1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Para No. Revisions Rev 02 2012 04 12 N Status No usage or replacement N. Benipal, NA 1978 07 13 Metricated & Retyped CF4H-RD567168-24 1963 06 25 Released F6-1073 Page 1 of 1 GASKET, CORK/RECLAIM RUBBER ESF-M8G85-A NOT TO BE
2、USED FOR NEW DESIGN 1. SCOPE: The material defined by this specification is a flexible, compressive gasket composed of medium granule cork bound with a reclaim rubber compound. 2. APPLICATION: This specification was released originally for material used as an air cleaner to carburetor gasket. 3. REQ
3、UIREMENTS: 3.1 Shall comply in all respects to the requirements as listed under Identification Number P-2265-A in ASTM F 104 and/or SAE 90R, as well as the following. 3.2 COMPRESSION SET, max 32% (ASTM D 395, Method “A“, 22 h at 70 +/- 1 C) 3.3 SUPPLIERS RESPONSIBILITY Material supplied to this spec
4、ification must be equivalent to that originally approved. Changes in formulation or processing shall not be made without prior approval as described in Supplier Procedure I-A. 4. APPROVAL OF SUPPLIERS: Suppliers to this specification must be approved by the affected product engineering office. Procedure for gaining approval of a specific material to a new/existing ES-M specification is contained in Supplier Procedure I-A. Approved new suppliers will be added to the Engineering Materials Approved Source List.
