1、 Appendix G Engineering CAD however, the issues may only be decided by voting members. A simple majority of voting members is required to pass an issue. The chairman is permitted to vote and reserves the privilege of breaking a tie. The FORD GDT TC Chairman will be elected by the Ford GDT TC and end
2、orsed by the FECDSC. The FORD GDT TC Chairman will be seated on the FECDSC and will be designated the primary sponsor of dimensioning and tolerancing standard(s) contained therein. The Ford GDT TC will elect a Secretary and any other officers, as the members may deem necessary. The Ford GDT TC will
3、keep and issue meeting minutes. These will be distributed to all members, the committee champion, and any other people or organizations the Ford GDT TC deems should be informed. Responsibility for final certification of GDT trainers qualified to train within Ford Motor Company will rest with the des
4、ignated authority within the committee. Any Changes to this charter must be agreed between the committee champion and the Ford GDT TC. Notes: 1. GDT=Geometric Dimensioning and Tolerancing 2. For the current Ford Motor Company adopted dimensioning and tolerancing standards, see the Ford Motor Company Engineering CAD & Drafting Standards which reside at: http: or http:/ (suppliers)
