1、 FECDS B-2 Engineering CAD & Drafting Standards Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. Version 28 TOC Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20021231B21 Printed copies are uncontrolled.DRAWING
2、NUMBERING 1 INTRODUCTION (RESERVED) 2 DEFINITIONS 2.1 PRODUCT DRAWINGS 2.1.1 Part numbers are assigned by the electronic release system, if the part has been used before and the Basic Number and Name is known to the Database. Standard and Utility Part Numbers are assigned by Program and Pre-Producti
3、on Management (PPM) Core. For Part Numbers that are new to the electronic release system, see procedure FAP03145. 2.1.2 The letters I, O, Q and W are not to be used as Design Variant or Change Level Indicators. 2.2 PRODUCT LAYOUT NUMBERS. 2.2.1 Allocated within the design areas, by using the global
4、database within the MPNR website: https:/ 2.2.2 Prototype/Experimental Part Numbers are assigned by the Design Responsible Engineering Activity if required for local communication. 2.3 COMPOSITION OF DRAWING NUMBERS FOR MANUFACTURING. 2.3.1 The drawing number, entered into the title block of the drawing is specified by the Ford Global Manufacturing Standards. Please refer to F-MANUFACTURING DATA standard number w-FX1:MANUFACTURING DATA NUMBERING for most current information. http:/ 3 REQUIREMENTS (RESERVED) 4 SPECIFICATIONS (RESERVED) 5 ADDENDUM (RESERVED)
