1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 03 21 N Status No replacement named N. Benipal, NA 2006 02 22 Revised Inserted 3.0; Deleted 3.8 and 4 1982 07 12 Released SM/EQ9044 TP Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 1 EC AD
2、DITIVE SOLVENT NOT TO BE USED FOR NEW DESIGN SK-M99J9593-A 1. SCOPE The material defined by this specification is an additive solvent blend. 2. APPLICATION In general the material is used as an additive solvent to improve the leveling of electrocoat primers or to increase the dry film thickness. The
3、 material has only to be used on suppliers request and in an amount to be specified by the supplier in each case. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part
4、producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COMPOSITION Blend of ethylenglycol monoethylether and aromatic hydrocarbons. 3.2 DENSITY 0.92 +/- 0.03 (ASTM D 1298-55) 3.3 DISTILLATION RANGE 128 - 142 C (ASTM D 1078-67) 3.4 FLASH POINT, min
5、 33 C (ASTM D 56) 3.5 REFRACTIVE INDEX 1.425 +/- 0.01 (ASTM D 1218) 3.6 COLOR Water White 3.7 TOXICITY The material shall conform to the safety regulations applicable to the plant and/or country where the material shall be used and has to be labeled accordingly, if necessary. Further the material shall not have an obnoxious or objectionable odor.
