FORD ESF-M2C70-A-2009 OIL INHIBITED (600) - HYDRAULIC AND LUBRICATING TO BE USED WITH FORD WSS-M99P1111-A 《液压和润滑用防腐(600)油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:赵齐羽 文档编号:746140 上传时间:2019-01-14 格式:PDF 页数:2 大小:24.48KB
下载 相关 举报
FORD ESF-M2C70-A-2009 OIL INHIBITED (600) - HYDRAULIC AND LUBRICATING  TO BE USED WITH FORD WSS-M99P1111-A  《液压和润滑用防腐(600)油  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD ESF-M2C70-A-2009 OIL INHIBITED (600) - HYDRAULIC AND LUBRICATING  TO BE USED WITH FORD WSS-M99P1111-A  《液压和润滑用防腐(600)油  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 10 26 N-STATUS No known use. No Replacement Named D. DiGregorio, NA 2004 05 11 Revised Para 3.0 inserted; para 3.11 & 4 deleted 1963 06 24 Released F6-1069 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page

2、 1 of 2 OIL, INHIBITED (600) - HYDRAULIC AND ESF-M2C70-A LUBRICATING NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a refined mineral oil compounded with suitable additives to improve its resistance to oxidation and its rust preventive characteristics. 2. APPLIC

3、ATION This specification was released originally for oil used as a special purpose hydraulic oil in tight hydraulic systems and as a special purpose lubricant in recirculating systems operating in a temperature range over 54 C with minimum water contamination and where gumming and oxidation must be

4、kept to a minimum. It should not be used in systems equipped with diatomaceous earth type filters. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.

5、1 VISCOSITY AT 40 C 135 - 165 cSt (mm2/s) (ASTM D 445) 3.2 VISCOSITY INDEX, min 85 (ASTM D 2270) 3.3 FLASH POINT, min 205 C (ASTM D 92) 3.4 FIRE POINT, min 233 C (ASTM D 92) 3.5 POUR POINT, max -10 C (ASTM D 97) 3.6 COPPER STRIP CORROSION Pass (ASTM D 130 at 100 C) 3.7 RUST PREVENTIVE CHARACTERISTIC

6、S No rust (ASTM D 665) 3.7.1 Distilled Water, min 24 h 3.7.2 Synthetic Sea Water, min 24 h ENGINEERING MATERIAL SPECIFICATIONESF-M2C70-A Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.8 OXIDATION STABILITY 750 h (ASTM D 943, min time before oil reaches acid #2.0) 3.9 RESISTANCE TO FOAMING No foam (ASTM D 892) 3.10 CONTAMINATION The material shall be free from acid, alkali, moisture, tarry or suspended matter, thickeners, or other foreign matter. It must also be free from objectionable odors.

展开阅读全文
相关资源
猜你喜欢
  • ASTM D5603-2001(2008) Standard Classification for Rubber Compounding Materials&x2014 Recycled Vulcanizate Particulate Rubber《橡胶复合材料-再生颗粒性硫化橡胶的标准分类》.pdf ASTM D5603-2001(2008) Standard Classification for Rubber Compounding Materials&x2014 Recycled Vulcanizate Particulate Rubber《橡胶复合材料-再生颗粒性硫化橡胶的标准分类》.pdf
  • ASTM D5603-2001(2015) Standard Classification for Rubber Compounding Materials&x2014 Recycled Vulcanizate Particulate Rubber《橡胶化合材料的标准分类 再生颗粒性硫化橡胶》.pdf ASTM D5603-2001(2015) Standard Classification for Rubber Compounding Materials&x2014 Recycled Vulcanizate Particulate Rubber《橡胶化合材料的标准分类 再生颗粒性硫化橡胶》.pdf
  • ASTM D5604-1996(2006) Standard Test Methods for Precipitated Silica-Surface Area by Single Point B E T Nitrogen Adsorption《沉淀二氧化硅的标准试验方法 用单点B E T 氮的吸附法沉淀的硅表面积》.pdf ASTM D5604-1996(2006) Standard Test Methods for Precipitated Silica-Surface Area by Single Point B E T Nitrogen Adsorption《沉淀二氧化硅的标准试验方法 用单点B E T 氮的吸附法沉淀的硅表面积》.pdf
  • ASTM D5604-1996(2012) Standard Test Methods for Precipitated SilicaSurface Area by Single Point B E T Nitrogen Adsorption 《沉淀二氧化硅的标准试验方法 通过单点B E T 氮吸附法测定的表面积》.pdf ASTM D5604-1996(2012) Standard Test Methods for Precipitated SilicaSurface Area by Single Point B E T Nitrogen Adsorption 《沉淀二氧化硅的标准试验方法 通过单点B E T 氮吸附法测定的表面积》.pdf
  • ASTM D5604-1996(2017) Standard Test Methods for Precipitated Silica&x2014 Surface Area by Single Point B E T Nitrogen Adsorption《沉淀二氧化硅标准试验方法 表面积单点B E T 氮吸附》.pdf ASTM D5604-1996(2017) Standard Test Methods for Precipitated Silica&x2014 Surface Area by Single Point B E T Nitrogen Adsorption《沉淀二氧化硅标准试验方法 表面积单点B E T 氮吸附》.pdf
  • ASTM D5605-1994(2007) Standard Practice for Styrene-Butadiene Rubber (SBR)&8212 Establishing Raw Mooney Viscosity Target Values《苯乙烯聚丁橡胶(SBR)标准规范-原始穆尼粘度目标值的确定》.pdf ASTM D5605-1994(2007) Standard Practice for Styrene-Butadiene Rubber (SBR)&8212 Establishing Raw Mooney Viscosity Target Values《苯乙烯聚丁橡胶(SBR)标准规范-原始穆尼粘度目标值的确定》.pdf
  • ASTM D5605-1994(2011) Standard Practice for Styrene-Butadiene Rubber (SBR)Establishing Raw Mooney Viscosity Target Values 《苯乙烯聚丁橡胶(SBR)标准规程 原始穆尼粘度目标值的确定》.pdf ASTM D5605-1994(2011) Standard Practice for Styrene-Butadiene Rubber (SBR)Establishing Raw Mooney Viscosity Target Values 《苯乙烯聚丁橡胶(SBR)标准规程 原始穆尼粘度目标值的确定》.pdf
  • ASTM D5605-1994(2016) Standard Practice for Styrene-Butadiene Rubber (SBR)&x2014 Establishing Raw Mooney Viscosity Target Values《丁苯橡胶的标准实施规程 (SBR)&x2014 原始穆尼粘度目标值的确定》.pdf ASTM D5605-1994(2016) Standard Practice for Styrene-Butadiene Rubber (SBR)&x2014 Establishing Raw Mooney Viscosity Target Values《丁苯橡胶的标准实施规程 (SBR)&x2014 原始穆尼粘度目标值的确定》.pdf
  • ASTM D5606-2001(2006)e1 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock《甲苯二氰酸盐(TDI)原料用甲苯的标准规范》.pdf ASTM D5606-2001(2006)e1 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock《甲苯二氰酸盐(TDI)原料用甲苯的标准规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1