FORD SK-M5B9574-A-2010 PHOSPHATE SOLUTION ZINC PASSIVATING SOLUTION TO BE USED WITH FORD WSS-M99P1111-A 《锌钝化磷酸盐溶液 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:周芸 文档编号:748143 上传时间:2019-01-14 格式:PDF 页数:2 大小:24.59KB
下载 相关 举报
FORD SK-M5B9574-A-2010 PHOSPHATE SOLUTION ZINC PASSIVATING SOLUTION  TO BE USED WITH FORD WSS-M99P1111-A  《锌钝化磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD SK-M5B9574-A-2010 PHOSPHATE SOLUTION ZINC PASSIVATING SOLUTION  TO BE USED WITH FORD WSS-M99P1111-A  《锌钝化磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2010 03 09 N-STATUS No replacement named L. Sinclair, NA 2002 08 27 Revise Updated and renumbered 1977 09 13 SM/EQ 8257 TP Release Printed copies are uncontrolled Page 1 of 2 Copyright 2010, Ford Global Tech

2、nologies, Inc. PHOSPHATE SOLUTION, ZINC PASSIVATING SOLUTION SK-M5B9574-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a chromate (CrIII) passivating solution. 2. APPLICATION This specification was released originally for materials used as passivating agents w

3、ith zinc phosphate coatings. It is used in combination with SKM-5B9574-B Phosphate Solution, Zinc, pH Correction Agent. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials

4、 (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITION CrIII as Cr 7.0 +/- 0.5 % Test Method 10 mL of the solution are filled up to 1000 mL with distilled water. 15 mL of this solution are mixed with 10 mL diluted sulphuric acid 50 % by volume. Add 2 mL silver nitrate solution (1 %) and 10 g ammonium peroxydis

5、ulphate (NH4)2S208and heat up to boiling. After temperature is above 90 C add 10 mL of a 5 % NaCl solution. Leave boiling for 10 minutes and cool down. Add 25 mL of a 0.1 n FeSO4solution (define factor) Titrate with 0.1 n K2Cr207solution against bariumdiphenylamine sulphonate (1 mL of a 0.3 % contai

6、ning solution in water), from green to blue violet. Consumption: 6.15 +/- 0.2 mL 0.1 n FeSO4 solution 3.3 DENSITY AT 20C 1.14 +/- 0.01 g/cm3(FLTM EU-BI 2-2) ENGINEERING MATERIAL SPECIFICATION SK-M5B9574-A Page 2 of 2 Copyright 2002, Ford Global Technologies, Inc. 4. GENERAL INFORMATION The informati

7、on given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 The phosphate system released by this specification consists of the following materials: 4.1.1 Phosphate Solution, Zinc, Alkaline Cleaner SK-M5B9599-A or SK-M5B340-A 4.1.2 Phosphate Solution, Zinc, Start Up ESK-M5B337-A 4.1.3 Phosphate Solution, Zinc, Make Up ESK-M5B338-A 4.1.4 Phosphate Solution, Zinc, Accelerator SM-5B4509-A 4.1.5 Phosphate Solution, Zinc, Activating Agent SK-M5B327-A 4.1.6 Phosphate Solution, Zinc, pH Correction Agent SK-M5B9574-B

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 10637-2000 en 3316 Dental equipment - High and medium volume suction systems《牙科设备 高和中容量抽吸系统》.pdf BS EN ISO 10637-2000 en 3316 Dental equipment - High and medium volume suction systems《牙科设备 高和中容量抽吸系统》.pdf
  • BS EN ISO 10644-2009 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV《带平垫圈的螺钉和垫圈组件 垫圈硬度等级200 HV和300 HV》.pdf BS EN ISO 10644-2009 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV《带平垫圈的螺钉和垫圈组件 垫圈硬度等级200 HV和300 HV》.pdf
  • BS EN ISO 10650-2015 Dentistry Powered polymerization activators《牙科学 动力聚合活化剂》.pdf BS EN ISO 10650-2015 Dentistry Powered polymerization activators《牙科学 动力聚合活化剂》.pdf
  • BS EN ISO 10651-4-2009 Lung ventilators - Part 4 Particular requirements for operator-powered resuscitators (ISO 10651-4 2002)《肺换气机 第4部分 对操作人员控制的复苏器的详细要求(ISO 10651-4-2002)》.pdf BS EN ISO 10651-4-2009 Lung ventilators - Part 4 Particular requirements for operator-powered resuscitators (ISO 10651-4 2002)《肺换气机 第4部分 对操作人员控制的复苏器的详细要求(ISO 10651-4-2002)》.pdf
  • BS EN ISO 10651-6-2009 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home-care ventilatory support devices《医用肺通气器 基本安全性和必要.pdf BS EN ISO 10651-6-2009 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home-care ventilatory support devices《医用肺通气器 基本安全性和必要.pdf
  • BS EN ISO 10664-2014 Hexalobular internal driving feature for bolts and screws《螺栓和螺钉用内板拧的六角花形》.pdf BS EN ISO 10664-2014 Hexalobular internal driving feature for bolts and screws《螺栓和螺钉用内板拧的六角花形》.pdf
  • BS EN ISO 10666-1999 Drilling screws with tapping screw threads - Mechanical and functional properties《自钻自攻螺钉 机械和功能特性》.pdf BS EN ISO 10666-1999 Drilling screws with tapping screw threads - Mechanical and functional properties《自钻自攻螺钉 机械和功能特性》.pdf
  • BS EN ISO 10669-1999 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A《自攻螺钉用平垫圈和垫圈组件 常规和大型系列 A级产品》.pdf BS EN ISO 10669-1999 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A《自攻螺钉用平垫圈和垫圈组件 常规和大型系列 A级产品》.pdf
  • BS EN ISO 10673-2009 Plain washers for screw and washer assemblies - Small normal and large series - Product grade A《螺钉和垫圈组件用平垫圈 小号、标准和大号系列 产品级别A》.pdf BS EN ISO 10673-2009 Plain washers for screw and washer assemblies - Small normal and large series - Product grade A《螺钉和垫圈组件用平垫圈 小号、标准和大号系列 产品级别A》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1