1、 Manufacturing StandardsFord Motor Company199112 SPECTACLES - SAFETY SD3-1Engineering Standards & Printed copies are uncontrolled.Systems Engineering (ESSE) Page 1 of 11. SCOPE: This standard covers clear and filter plano safety spectacles forshielding the wearers eyes from a variety of hazards. Usa
2、ge shall bespecified by the safety engineer.1.1 Photochromic lenses are not approved for use in the Company.2. REQUIREMENTS:2.1 Safety spectacles shall conform to the latest edition of theAmerican National Standard, “Practice for Occupational and Educa-tional Eye and Face Protection“, ANSI Z87.1.2.2
3、 All spectacles and replacement lenses received at Company locationsare subject to tests in accordance with ANSI Z87.1.3. MANUFACTURERS RESPONSIBILITY:3.1 All spectacles and lens supplied to this standard must be equivalentin all characteristics to the spectacle and lens upon which approvalwas originally granted.3.2 The supplier is required to perform applicable tests, in accordancewith ANSI Z87.1, on all components supplied under this standard.3.3 The supplier is to certify that all components supplied under thisstandard conform to the latest edition of ANSI Z87.1.
