1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2012 07 25 N-Status A. Wedepohl, FNA 2005 01 31 Revised Inserted 3.0; Deleted 3.4, 4 1963 06 24 Released F6-1069 Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 SOLDER - RESIN CORED (63-37) NOT FOR NE
2、W DESIGN ESF-M11A5-A 1. SCOPE The material defined by this specification is an activated resin cored solder of 63-37 composition that is a round wire or preform shape. 2. APPLICATION This specification was released originally for material used for soldering electrical connections and other applicati
3、ons where the use of a corrosive flux must be avoided. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 CHEMICAL COMPOSITION (ASTM B 32) Tin 62.0
4、 64.0 Zinc 0.005 max Antimony 0.40 max Bismuth 0.25 max Copper 0.08 max Iron 0.02 max Aluminum 0.005 max Total Other Elements 0.08 max Lead Remainder 3.2 FLUX (ASTM B 284) The size of the flux core shall be as specified on the purchase notice and/or engineering drawing. See General Information (par
5、agraph 5.1). The composition of the flux shall be a resin base with such plasticizers or activators as to be classified “non corrosive“ by usual humidity tests, whether or not it is removed after soldering. 3.3 PHYSICAL PROPERTIES Solidus 183 C Liquidus (Eutectic) 183 C 4. GENERAL INFORMATION The in
6、formation given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. ENGINEERING MATERIAL SPECIFICATION ESF-M11A5-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 4.1 WE
7、IGHT PERCENTAGE OF FLUX For most applications, a solder designated as 2.2% flux by weight is generally used. In other applications, where excessive amounts of resin may be undesirable, 1.1% flux by weight solder may be used. A 3.3% flux by weight solder may be specified when a larger amount of flux is required.
