1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 01 06 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 08 31 Revised Para 3.0 inserted; para 3.21 & 4 deleted 1983 07 25 Released C5N3-DR601043-E Printed copies are uncontrolled Copyright 2010, Ford Global Technologies,
2、LLC Page 1 of 4 DIESEL FUEL, CLIMATIZED #2-D - INITIAL FILL ESE-M4C12-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a refined middle distillate petroleum product with controlled cetane number, cloud point, pour point and aromatic levels. 2. APPLICATION This s
3、pecification was released originally for a “climatized“ #2-D diesel fuel used for initial fill. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 C
4、ETANE NUMBER 45 min (ASTM D 613) 3.2 CLOUD POINT, max -25 C (ASTM D 2500) 3.3 POUR POINT, max -35 C (ASTM D 97) 3.4 VISCOSITY, AT 40 C 1.7 - 4.1 mm2/s (ASTM D 445) 3.5 WATER AND SEDIMENT, max 0.05% (ASTM D 1796) 3.6 ASH CONTENT, max 0.01% (ASTM D 482) 3.7 CARBON RESIDUE ON 10% RESIDUUM, max 0.20% (A
5、STM D 524) 3.8 SULFUR CONTENT, max 0.4% (ASTM D 129 or D 1552) 3.9 COPPER CORROSION, max 2 (ASTM D 130) 3.10 FERROUS CORROSION (ASTM D 665, modified) Diesel fuel shall be ferrous rust inhibited to “b+“ or better. ENGINEERING MATERIAL SPECIFICATIONESE-M4C12-A Printed copies are uncontrolled Copyright
6、 2010, Ford Global Technologies, LLC Page 2 of 4 Test Method: Test per Procedure “A“, ASTM D 665 except at follows: . Diesel fuel shall be used in place of turbine oil. . Test temperature to be 38 C. . In lieu of the distilled water specified, use 30 mL of solution prepared by dissolving the followi
7、ng in 1L of distilled water. Na2SO4148 mg Na Cl 165 mg Na HCO3138 mg (This provides water with 100 ppm each of SO4, Cl, and HCO3ions.) . Test period to be 5 h. . Rate corrosion as follows: Portion of Surface Rusted Rating None a (pass) Less than 0.2% b+ (pass) 0.2 to 5% b+ (borderline) 5 to 25% b (f
8、ail) 25 to 50% c (fail) 50 to 75% d (fail) 75 to 100% e (fail) 3.11 OXIDATION STABILITY, max 1.5 mg/100 mL (ASTM D 2274) 3.12 METAL DEACTIVATOR Shall contain, in addition to an anti-oxidant, a suitable organic metal deactivator to improve the storage stability of the fuel when in contact with metal
9、surfaces and to minimize the effect of soluble metallo-organic compounds present in the fuel. The metal deactivator shall have a stabilizing effect equivalent to 0.28 kg min of N, N disalicylidene propylene diamine per 100,000 liters of fuel (or as otherwise specified). 3.13 DISTILLATION (ASTM D 86)
10、 Evaporation Temperature, C Initial boiling point Record 10% 245 max 50% 280 max 90% 270 - 320 End point 350 max Residue, % Record ENGINEERING MATERIAL SPECIFICATIONESE-M4C12-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 4 3.14 HYDROCARBON COMPOSITION (AST
11、M D 1319) Aromatics, max 35% Olefins and saturates Remainder 3.15 FLASH POINT, min 55 C (ASTM D 93) 3.16 SPECIFIC GRAVITY AT 16 C 0.820 - 0.860 kg/L (ASTM D 1298) (33 - 41 API) 3.17 ODOR Shall have the usual characteristic odor of diesel fuel. 3.18 COLOR May include a dye in accordance with standard
12、 practice for purpose of vendor and user identification. 3.19 ADDITIVES May contain the following nonmetallic additives: Anti-oxidant, antistatic additive, cetane improver, corrosion inhibitor, dehazer, dispersant, dye, exhaust particulate depressant, pour depressant, smoke depressant or wax crystal
13、 modifier (cloud point depressant). 3.20 CERTIFICATION Supplier shall certify that the diesel fuel is a formula that has been tested and meets Ford Motor Company requirements as stated in this specification. Technical evidence of these data and manufacturing limits must be tabulated on the attached
14、form. This certification shall be by the suppliers Director of Research or other authorized official and submitted to the responsible Ford purchasing activity. This information will then be forwarded to the materials activity of the Engine Product Engineering Office or to the product engineering off
15、ice responsible for source approval. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 FLAMMABILITY This material represents a potential fire hazard. The Manufacturing Engineering Department or other
16、 responsible activity shall notify both the Security and Safety Units of its presence to assure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. 5.2 SAMPLING AND SUBMISSION OF SAMPLES (ASTM D 270) 5.3 Quality Control record
17、s must be made available to the responsible product engineering office upon request. ENGINEERING MATERIAL SPECIFICATIONESE-M4C12-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 4 of 4 Volatility Grade_ Date_ Company_ Refinery Location_ Specification_ Actual Test
18、Results Manufacturing (Typical) Limits Cetane Number (ASTM D 613) _ _ Cetane Index (ASTM D 976) _ _ Cloud Point, (ASTM D 2500) _C _C Pour Point, (ASTM D 97) _C _C Viscosity at 40 C (ASTM D 445) _mm2/s _mm2/s Water and Sediment (ASTM D 1796) _% _% Ash Content (ASTM D 482) _% _% Carbon Residue on 10%
19、Residuum _% _% (ASTM D 524) Sulfur Content (ASTM D 129 or _% _% D 1552) Copper Corrosion (ASTM D 130) _ _ Ferrous Corrosion (ASTM D 665, _ _ Modified) Oxidation Stability (ASTM D 2274) _mg/100 mL _mg/100 mL Distillation (ASTM D 86) _C _C Initial Boiling Point _C _C 10% Evaporated _C _C 50% Evaporate
20、d _C _C 90% Evaporated _C _C End Point _C _C Recovery _% _% Residue _% _% Hydrocarbon Composition (ASTM D 1319) Aromatics _% _% Olefins _% _% Saturates _% _% Hydrocarbon Ratio _ _ Electrical Conductivity _ps/m _ps/m (ASTM D 2624) Flash Point (ASTM D 93) _C _C Specific Gravity at 16 C _kg/L _kg/L (AS
21、TM D 1298) Type and Manufacturing Additives Formula Limits Antioxidant _ _ Antistatic Additive _ _ Cetane Improver _ _ Corrosion Inhibitor _ _ Dehazer _ _ Deicer _ _ Dispersant _ _ Exhaust Particulate Depressant _ _ Metal Deactivator _ _ Pour Depressant _ _ Wax Crystal Modifier _ _ Miscellaneous _ _ Signature_ Title_
