1、 WORLDWIDE FASTENER STANDARD WM 910 Date: 2007-02-01 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 14 PERFORMANCE REQUIREMENTS FOR BODY PLUGS 1. SCOPE This specification covers the performance requirements for automotive-use body plugs required to close out
2、sheet metal holes and slots. Performance is covered in the following sections for insertion efforts, extraction efforts, dynamic water tightness, static water tightness, material aging, paint oven compatibility, sound transmission loss, fire ingress, adhesion of underbody materials, sheet metal tole
3、rances, and paint build up tolerance requirements. 2. REFERENCES Ford Motor Company (FMC) Systems Design Specification (SDS) Trustmark Requirement BY-0053 Standard Circular trademark (e.g. FoMoCo), supplier code, material identification symbols, part number, and cavity or manufacturing number as req
4、uired with FMC Directive E-108, and Engineering CAD & Drafting Standards - E3 and E4. WORLDWIDE FASTENER STANDARD WM 910 Date: 2007-02-01 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 14 of 14 19. CHANGES IN STANDARD Revision Date Revision Description Reason Approved 12-01-2006 Original Version ESSE Global Standards Top 25 Project - Body Plug Standardization with SDS BY-0053 Standard Circular & Slotted Sheet Metal Hole Sizes for all Brands/Regions. GM&FS 02-01-2007 Revision Replaced testing in Section 8 with the requirements in Section 9. GM&FS
