1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2011 03 01 N-Status No replacement named A Pan, APA 2005 01 10 Revised Inserted 3.0; Deleted 3.5 & 4 1963 06 28 Released F6-1076 Printed copies are uncontrolled Copyright 2011, Ford Global Technologies, LLC Page 1 of 1 MYLAR, TRANSFER
2、FILM - HOT STAMPING ESF-M4D110-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a mylar film with pigmented base that is transferred to plastic parts by hot stamping. 2. APPLICATION This specification was released originally for material used for the lettering o
3、n instrument cluster dials. 3. REQUIREMENTS After application on plastics (production part). 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 CYCLE TEST No change after 6 cycles Test Method (cycle): 8 h humidity (98% R.H. at 38 C) 16 h cold box (-29 C) 8 h oven (70 C) 16 h fadeometer 3.2 HUMIDITY No change (100 h, 98% R.H. at 38 C) 3.3 FADEOMETER No change (SAE J 1885, 100 h) 3.4 COLOR As specified on engineering drawing and/or release.
