FORD ESK-M8G217-A-2012 GASKET CORK AND NBR SBR RUBBER TO BE USED WITH FORD WSS-M99P1111-A .pdf

上传人:confusegate185 文档编号:746503 上传时间:2019-01-14 格式:PDF 页数:4 大小:24.63KB
下载 相关 举报
FORD ESK-M8G217-A-2012 GASKET CORK AND NBR SBR RUBBER  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第1页
第1页 / 共4页
FORD ESK-M8G217-A-2012 GASKET CORK AND NBR SBR RUBBER  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第2页
第2页 / 共4页
FORD ESK-M8G217-A-2012 GASKET CORK AND NBR SBR RUBBER  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第3页
第3页 / 共4页
FORD ESK-M8G217-A-2012 GASKET CORK AND NBR SBR RUBBER  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONMaterial Name Specification NumberDate Release No. Released1994 12 07 Revised and Retyped1988 02 29 SM/EQ2386TP ReleasedWP 3948-a Page 1 of 4 GASKET, CORK AND NBR/SBR RUBBER ESK-M8G217-A1. SCOPEThe mate rial defined by this specification is a granulated cork materi

2、albonded with NBR/SBR rubber compound.2. APPLICATIONThis specification was released originally for material used for sealingstrips of intake manifold gaskets.3. REQUIREMENTS3.1 STATISTICAL PROCESSSupplie rs must conform to the requirements of Ford Quality SystemStand ard Q-101. A mutually acceptable

3、 Control Plan as describedtherein is required for material/source approval. Appropriatestatist ical tools must be used to analyze process/product data sothat variation in the final product is continuously reduced.3.2 INFRARED SPECTROPHOTOMETRY AND/OR THERMAL ANALYSISFord Motor Company, at its option

4、 may conduct infrared and/ortherma l analysis of material/parts supplied to this specification.The IR spectra and thermograms established for i nitial approval shallconst itute the reference standard and shall be kept on file at thedesignated material laboratory. All samples sha ll produce IR spect

5、raand thermograms that correspond to the reference standard when testedunder the same conditions.3.3 CONDITIONING AND TEST CONDITIONSAll test values indicated herein are based on material conditionedaccording to ASTM F 104, material type 2, prior to testing and testedunder the same conditions unless

6、 otherwise specified.3.4 TEST SPECIMENS (Test Sheets)The requirements of thi s specification are valid for gasket materialof 2.0 - 4.0 mm thickness.Note: All tests shall be carried out on sample sheets with a nominalthickness as specified on Engineering drawing.ENGINEERING MATERIAL SPECIFICATIONESK-

7、M8G217-AWP 3948-b Page 2 of 4 3.4.1 Density 0.45 - 0.55 g/cm3(ASTM D 297)3.4.2 Hardness, Durometer A 44 - 52(ASTM D 2240, test specimens to beplied up to a minimum thickness of6 mm)3.4.3 Tensile Strength, min 0.6 MPa(ASTM D 152, procedure accordingto Method B, test specimen size:25 x 100 mm)3.4.4 Co

8、mpressibility and Recovery(ASTM F 36, procedure B)3.4.4.1 Compressibility 24 - 32 %(0.7 MPa load)3.4.4.1.1 Recovery, min 80 %3.4.4.2 Compressibility 50 - 60 %(2.8 MPa load)3.4.4.2.1 Recovery, min 75 %3.4.5 Heat Ageing, 168 h at 120 +/- 2 C(ASTM D 573; after aging specimens areto be conditioned for 2

9、4 h +/- 1 haccording to para 3.3)3.4.5.1 Tensile Strength, Change + 20 to + 80 %3.4.5.2 Compressibility 44 - 54 %(ASTM F 36, procedure B,2.8 MPa load)3.4.5.3 Recovery, min 80 %3.4.6 Immersion in ASTM Oil No.1,168 h at 120 +/- 2 C(ASTM F 146)3.4.6.1 Tensile Strength, Change - 20 to + 30 %3.4.6.2 Comp

10、ressibility 52 - 62 %(ASTM F 36, procedure B,2.8 MPa load)3.4.6.3 Recovery, min 75 %3.4.6.4 Volume, Change - 5 to + 5 %ENGINEERING MATERIAL SPECIFICATIONESK-M8G217-AWP 3948-b Page 3 of 4 3.4.7 Immersion in ASTM Oil No. 3,168 h at 120 +/- 2 C(ASTM F 146)3.4.7.1 Tensile Strength, Change - 80 to - 40 %

11、3.4.7.2 Volume, Change - 5 to + 20 %3.4.8 FlexibilityNo cracks, breaks or surface separation.3.4.8.1 Original material3.4.8.2 Ma terial after being subjected to heat agingaccording to para 3.4.5.3.4.8.3 Material after being subjected to immersion in ASTMOil No. 1 according to para 3.4.6.3.4.8.4 Mate

12、rial after being subjected to immersion in ASTMOil No. 3 according to para 3.4.7.Test Method: Three test specimens (25 x 200 mm)shal l be subjected to each above mentioned testcondition. Mandrel diameter shall be 5 times thethickness of material. The specimens shall be bentaround the mandrel within

13、5 +/- 1 seconds.3.4.9 Compression Set, max 75 %(ASTM D 395, Method A, 70 h at100 +/- 2 C)3.4.10 Ozone Resistance, max Rating “1“(FLTM EU-BP 1-1, except elongationto be 10 %)3.4.11 Dimensional StabilityTe st Method: Three test specimens (25 x 200 mm) are to becondit ioned according to para 3.3. Speci

14、mens are thenme asured for original length. Expose vertically hung testspeci mens in a controlled temperature and humidity chamberfor 7 days a t 38 +/- 1 C and 98 +/- 2 % relative humidity,fol lowed by 7 days at 38 +/- 1 C and 15 - 20 % relativehumidity. Length of test specimens is measured after ea

15、ch ofthese two 7 day exposure periods. Average % cha nge in lengthafte r each exposure is calculated, based on the originallength previously determined.3.4.11.1 After 7 d at 38 C and 98 +/- 2 %Relative Humidity, max + 1.5 %ENGINEERING MATERIAL SPECIFICATIONESK-M8G217-AWP 3948-b Page 4 of 4 3.4.11.2

16、After 7 d at 38 C and 15 - 20 %Relative Humidity, max - 1.5 %3.5 ADDITIONAL REQUIREMENTSSpecific requirements for material and/or manufa ctured parts shall bespecified on the Engineering drawing, Engineerin g parts specificationand/or performance specification. All critical areas with respect tothes

17、e properties shall be clearly designated on the engineeringdrawing.3.6 SUPPLIERS RESPONSIBILITYAll materials supplied to this specification must be equivalent inal l characteristics to the material upon which approval wasoriginally granted.Pri or to making any change in the properties, composition,c

18、onstr uction, color, processing or labeling of the materialorig inally approved under this specification, whether or not suchchange s affect the materials ability to meet the specificationrequir ements, the Supplier shall notify Purchasing, Toxicology andthe affected Materials Engineering activity o

19、f the proposed changesand obtain the written approval of the Materials Engineeringactivity. Test data, t est samples and a new code identification areto be submitted with the request.Substance restrictions imposed by law, regulations or Ford, apply tothe materials addressed by this document. The res

20、trictions aredefined in Engineering Materials Specification WSS-M99P9999-A1.4. APPROVAL OF MATERIALSMat erials defined by this specification must have prior approval by theresp onsible Materials Engineering activity. Suppliers desiring approvalof thei r materials shall first obtain an expression of

21、interest from theaffec ted Purchasing, Design and Materials Engineering activity. Uponrequest, the Supplier shall submit to the affected Materials Engineeringactivity a completed copy of their laboratory test reports, signed by aqualified and authorized representative of the test faci lity, demonstr

22、atingful l compliance with all the requirements of this specification (testresults, not nominal values), the material designation a nd code number, andtes t specimens for Ford evaluation. Fords engineering approval of amateri al will be based on its performance to this specification and on anassessment of suitability for intended processes and/or applications. Uponapprov al, the material will be added to the Engineering Material ApprovedSource List.

展开阅读全文
相关资源
猜你喜欢
  • BS IEC 61671-4-2016 Standard for automatic test markup language (ATML) test configuration《自动测试标记语言 (ATML) 的测试配置标准》.pdf BS IEC 61671-4-2016 Standard for automatic test markup language (ATML) test configuration《自动测试标记语言 (ATML) 的测试配置标准》.pdf
  • BS IEC 61671-5-2016 Standard for automatic test markup language (ATML) test adapter description《自动测试标记语言 (ATML) 的测试适配器描述标准》.pdf BS IEC 61671-5-2016 Standard for automatic test markup language (ATML) test adapter description《自动测试标记语言 (ATML) 的测试适配器描述标准》.pdf
  • BS IEC 61671-6-2016 Standard for automatic test markup language (ATML) test station description《自动测试标记语言 (ATML) 的测试台描述标准》.pdf BS IEC 61671-6-2016 Standard for automatic test markup language (ATML) test station description《自动测试标记语言 (ATML) 的测试台描述标准》.pdf
  • BS IEC 61691-1-1-2011 Behavioural languages VHDL Language reference manual《行为语言 VHDL语言参考手册》.pdf BS IEC 61691-1-1-2011 Behavioural languages VHDL Language reference manual《行为语言 VHDL语言参考手册》.pdf
  • BS IEC 61747-40-2-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Uniaxial flexural strength (4-point bend)《液晶显示装置 移动设备用显示保护玻璃的机械试验.pdf BS IEC 61747-40-2-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Uniaxial flexural strength (4-point bend)《液晶显示装置 移动设备用显示保护玻璃的机械试验.pdf
  • BS IEC 61747-40-3-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Biaxial flexural energy to failure (ball drop)《液晶显示装置 移动设备用显示保护玻璃.pdf BS IEC 61747-40-3-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Biaxial flexural energy to failure (ball drop)《液晶显示装置 移动设备用显示保护玻璃.pdf
  • BS IEC 61747-40-4-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Biaxial flexural strength (ring-on-ring)《液晶显示装置 移动设备用显示保护玻璃的机械试验 .pdf BS IEC 61747-40-4-2015 Liquid crystal display devices Mechanical testing of display cover glass for mobile devices Biaxial flexural strength (ring-on-ring)《液晶显示装置 移动设备用显示保护玻璃的机械试验 .pdf
  • BS IEC 61858-2-2014 Electrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS) Form-wound EIS《电气绝缘系统 对已确立绕线(EIS)改进的热评定 成.pdf BS IEC 61858-2-2014 Electrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS) Form-wound EIS《电气绝缘系统 对已确立绕线(EIS)改进的热评定 成.pdf
  • BS IEC 61865-2002 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation《架空电线 带电部分和障碍物间距离的电气元件的计算 计算方法》.pdf BS IEC 61865-2002 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation《架空电线 带电部分和障碍物间距离的电气元件的计算 计算方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1