1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 10 N-STATUS Replaced by WSS-M13P13-A L. Schmalz, FNA 2004 02 27 Revised Para 3.0 inserted; para 3.5, 3.6, 4 deleted 1969 06 30 Released COY2-958494 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of
2、 1 GREASE - SYNTHETIC LUBRICANT ESA-M1C152-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a synthetic grease. 2. APPLICATION This specification was released originally for material used as a lubricant for steering linkages and similar parts as specified. 3. RE
3、QUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Materials suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A) 3.1 COMPOSITION Unsaturated Primary Aliphatic Amine Salts of 12 - 18 Dibasic Acids Plexol 201, max 0.5% Unsaturated Primary Aliphatic Imides of Balance Dibasic Acids 3.2 WORKED PENETRATION, (mm/10) 250 - 350 (ASTM D 217, worked 60 strokes) 3.3 DROPPING POINT, min 58 oC (ASTM D 566) 3.4 OIL SEPARATION None (96 hours)
