FORD SK-M5B9604-A2-2009 PHOSPHATE SOLUTION ZINC ALKALINE CLEANER LIQUID TO BE USED WITH FORD WSS-M99P1111-A 《锌碱性清洗用磷酸盐溶液 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD SK-M5B9604-A上》.pdf

上传人:孙刚 文档编号:748148 上传时间:2019-01-14 格式:PDF 页数:2 大小:19.51KB
下载 相关 举报
FORD SK-M5B9604-A2-2009 PHOSPHATE SOLUTION ZINC ALKALINE CLEANER LIQUID  TO BE USED WITH FORD WSS-M99P1111-A  《锌碱性清洗用磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD SK-M5B9604-A上》.pdf_第1页
第1页 / 共2页
FORD SK-M5B9604-A2-2009 PHOSPHATE SOLUTION ZINC ALKALINE CLEANER LIQUID  TO BE USED WITH FORD WSS-M99P1111-A  《锌碱性清洗用磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD SK-M5B9604-A上》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revision 2009 05 28 N-STATUS No Replacement Named L. Sinclair, FNA 2002 10 14 Revised Updated and renumbered 1981 11 12 ReleaseD SM/EQ 8894 TP Printed copies are uncontrolled Page 1 of 2 Copyright 2009, Ford Global Te

2、chnologies, Inc. PHOSPHATE SOLUTION, ZINC, ALKALINE CLEANER SK-M5B9604-A PHOSPHATE SOLUTION, ZINC, ALKALINE CLEANER, SK-M5B9604-A2 LIQUID NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are alkaline cleaners. 2. APPLICATION These specifications were released orig

3、inally for materials used as an aqueous solution of a metal cleaner in automatic combined dip and spray phosphating equipment. The cleaners are used in combination with Wetting Agent SK-M5B9608-A. SK-M5B9604-A is supplied as a white powder, SK-M5B9604-A2 as a colorless liquid. 3. REQUIREMENTS 3.1 ST

4、ANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITION SK-M5B9604-A SK-M5B9604-A2 (Powder) (Liquid) Phosphate as P205: 16.5 +/- 1.5 % 8.6 +/- 1.5 % Silic

5、ate as SiO2: 14.5 +/- 1.5 % 6.8 +/- 1.5 % Total Alkalinity as Na2O: 42.5 +/- 2.5 % 17.4 +/- 2.5 % 3.3 pH-VALUE 12.7 +/- 0.5 12.5 +/- 0.5 1 % solution in water at 20 C. 3.4 TITRATION 12.5 +/- 1.0 mL 5.6 +/- 1.0 mL Titrate 10 mL of a 1 % by weight solution with 0.1n sulfuric acid (H2SO4). Indicator: b

6、romocresol green ENGINEERING MATERIAL SPECIFICATION SK-M5B9604-A/A2 Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 4.1 The phosphate system

7、 released by these specifications consists of the following materials: 4.1.1 Phosphate Solution, Zinc, Wetting Agent SK-M5B9608-A 4.1.2 Phosphate Solution, Zinc, Start Up ESK-M5B376-A 4.1.3 Phosphate Solution, Zinc, Make Up ESK-M5B338-A 4.1.4 Phosphate Solution, Zinc, Activator ESK-M5B327-A 4.1.5 Phosphate Solution, Zinc, Accelerator S-M5B4509-A 4.1.6 Phosphate Solution, Zinc, Sludge Conditioner SK-M5B9607-A 4.1.7 Phosphate Solution, Zinc, Passivating Solution ESK-M5B326-A

展开阅读全文
相关资源
猜你喜欢
  • ASTM D8131 D8131M-2017e1 1875 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates《聚合物基复合层压制品锥形和阶形接头拉伸性能的标准实施规程》.pdf ASTM D8131 D8131M-2017e1 1875 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates《聚合物基复合层压制品锥形和阶形接头拉伸性能的标准实施规程》.pdf
  • ASTM D8132 D8132M-2017 5625 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement《用渗透性测量法测定预浸料浸渍的标准试验方法》.pdf ASTM D8132 D8132M-2017 5625 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement《用渗透性测量法测定预浸料浸渍的标准试验方法》.pdf
  • ASTM D8133-2017 6875 Standard Test Method for Determination of Low Level Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction&x2014 Gas Chromatography Mass S.pdf ASTM D8133-2017 6875 Standard Test Method for Determination of Low Level Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction&x2014 Gas Chromatography Mass S.pdf
  • ASTM D8134-2018 4771 Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types《联合国IBC设计型式内部静水压试验的标准指南》.pdf ASTM D8134-2018 4771 Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types《联合国IBC设计型式内部静水压试验的标准指南》.pdf
  • ASTM D8135-2017 3125 Standard Guide for Selection of Substitute Non-hazardous Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests《.pdf ASTM D8135-2017 3125 Standard Guide for Selection of Substitute Non-hazardous Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests《.pdf
  • ASTM D8136-2017 0625 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge《用非接触式电容测厚仪测定塑料薄膜厚度和厚度变化率的.pdf ASTM D8136-2017 0625 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge《用非接触式电容测厚仪测定塑料薄膜厚度和厚度变化率的.pdf
  • ASTM D8137-2018 6875 Practice for Accelerated Aging of Leather.pdf ASTM D8137-2018 6875 Practice for Accelerated Aging of Leather.pdf
  • ASTM D8138-2018 3125 Standard Specification for Preformed Silicone Joint Sealing System for Bridges《桥梁用预制硅酮接缝密封系统标准规范》.pdf ASTM D8138-2018 3125 Standard Specification for Preformed Silicone Joint Sealing System for Bridges《桥梁用预制硅酮接缝密封系统标准规范》.pdf
  • ASTM D8139-2017 1250 Standard Specification for Semi-Rigid Closed-Cell Polypropylene Foam Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction《凝土面层和结构建.pdf ASTM D8139-2017 1250 Standard Specification for Semi-Rigid Closed-Cell Polypropylene Foam Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction《凝土面层和结构建.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1