1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 07 24 Revised Updated & Renumbered 1991 06 20 NB00E10043064045 Updated, added para 3.14 1963 06 29 AS1-960 Released ESB-M2E12-A Printed copies are uncontrolled Page 1 of 2 Copyright 2002, Ford Global Te
2、chnologies, Inc. FIBERBOARD (PANEL), BENDING GRADE, ASPHALT FREE ESB-M2E12-A 1. SCOPE The materials defined by this specification are either laminated, or cylinder machine built-up boards of good composition and of suitable construction to allow for scoring and bending. 2. APPLICATION This specifica
3、tion was released originally for materials used for the construction of deck sides, glove compartments, luggage compartments, front and sides, and other applications specified by engineering requiring bending or scoring. The materials shall be suitable for use as a base for ink decorated, pyroxylin
4、or equivalent coated panel boards. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 APPEARANCE (FLTM BI 109-01) The color, pattern, and finish sha
5、ll match the approved Design Center master sample, or shall be as specified on the engineering drawing. 3.3 WEIGHT, min 1270 g/m2 (1.78 - 1.91 mm) 3.4 SEASONING To minimize warpage, distortions, and dimensional changes, the materials covered by this specification shall be properly seasoned for at le
6、ast 5 days before being die cut. 3.5 MOISTURE CONTENT 4 - 9 % (ASTM D 644, 100 x 100 mm samples) 3.6 WATER ABSORPTION, max 30 % (SAE J315, 1-1/2 h immersion) ENGINEERING MATERIAL SPECIFICATION ESB-M2E12-A Page 2 of 2 Copyright 2002, Ford Global Technologies, Inc. 3.7 WARP, max (FLTM BS 002-01, 1-1/2
7、 h water immersion) WMD 5 % AMD 11 % 3.8 DIMENSIONAL STABILITY (SAE J 315) Expansion, % Contraction, % WMD + 0.5 - 0.5 AMD + 2.0 - 1.7 3.9 BURSTING STRENGTH 1.1 MPa/mm (ASTM D 2529, average of 5 bursts on each side of specimen) 3.10 STIFFNESS, min (ASTM D 747, direct reading at 5 angle, 0.28 N.m load, 51 mm span, 25 x 100 mm sample) WMD 1.78 - 1.91 mm 70 AMD 1.78 - 1.91 mm 18 3.11 STAINING (FLTM AN 101-03) The material shall contain no asphalt or other resins which will cause staining of the contact fabric. 3.12 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute
