1、 Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. Version 28 TOC Engineering CAD & Drafting Standards FECDS D-8 PRODUCT DATA QUALITY Notice to all FECDS Subscribers: The FECDS Committee was contacted in 2006 and asked to consider the ado
2、ption of the Automotive Industry Action Group (AIAG) standard governing the quality of CAD models in order to ensure that Ford Motor Company maintain a consentient measure of CAD quality throughout its global organizations. This D-8 standard is a draft standard which references the AIAG standard. We
3、 invite comments and suggestions by our subscribers in regard to this draft standard. We can be contacted via our website at http:/. Subscribers who cannot access the website are asked to e-mail their comments to . The subject AIAG standard may be obtained within Ford Motor Company by contacting the
4、 Ford Research Library & Information Service at http:/. Those external to Ford Motor Company desiring to review the publication should contact the AIAG at http:/www.aiag.org. 1 INTRODUCTION 1.1 The publication SASIG-Product Data Quality for the Global Automotive Industry 2004 published by the Automo
5、tive Industries Action Group (AIAG) has been adopted for the measurement of the quality of CAD databases. 1.2 Other Standards and Publications referenced in this AIAG publication have not been adopted by Ford Motor Company unless specifically referenced in the Ford Motor Company Engineering CAD & Drafting Standards. 2 DEFINITIONS (Reserved) 3 REQUIREMENTS (Reserved) 4 SPECIFICATIONS (Reserved) 5 ADDENDUM (Reserved) Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20080630D8 Draft1 Printed copies are uncontrolled.
