
37、bes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the CDIV specification 1, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 i.3, are used for the status column: m mandatory - the capability is r
38、equired to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the support column is required. o optional - the capability may be supported or not. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an in
39、teger which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)8 ci conditional - the requirement on the capability (“m“, “o“ or “n/a“) depends on the support of other optional
40、or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is omitted, “ELSE n/
41、a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the specification(s) 1 to 6. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 i.3, are us
42、ed for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A or n/a no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of the implementation 4.2.0 General introduction
43、Identification of the Implementation Under Test (IUT) and the system in which it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should b
44、oth be filled in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person. 4.2.1 Date of the statement Date of the statement: 4.2.2 Implementation Under Test (IUT) identification IUT name: IUT version: 4.2.3 System Under T
45、est (SUT) identification SUT name: Hardware configuration: Operating system: ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)9 4.2.4 Product supplier Name: Address: Telephone number: Facsimile number: Additional information: 4.2.5 Client Name: Address: Telephone number: Facsimile number: Additional informati
46、on: 4.2.6 PICS contact person Name: Telephone number: Facsimile number: Additional information: 4.3 PICS proforma tables 4.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? ETSI ETSI TS 186 014-1 V2.2.1 (2015-06)10 4.3.2 Service capabilities Table 1: Communicat
47、ion DIVersion services Item Item description Reference Status Support 1 Communication Forwarding Unconditional (CFU) is supported? 1, 4.2.1 o 2 Communication Forwarding on Busy user (CFB) is supported? 1, 4.2.1 o 3 Communication Forwarding on No Reply (CFNR) is supported? 1, 4.2.1 o 4 Communication
48、Deflection immediate response (CDi) is supported? 1, 4.2.1 o 5 Communication Deflection during alerting (CDa) is supported? 1, 4.2.1 o 6 Communication Forwarding on Not Logged-in (CFNL) is supported? 1, 4.2.1 o 7 Communication Forwarding on Subscriber Not Reachable (CFNRc) 1, 4.2.1 o Table 2: Networ
49、k capabilities Item Item description Reference Status Support 1 Is the served user notified by sending a MESSAGE request after a period of time according to the timer value TCDIV_IND as defined in clause 4.8.3 that can be provided by the user? 1, 4.5.2.6.5 o 2 The AS initiates an announcement to be included towards the originating user in order to inform about the diversion? 1, 4.5.2.6.4 o 3 The Communication Diversion Notification (CDIVN) procedure of the served user is supported? 1, 4.5.2.6.5.1
