1、 NON-PRODUCTION mTERIAL SPECIFICATION Date 1991 o9 o1 Material Name Specification Number Action Changes ALIPHATIC HYDROCARBON THINNERS M14 J1 0 O-A 1. SCOPE: This standard establishes physical and chemical properties for the following aliphatic hydrocarbon thinners: Standard Formerly: M- 14 J167 (M-
2、167) Special Spirits M-14J132 A-B (M-532A & B) Kerosene M-14 J14 7 (M-547) Petroleum Light Naphtha M- 14 J14 8 (M-548) Petroleum Naphtha M- 14 J13 6 (M-4636) Naphtha Spirits 2. APPLICATION: These thinners are used for reducing paints, enamels, and primers to the desired viscosity. 3. REQUIREMENTS: 3
3、.1 SPECIFIC GRAVITY AT 60/60 F.: (ASTM D 891) Weight/Gallon M-14J147 M-14J148 M-14J167 M-14J136 M-14J132A M-14J132B (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) .690-.712 .735-.745 .785-.795 .785-.795 .810-.820 .810-.820 6.54-6.62 6.54-6.62 3.2 3.3 FLASH POINT: Min. F. (ASTM D 56) M-14J147 M
4、-14J148 M-14J167 M-14J136 M-14J132A M-14J132B (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) O 3 110 12 o 12 o 12 o ANILINE PT. G +/- 2 C.: (ASTM D 611) M-14J147 M-14J148 M-14J167 M-14J136 M-14J132A M-14J132B (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) 56 56 60 56 63 63 3.3.1 OF LAST
5、10% DISTILLED: No higher than 2 C. above aniline point of shipment as received. 3.4 COLOR (MIN.) : (ASTM D 156) M-14J147 M-14J148 M-14J167 M-14J135 M-14J132A M-14J132B 16 16 16 16 16 10 (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) Page 1 of 2 NON-PRODUCTION mTERIAL SPECIFICATION M14 J1 0 O-A
6、 3.5 NON VOLATILE (MAX.): (ASTM D 268) M-14J147 M-14J148 M-14J167 M-14J135 M-14J132A M-14J132B (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) 0.2% 0.2% 0.2% 0.2% 1.5% 1.5% 3.6 3.7 COPPER STRIP (MAX.) : (ASTM D 130) M-14J147 M-14J148 M-14J167 M-14J135 M-14J132A M-14J132B (M-547) (M-548) (M-167)
7、 (M-4636) (M-532-A) (M-532-B) 2c 2c 2E 2E 2E 3c DISTILLATION RANGE: DEG F (ASTM D 130) M-14J147 M-14J148 M-14J167 M-14J136 M-14J132A M-14J132B (M-547) (M-548) (M-167) (M-4636) (M-532-A) (M-532-B) 1BP (Min) 95 200 310 310 323 323 10% (Min) 140 215 318 318 50% (Max) 180 2 60 350 350 90% (Max) 238 280 374 374 EP (Max) 2 90 32 O 3 95 3 95 500 500 4. STANDARD PARAGRAPHS: The following Standard Paragraphs as defined in Manufacturing Standard MJX are herewith made a part of this standard: C1, P1, P2, P3, R1, R2. Page 2 of 2
